11 Windows and Doors Experts in Alphington (Repairs, Fitting, Replacement)

Looking for someone with tools and know how to relieves a roller garage door, one end of which has become higher than the other. Looks like a relatively easy job on YouTube but given the tight cables and springs, need someone who knows what they’re doing.

Two door handles requiring replacement latch bolts. Rest of door handle is functioning Measurements are as below: 60mm to centre of handle 56mm strike plate

Hi - I have vacated my rental house in PORT MELBOURNE!! (NOT ALPHINGTON the ad won't let me input the correct suburb!!) and my dog has left scratch marks and removed the paint on two white older doors. Looking for someone to fix this and provide a quote ASAP. Happy to send photos of damage thank you!

Replace current sliding door to Double Centre Opening Single Lite Timber French Doors. Please refer to photos. Two images are existing doors from inside and outside. Third image is the new style to be installed. Existing security door also to be removed. Painting required. Current door is 1800 W x 2100 H.

the remote works intermintently to open and close garage door. The fixed button always works. Tried a new remote, electrician looked at it and still no good. Not sure if I need a whole new opening mechanism

Mount KeySafe on brick wall outside door of unit in Alphington. See pictures. This key box needs to go on a BRICK Wall securely.

- Remove existing window frame, supply replacement and install. Full frame size approx 1.8m x 1.5m at rear of house - Install safety glass in window - Install safety glass in Wood Door 2 panes - approx 59x53 and 59x122

Need some bathroom work done today: - Change door opening side from left to right (swap hinged side) - Drill a few holes in the bathroom tiles - Patch up old screw holes in the tiles and wall

Assistance to finish making aluminum fly screens for two windows. Remove old lock and replace with new. All equipment and tools supplied.

- Problem: Glass mirror has come off the frame and there is a large gap between them. Solution: needs to be resealed - Problem: the rolling sliding door does not slide smoothly across. Solution: needs to be smoothed to ensure the door can move across easily and smoothly.

Wanting to seperate a room by using glass wall partition and door to acces the area

Cavity sliding door fallen of hinge and was very hard to operate prior. Need to fix. See attached photo.

We have a large dog door for installation into a stud wall, plasterboard interior, render exterior, polystyrene insulation, 200mm wall depth. Aluminium door and tunnel - tunnel may need to be cut to size.

Replace mirror sliding wardrobe doors to standard white melamine hinge doors. See attached photos.

Wash tiles under the pergola with high pressure cleaner and subsequently apply solution and wipe it dry. Cleaning solution provided. Need to remove items such as a bench, bbq, light table prior to cleanig. I will lend a hand.

There is one door in a bedroom that needs to be plained down to close. Thre is a section of the shower that needs to be re-caulked.

Current seal is peeling off. Re-seal with good quality rubber / plastic seal.

I need the right hand panel (approx 60cm x 60cm) replaced with glass and circular cut out for window exhaust fan. Would need to measure exactly. This is to mount a Clipsal 7005A Airflow Performance Exhaust Fan, Window Mount, 150mm. The installation guide says a 212mm circle needs to be cut in the window. I want the circle cut as close to the right hand side as possible. The item is approx 245mm x 245 mm. https://www.sparkydirect.com.au/p/7005A/airflow-7005a-window-exhaust-fan-axial-150mm-auto.html?gclid=EAIaIQobChMIroj67dWt6QIVwzUrCh3dpQ6fEAQYASABEgJMofD_BwE https://download.schneider-electric.com/files?p_Doc_Ref=CLPDOC_W0000677&p_File_Ext=.PDF

I have quite a damaged door that I’m hoping someone can fix? Or help me replace? Any time between now and July 29th. Any day. Weekdays after 6pm or any time on weekends. Door is: W80.5cm x H200cm x D3.6mm

Looking for someone to install (and ideally supply) a peephole/door viewer. This is for a 40mm door, and it will need to be a 12mm viewer. If needed I can supply the viewer, but it might take a day to pick one up from Bunnings.