Find experienced local tradies in South Sydney Municipality

I need someone to seal the cut/join lines in the exterior render of a commercial building to stop water getting in. There are multiple saw cuts / control joints in the render around the facade. These need to be filled with silicone (or similar flexible exterior sealant). It doesn’t have to be pretty or perfectly neat – the main goal is to stop water penetration, not to create a decorative finish. A scissor lift will be supplied for access to the upper areas, and work can be done at any convenient time.

Hi there, I’m looking for a handyman to help with a couple of jobs in my apartment. Job 1 – Roller Blinds I attempted to install zero-gravity roller blinds but couldn’t drill far enough into the concrete wall (due to lintel) to securely mount the brackets. Blinds are already on site and measured — they just need proper installation and adjustment (installed right now but not a great job) Job 2 – Ceiling Repair & Painting We recently had ceiling fans installed and there are some holes / damage in the ceiling drywall that need repairing. • Patch and sand ceiling drywall • Paint the repaired area (paint supplied) Notes: • You’ll need your own tools (hammer drill, masonry bits, patching tools, etc.) • Paint will be supplied • Apartment is on 3rd floor - no lift Ideally looking for someone experienced with blind installation and minor plastering/painting. Happy to answer any questions

Two small jobs in one: 1) Remove bottom 15cm of 275cm brick wall (loose as seen in pictures) and apply new render. No painting needed. 2) Apply new plaster to 120cm x 90cm area in bedroom where it fell off. Area includes on ceiling light and one edge as pictured. No painting needed Note: budget and scope is both jobs, do not want to separate. Preference is for job to be done after January 8th.

Note: This can be completed on weekends or at odd hours. Working hours are flexible. We need an experienced acrylic renderer / solid plasterer to patch and tidy up visual defects only on the front facade of an old two-storey commercial building. The work is mainly to the edge of the first-floor slab/beam under the windows and the corner (see photos). The coating has peeled and cracked in sections and there is a damaged corner and a few other sections. This is a cosmetic repair only – just making it look neat and uniform again. Scope of works: • Inspect affected areas shown in photos on site • Scrape back and remove all loose/flaking paint, render and texture coat • Patch and fill damaged areas (including the chipped corner) with suitable exterior repair mortar/patching compound • Re-render/skim with acrylic render or compatible exterior product to match existing profile as closely as practical • Sand/prepare repaired areas

Three holes in gyprock wall need repairing and painting . Holes are roughly 100mm squared . One rounded hole as pictured and two similar linear holes shown in other photo.

Old leak fixed but never painted over, looks like gyprock ceiling

Some holes and scratches in gyprock walls need to be repaired , nothing bigger than 100mm squared . we have the paint required for painting over after

I have done a lot of the gyprocking and have hit my limit. Need someone to come and finish the job. - all walls are double gyprocked with soundcheck - need someone to come finish the job in the inside + plus setting.

Need to move 1200 x 3000 gyprock sound check up some stair at an annoying angle. Need strong and professional.

I need someone to get some gyprock sheets and deliver them two blocks over. I’m very close to Bunnings warehouse. I just need them today and I don’t have means to transport - about 12 sheets cost of materials not included in price of job :).

Built in wardrobe sliding mirror door not sliding smoothly (Only 1 of 2 doors not sliding smoothly) also side panel of the door is coming apart.

Fix one power point in living room . On site parking is available.

Need help fixing a patch of ripped drywall paper

Remove and patch two screws from a gyprock wall. Paint supplied.

We are interested in having an external awning fitted (cantilevered), but are concerned there are not enough bricks to support the weight (76kg). There will be 3 courses of bricks above the awning at the north end and 5 bricks above the awning at the south end. Can anyone advise for a reasonable price?

- remove 2x wardrobes, patch and square set walls around it ready for wardrobe installation - wardrobe 1: 3.0m x 2.6m - wardrobe 2: 1.4m x 2.6m; this smaller one needs to demolish small gyprock section (~ 1.2m x 0.3m) to make room for taller robe. See pic where I note the section to be demolished - terrace house - wardrobes on 2nd floor - materials to be broken down to fit skip bin - can discard rubbish safely thru balcony direct to backyard, in designated area ready for self organised removal - I will organise rubbish removal separately

I have a motorised awning that’s half completed and needs two people to mount on the wall and complete My friend is available to help on Saturday after 8 or Monday Tuesday after 4.30

Looking for some quotes for awning installation on my camper van with no roof racks

I have 2 holes in the ceiling about 7cm across and 3 holes in the wall about 5cm across

Patch up and paint broken plasterboard about 10cm x 10cm