Find experienced local tradies in Greensborough

Replaced caravan awning fabric but drum tension not right. Need help getting it to retract. At the moment we can only manually roll it by hand. Awning is not electric. Please help!

I have 2 box airconditioners, one split system and one exhaust fan that need to be removed and plaster and brick patched, then brick rendered.

Cut Plasterboard Sheets Into Ceiling Tiles We are renovating a commercial premises and need someone to cut plasterboard sheets into new ceiling tiles for an existing suspended ceiling grid. We will be using standard plasterboard sheets measuring approximately 2400mm x 1200mm. Each sheet needs to be accurately cut into 1200mm x 600mm ceiling tiles. We will need approximately 180 ceiling tiles in total. The job involves: * Measuring and marking plasterboard sheets * Cutting sheets neatly and accurately into 1200mm x 600mm panels * Keeping edges as clean and square as possible so the panels fit neatly into the existing ceiling grid Optional additional jobs: * Remove the existing ceiling tiles from the suspended ceiling grid * Paint the new plasterboard ceiling tiles prior to installation Please let us know if you can also complete either of the optional jobs and include these as separate prices in your offer. Location: Greensborough, VIC Please include in your offer whether you have your own tools and which parts of the job you are able to complete. $350 for labour $1500 to include labour and materials for 180 tiles

Looking for an experienced plasterer to complete plastering works on a residential Renovation . Scope includes: • Living area – plaster 2 x bulkheads • Kitchen – plaster LVL beam • Carport – square set finish, laser levelled battens, 10mm Aquacheck ceiling lining • Both bathrooms – laser levelled battens, 10mm Aquacheck wall lining • square set and laser battern rest of the house Site is ready for plaster (frames straight, substrates plumbed). Please quote based on the above scope Price will be discussed

Room is 3m x 6m. I need plasterboard tapping and jointing. Walls and ceiling. Plasterboards are new, i just need someone to joint them, etc. Ideally on the weekend.

I would like to plaster one section of the exposed roof with gyprock pannels

I need a wall rendered to cover the join in this brick wall. Roughly 3 metres high and the decked area (full wall) is about 3.5 metres wide… the section around the door is about 2.8m wide

Remove existing ceiling Supply all materials Install new plaster ceiling Ceiling size is approximately 3.5m x 5.4m. Please quote including labour, materials, and disposal of old ceiling material. Location: Greensborough Would prefer someone with previous ceiling replacement/plastering experience. Open to quotes/price negotiation.

I need someone for plastering my wall. My wall materials are brick. I did the main walls and there is a small pieces that you can see on the attached photos. I want to cover all walls with plasters. We have a lot of plasters in side and also we have corniest cement for attached the platers to wall.

Need someone to plaster the walls of 3 rooms and also the ceiling of the living room. Tiles and plaster will be removed from laundry prior. Plaster boards to be provided.

I need a licensed electrician to do the final set up of my kylin sauna. This will include wiring the light and heater, which I was told must be single phase.

I'm looking for someone to finish some light plastering & sanding, then painting of our bathroom, ensuite and toilet, plus the painting of the ensuite door. We can provide the paint. Approximate Room Sizes; Bathroom 3.6x2.3m Ensuite 1.9x1.6m Toilet 2x1m See photos attached.

I need Rendering done at my house in Greensborough….i just want the front of the house done. Not the sides. The Back of the house is already done.

I have a small outdoor repair job: A painted timber beam at the front of my outdoor area has pulled slightly away from the timber behind it (likely from wind). it is still solid — it just needs to be pulled back into place and re-screwed using new holes. The metal bracket holding up a retractable awning has also come loose. The bracket is fine — it just needs to be re-positioned and re-fixed into solid timber. This is not a rebuild or replacement. No materials needed — just tools and fixings. Should be a quick job for someone handy with a drill and ladder. Photos attached.

Home reno, Wall plastering and conices.

We are doing a small extension to our pantry area which is about 2.4m x 1m wide, with a height of about 2.4m too. Flooring has been done. Need a plasterer to come and finish the job. Plasterer needs to get all the materials required to do the job. Work involves adding a floor trim too (provided) and sealing all corners. PS : I also need a couple of vents in the wall for the dryer and the kitchen exhaust. I don't know if that's easier done after plastering or need to factor that in before.

Need a couple of minor cracks fixed. Easy access and I’ve got the paint too, just need a hand with this while I’m busy with the yard this week.

Move PowerPoint on wall approx 20cm lower on plaster wall. Need the original placement to be plastered over (flat) so we can hang a TV bracket over it. Reason: our TV hangs below the mantle piece. This is because the power point is in the way of where the TV bracket needs to be.

Supply and replace verandah post including anchor. Remove old post and anchor. Painting not required.

plasterboard patchup boxed bulkhead app 1900mmx 300mm