Find a reliable appliance technician in Clayton South

I need a qualified professional to carry out the following tasks at my property to meet safety and functionality standards: 1. HWS Flue Terminal Clearance The minimum clearance from the Hot Water System (HWS) flue terminal to the drainpipe must be 150 mm. The current pipe position does not meet this requirement. Please reposition the drainpipe to ensure the 150 mm clearance for safety compliance. 2. PTR Valve Insulation There is no Pressure and Temperature Relief (PTR) valve jacket installed. Please install the appropriate PTR jacket insulation to the PTR valve. 3. Gas Cooker Regulator Replacement The gas regulator on the cooker is faulty and cannot adjust the working pressure to 1 kPa. Replace the regulator with a new, functioning unit.

I have a Miele dishwasher model G5210SC, recently noticed some whirring noise when it is in operation. Usually the noise lasts for a few seconds to a minute or so and it will disappear and later on during the wash cycle it will come again then disappear. I have uploaded the video so you can hear what the noise is like. The machine is just over 2 years old so the warranty has expired. https://youtube.com/shorts/NWnqq7-QdVI?si=FS2VWiTl6YJZjIqK

Oven smelling funny, deep cleaned but has rubber smell when on fan grill etc. Blanco brand

Transport co2 gas from Clayton South to Footscray in an open air ute. The gas will need to be secured.

Dishwasher isn’t working, fix it

Getting error E02 on Bosch series 6 dishwasher. Troubleshooting shows heat pump issue. Want someone who can repair and fix this completely without any error. At end of cycle when it start drying it shows this error

one of the gas burner is playing up. need to fix it asap

One of the gas burner not working, doesn’t stay lit

Hi, I currently have a standard doorbell installed, but I’d like to replace it with an Arlo Doorbell. The existing doorbell is positioned quite low on the wall, so I’d like the new one to be mounted higher. This will require drilling new holes and connecting it to the existing wiring.

CONNECT GAS PIPER TO BURNER. AS SHOWING IN PHOTOS. WE SUPPLY THE BURNER. GAS FITTER SUPPLY THE REST OF THE ITEMS AS REQUIRED. THE PHOTO IS OLD MACHNIE WE GOT FOR EXPLAME ONLY CAN INSPECTION TO LOOK AS A REFERENCE.

Samsung washer door seal torn. Got a replacement seal. Need help to replace the torn seal with the spare. Work include dismantling the necessary parts, change the seal and put back parts to ensure washer is working as required. Must have experience on such seal replacement done before.

The issue is with the lighter. It just fully malfunction last Monday. Before that we had to do few times to get the lighter. It does not ignite and make fire.

Removal of 54cm freestanding dual fuel oven and replace with a new one

Removal of 54cm dual gule freestanding oven and replace with a new one

I have 4 security cameras, a floodlight camera and a doorbell installed and wired up. The doorbell is already installed and on battery, but I would like it wired. It's positioned right next to the fuse box. Pictures show the locations I want the cameras installed. The floodlight will be under the porch, there is currently no wiring in that area. The house is in 2 sections, the original house and the extension. The extension has a tin roof that can be difficult to get in. I will also have a future job installing new smart downlights throughout the house that I would also like to get a quote on when you do this initial job.

Hi, how are you! I need help to install an outside security camera I bought from Bunnings. It would be great to get a second opinion on where to position it Please ask questions! Have a nice day

Need to fit a washing machine and water inlet connection

Need an experienced plumber to fit a washing machine and a heat pump dryer into a tight laundry space. Appliances are 600 mm x 650 mm, with the dryer stacked on the washer. Current space is 710 mm (width) x 680 mm (depth), but two wall-mounted water taps protrude 140 mm, limiting available depth. Require tap repositioning/modification to fit appliances without obstructing the door. Appliances are purchased and need proper fitting before delivery. Contact for a site visit, availability, and a quote.

Task Title: 🔧 Fix Haier Washing Machine – Child Lock Stuck & Unresponsive Task Description: I need someone experienced with Haier front-load washing machines to help me fix the following issue: • Machine is stuck on “Anti-Crease” mode, showing “0:09” on the display. • Child lock is active — none of the buttons are responding. • Tried turning it off and on, unplugging it, and adjusting settings, but nothing works. • The machine is making noises like it wants to start but is stuck. • Model: Haier front-load (exact model can be provided if needed). Located in Clayton south Would prefer someone available ASAP.

I had almost new clothes dryer which suddenly stopped working I want it to be fixed most probably I am missing a socks so maybe it is stuck in there so it can be a quick job but not sure.