Find experienced local carpenters in Sydney

Provide quote to frame existing wardrobe and cabinets with Tasmanian Oak Veneer | 9mm x 2400x1200mm STD MDF

We are a custom stainless steel drain manufacturer with an over supply of work at the moment and would like some experienced Tig welders to come in and weld some jobs that have been laser cut and folded ready for fabrication. Payment can be negotiated to your qualifications and work out put - lets talk if you have the skills we require Immediate start with flexible times

Hi, I have one wall in the living room with a water damage stain. The leak source has already been stopped/checked. Need a handyman or painter to: 1. Clean/prep the stain area, 2. Apply a proper stain-blocking primer, 3. Paint the wall with 2 coats of topcoat (I need colour matching). Cash or platform payment. Please give me your best quote. Thanks!

I need two stainless steel floating shelves installed side by side on a standard hollow plasterboard wall. Details: * 2 × shelves * 800 mm long each * Approximately 4 kg each (empty) * Install side by side with an even gap * Wall is standard plasterboard (not masonry) * Please locate studs where possible and use appropriate heavy-duty metal cavity anchors where required. * Shelves will display wine glasses and a small vase, so installation needs to be secure and level. Please bring: * Stud finder * Laser level * Appropriate heavy-duty plasterboard fixings (I’ll reimburse the cost if required, or include them in your quote) * All installation tools Please include experience installing floating shelves on plasterboard in your response. Looking for a neat, professional finish. Accuracy and level installation are more important than speed.

The van sustained damage on a recent holiday and I need help repairing it. A wood panel below the murphy bed has come out of alignment and is preventing the bed from folding down. I need someone with carpentry skills to help re-align the tongue and groove panel, and repair or sand back the damage to the wood above.

Install a stud wall in a retail store in Alexandria using pine studs supplied by us.

I need a licensed and insured carpenter to cut and remove skirting board to fit IKEA Pax wardrobe flash to the wall. Fill the gap between laminate and wall with filler, about 1 cm width. Take apart two wardrobes. Assemble and fix flash to the wall three IKEA Pax wardrobes: two 75x236cm wardrobes with sliding doors and one 50x236 wardrobe with a hinged door.

I’m looking for an experienced carpenter or cabinet maker to install a custom timber top over an existing internal window sill in my apartment. The goal is to create a clean, modern timber window ledge/window seat similar to the reference image attached. Budget: $1,200 (Open to Offers) Scope of work * Measure on site to confirm dimensions. * Supply and install a quality timber panel (or recommend the best material). * Cut to fit the existing angled window shape. * Provide a neat 25 mm front overhang. * Finish exposed edges with matching timber edging. * Secure the panel without damaging the existing window sill. * Ensure a clean, professional finish. Approximate dimensions * Front width: 2640 mm * Back width: 2570 mm * Left side: 1120 mm * Right side: 410 mm * Front overhang: 25 mm (1 inch) (Final measurements to be confirmed on site.) Material preference Open to recommendations, but considering: * Tasmanian Oak * American Oak * Engineered timber with matching veneer Looking for a natural timber finish with a clear satin coating. Existing surface * Existing painted/plastered window sill. * Apartment is occupied. * Easy indoor access. * Job is entirely internal. Please include in your quote * Materials. * Labour. * Installation. * Any edging or finishing. * Estimated completion time. Preferred experience Looking for someone with experience in: * Custom joinery * Cabinet making * Finish carpentry Please include photos of similar work you’ve completed.

I have a 60mm diameter hole in a cabinet door (20mm thick) that I want to fill. I have a piece of particle board but I don’t have hole saw or jig saw to cut the piece to plug the hole.

I have a bathroom pocket/cavity sliding door that has come off its overhead track (see photos). I've tried to re-seat it myself without success. There's a wooden trim piece running along the side of the track mechanism that appears to be glued (not just screwed) to the door frame — I attempted to remove the screws but the trim won't budge, which is likely blocking access to the roller/track assembly. This might be a quick fix for someone experienced with sliding/cavity doors, but could also need a bit of carpentry work if the trim has to be carefully freed or replaced. Happy to increase the budget after an onsite look if more work is required. What's needed: -- Assess why the door has come off the track -- Free/remove the glued trim piece without damaging the frame (if needed) -- Re-hang the door and adjust rollers so it slides smoothly Reinstall or replace trim as needed Photos attached showing the door, the track mechanism, and the trim piece.

Got 5 stainless steel benches delivered that need building right now

I’m after a cabinetmaker to build and install a simple cabinet shell and door that replaces an existing shoe unit in the recess behind my front door. What I need: It’s just the outer box (shell) and one full-height door. No internal shelves or anything. We aim to fit ikea wire baskets inside. Key details: • External size: 1600 H x 620 W x 195-200 D mm • No back panel, fixes to the existing wall • Single full-height door, hinged on the lef • White matte flat panel finish to match my kitchen, ideally handleless or push to open • Internal clear width needs to be about 588 mm (so a 16 mm carcass works) A full spec with dimensions, drawings and site photos is attached as a PDF, so please have a look before quoting. Happy to discuss materials and timing. Let me know if you need to do a site measure first.

Carpenter needed to remove part of a bench space in my internal laundry. I am planning on installing a stacked front loader washer and dryer system. I need the marked bench area removed so that this new unit can be installed.

Offer is for a quote. Build a custom joinery against a wall. Will involve two pocket doors- one for an office and one for an actual door.

We require framework on left side of door

Remove sliding drawer and change to 3 x Blum soft close hinges

I want a bathroom cabinet removed and replaced with a bigger cabinet. Old one is 50cm wide, 40 cm high, 15 cm deep. New one is 50cm wide, 60 cm high, 20 cm deep. I’d like to use existing handles. I’d like to add three shelves to bottom of the wardrobe. To use as a shoe rack. The wardrobe has one line of vertical holes for an adjustable coat hanger. I’d like to have another row of holes and three flat shelves added. For shoes only. Open to variations if needed. Thank you.

We’re looking for someone who has a drill and the necessary tools (including anchors) to help install a bathroom cabinet before 5PM today. The cabinet size is 60 x 17 x 75 cm. We’ve already drilled some holes, but they may be too small and might need adjustment. Please let us know if you’re available and your rate. Thank you!

We are a fun & creative client with a Surry hills terrace in need of some touch ups, and with some carpentry projects to do over next few months. Looking for carpenter / cabinet maker / handyman / builder for things like: - hiding cables behind walls/render - fix leaks/waterproofing issues - support design, fabrication and install of new doors (internal and external) - painting and skirting and render patch ups/ clean ups - trade coordination for other projects like painting and electrical work We are not in a major rush, but can move quickly if we can find the right person / skills and supplier connections. Hourly rate or project based pricing, as preferred.

Fixing and repairing timber balcony