21 Windows and Doors Experts in Albert Park (Repairs, Fitting, Replacement)

Need some run silcone between weather board between and windows doors. Only a 4 metre distance .Only one weather board only. . Need a person whom will do a neat and tidy job.

Need to hang 2 wood doors with glass in middle. Doors need to be trimmed and hung. All materials available onsite

Repair rotten doorpiece/2 door handles/spot paint

My backdoor isn’t locking properly, it’s a twisting mechanism that’s jamming somehow.

Need a doorbell screwed into a wooden front door area (Amazon Ring). Probably just need a drill

Verandah posts x 2- some rot at base to be repaired. Add new hardwood skirting to each. Fence- add new 31 x 18mm trims to 3 sections of fence. Weatherboards. Replace approx 9 short lengths at corner. Adjust gutter over to stop water entry. Door-remove, repair small section of rot, replace flush bolt and weatherstrip (supplied). Put back with new hinges (supplied).

I have a replacement privacy set - the old handle is broken and just needs to be replaced with the new one.

Old door jamming may need rehinging

We need to measure, order and installations security doors for front and back doors.

I have had the house painted and need the door handles put on to existing doors X 4. Some chiselling required to fit locks. Have the locks just need somebody with the know how. Also a couple of odd jobs replace draft strip. Help hang wall hangings.

Supply & fit new external fly screen door hinges as shown in photos. The old hinges are slowly falling apart. Would be good if you can do it anytime between now and this Sunday. The house is situated in Albert Park

Supply & fit new external fly screen door hinges as shown in photos. The old hinges are slowly falling apart. The house is situated in Albert Park

I need x2 doors cutting down. I have already measured where they need cutting. VERY simple and quick job for somebody with the right tools. They are the small doors that go above the range hood

We have a wall mounted indoor clothesline, pictured as the grey strip. It is designed to be mounted at four points along its 1.6m span. It's currently hung with four plasterboard anchors however they're just not strong enough, there's a stud just to the left of it, which may be steel. (it's not critical that it is there, any location around there ish is okay, will be happy to take advice). At the time we didn't have anything to handle that and I was concerned about hitting wiring. I'm a paraplegic guy too so I'm a bit too short to fix it! Would love some help remounting it, and I can deal with patching the wall afterwards. So- Dismount the line with the current wall fixings, Confirm a better spot to mount it in the area, and remount it on the wall. Another set of anchors should also work given it's designed to be mounted to plasterboard with no stud. The model of thing is called Designerline if you want to check out how it attaches beforehand. Approx 30min work?

Aiming for Monday 5th August 2018 or sooner. Size appears to be 67cm x 43cm Picture attached. Job is supply and install.

The door has come off its tracks and seems to be jammed.

On street parking and please remove packaging

I have an old door in my rental and one of the panels of glass is cracked and needs to be replaced. Door is timber. Glass panel is 550 x 150 Timing is flexible, just need the job done in the next two weeks.

The doggy door is a glass specific one for double glazed doors just need it fitted :)

Part of our internal Wal is glass. The glass pane needs to be removed and disposed of.