Find professional garden shed repair near you

I am planning to order a garden shed and looking to get quotes to assemble it. Plenty of space is there at my backyard. I can put the concrete pavers if that's make things easier for you.

Stratco Handi-Saver Garden Shed needs installation have tried unsuccessfully to install ouselves the shed is partly put together might need to dismantle and start again.

Few parts to this job: 1) Erect 3 x garden sheds (1.1m x 2.1m x 1.8m) from EasyShed/Cheapsheds at the side of the house (2 in front and 1 behind gate) 2) Supply and install 600x600 pavers as base for 1 of the sheds (the other 2 sheds are on existing concrete in front of the house) 3) Soil compact (no gravel needed) and level for the shed with the pavers 4) Erect larger back garden shed which I've started but butchered. More details from an older post I made below. Will need pad levelled and shed installed on top of that. I've only assembled 1 panel of the shed before realising my limitations :-) I've laid the pad, including wire mesh, but am having difficulties levelling it. It's for a shed, 3m x 1.5m I've tried just a cement and sand top part but I don't think that's good enough or will hold. Need someone who knows what they are doing to fix it up nice and level

Assemble a garden shed 1.5 x 1.5m

Need to setup a garden shed. 3m x 2.25m Gable Roof Shed. Brand: Easy Shed. The area is in the Picture attached. its a artificial grass. one side is 2.2 m which is .05 m smaller then the shed. May need to break the paving or I am also open to suggestion to put additional paving on Artificial grass. Looking for a cost effective solution here. the height from grass to paving is 3cm. Please let me know for any other details.

The garden shed of size 3.75 * 3.75 * 2 meters ( approx) need to move to another location in the same backyard.

Looking for someone to prepare a level base and assemble a Keter garden shed in my backyard in Everton Hills, Brisbane. Scope of work: Ground preparation: Prepare and level the existing soil area for the concrete slab. Concrete slab: Supply materials and construct an approximately 2.0 m × 1.3 m × 100 mm concrete slab, including suitable reinforcing mesh/rebar and appropriate concrete base preparation. Shed assembly: Assemble the Keter garden shed according to the manufacturer's instructions and secure it appropriately to the concrete slab. Finishing: Leave the area tidy and ensure the slab is level and suitable for the shed. Position the shed as close to the fence as practical while allowing for proper installation and access. Keter’s quoted installation time for this shed is approximately 2 hours. Thanks!

I have a Garden shed at home that needs completion. All the wall panels and roof panels are built but need help to put it together and finish the job. Model - 1.5m x 2.25m Skillion Roof Shed (from Easyshed)

Disassemble garden shed and remove concrete slabs skip bin provided.

Need someone to build a garden shed and anchor to the concrete ground. https://www.gardenshedsgalore.com.au/product/flat-roof-sheds-2250-x-780-x-1820-h/

I have a garden shed that needs to be assembled and installed. It’s 2.25m x 1.5m. Brand is Easyshed.

Giantz Garden Shed 2.58x2.07M Sheds Outdoor Storage Workshop Metal Shelter Sliding Door Half built need someone to finish the job today

Assemble a brand new garden shed, in its box onto an already prepared base. Shed is as per pic

I’m looking for an experienced handyman or shed installer to assemble and install a brand-new EasyShed Flat Roof Garden Shed (Model EF-S1508) at my property in Malvern East. Shed details: * Model: EasyShed EF-S1508 * Dimensions: 1.51m (W) × 0.78m (D) × 1.82m (H) * Brand new, supplied flat-packed with assembly instructions * Concrete fixing kit already purchased Scope of work: 1. Fully assemble the shed according to the manufacturer’s instructions. 2. Position it on the existing concrete surface (location marked in the attached photo). 3. The concrete surface has a slight slope, approximately 25mm height difference across the 1.5m width. Please allow for suitable levelling using durable, non-compressible packers/shims if appropriate. 4. Securely anchor the shed to the existing concrete using suitable fixings. 5. Ensure the shed is level, stable, the door operates correctly, and the installation is weather-resistant. Important notes: * No new concrete slab or cement work required. * The existing concrete drainage slope should be maintained. * Please bring your own tools and any suitable levelling materials. * I can provide the shed assembly manual and photos beforehand. Please include all labour and any additional levelling materials in your offer.

Task: Assemble Garden Shed I’m looking for someone to assemble a garden shed on carport at my property. Details: - Shed size: 2.25 x.78m - Location: Mermaid Waters - Assembly required, including securing the shed in place. May need to remove shelf. - All tools and equipment to be supplied by the tasker - Please provide your quote. I’m seeking a reliable person with experience assembling garden sheds able to complete in 2 hrs

Remove 2 Locked Shed Door Handles & Install New Handles I need someone experienced with locks/handyman work to remove two locked door handles from the same garden shed and install new replacement handles. Both existing handles are locked and the keys are inside, so they will need to be safely removed (e.g. drilled out if necessary) without causing unnecessary damage to the shed doors. Job includes: * Remove both existing locked door handles * Install two new replacement handles * Ensure both handles are secure, aligned and working properly * I will supply the replacement handles Looking for someone experienced with locks, door hardware or general handyman work who can complete the job neatly and ASAP. Please let me know your availability and whether you have the tools/experience to remove locked handles.

Looking for someone experienced with garden shed installation to assemble and install a new EasyShed 3m × 2.25m Gable Roof Garden Shed. The shed has been purchased and will be supplied flat-packed with the manufacturer’s assembly instructions and components. Shed details: * EasyShed Gable Roof Garden Shed * Size: 3.0m wide × 2.25m deep * Standard height: approximately 2.05m * Steel construction * To be installed and securely anchored to the concrete base Fixings already purchased: * EasyShed Concrete Fixings – 8 pack * Quantity: 2 packs (16 fixings total) The task includes: * Unpack and check shed components * Fully assemble wall, door and roof panels * Square and correctly align the shed * Assemble and adjust doors so they open and close properly * Install roof, ridge, flashings and associated components * Position the completed shed correctly on the concrete base * Drill and securely anchor the shed to the concrete using the supplied EasyShed concrete fixing kits * Leave the shed properly aligned, secure and complete in accordance with the manufacturer’s instructions * Remove installation packaging/offcuts and leave the area tidy Please bring all tools required for assembly and drilling/fixing into concrete. Prefer someone who has previous experience assembling EasyShed or similar metal garden sheds. Product: EasyShed – 3m × 2.25m Gable Roof Garden Shed.

3.75 x 2.25 easy shed installation

Build put together garden shed Absco Sheds 3.0 x 2.26 x 2.0m Classic Cream Premier Double Door Garden Shed

I’m looking for an experienced shed installer to assemble a flat-pack garden shed. The concrete slab is already complete, and the shed is on site and ready to be built. I’ve attached an image showing the shed and its dimensions. Please only apply if you have previous experience assembling similar sheds , have all the required tools and positive Airtasker reviews for this type of work.