Find a professional internal door contractor in London

We temporarily removed a standard internal door to move a large piece of furniture out of the room. We are now struggling to re-hang it correctly, it is not levelling up properly and will not close smoothly in the frame. The door, frame, hinges, and screws are all original and on-site. No trimming or planing should be required, as it fit perfectly before removal. Just needs an experienced eye to align the hinges correctly and get it closing properly.

We require x5 internal doors to be trimmed from the bottom and any rough edges to be sanded down, for increased ventilation / air circulation. x2 bedrooms doors and x1 kitchen door by circa 12mm, x2 bathroom doors by circa 15mm.

2 Internal doors for 2 bathrooms including handles. I have all the materials.

Door frames and new doors to be installed * Removing the existing door and lining * Preparing the opening * Installing the new door lining/frame * Making it perfectly plumb, level and square * Hanging the door with the correct gaps * Fitting hinges and latch * Fitting handles * Installing architrave * Scribing/cutting the architrave neatly around uneven walls/floors * Filling and finishing joints * Making sure multiple doors throughout the house all line up consistently

Buster and Punch door handle needs to be fitted on internal door

Fit 4 internal normal doors Hinges and latch/handle provided Need equipment for cutting door and lock hole Previous doors can be removed before hand

The door is detached at the moment I need it to open from the left to right (atm it has fixtures like the latch on the left of the door frame, basically pop that on the other side)

The door hinges have become damaged and are pulling away from the door. The timber around the hinge fittings also appears damaged, causing the door to hang incorrectly and preventing it from closing properly. The hinges might need to be replaced.

A small job for an experienced carpenter/joiner to hang a new internal door. The door has already been planed to size and fits the opening, so won’t need any resizing or trimming. I just need someone to: * Fit and recess the hinges into the door and frame. * Hang the door so it is straight, flush and operates smoothly with even gaps. * Fit a pull handle to the door (pull handle only – no latch or lock mechanism). The frame is already in place, and the door is ready to be hung. I’ve attached a photo of the opening. Tools: * I have tools available, including a planer and chisels. * Ideally, you’ll bring your own professional tools. Parking: * I’ll cover the cost of parking. Looking for: * Someone with experience hanging internal doors. * Attention to detail – I’d like the door aligned properly with clean hinge recesses and a good finish. Please let me know your experience and, if possible, include photos of similar carpentry work you’ve completed.

I need a door fitted on my bedroom door

I would like some v grooves added to 6 internal doors to achieve the look attached

I need 3 internal non fire doors hung and handles fitted. Doors are lightweight from wickes. Please don’t offer ridiculous quotes.

Changing internal door hinges to modify opening side. No new part requires but a new hole for the handle and hinges will need to be made. Flexible on price as I’m unsure how much labour this entails

I have all materials for 8 internal doors to be hung and fitted. I have handles for all and locks for (3doors).

Replace 3 existing doors 2 bedroom and 1 bathroom to be hung and fitted with locks and handles

Hang three internal doors

Looking for someone to fit door furniture to 5 original timber internal doors. 3 x doors need standard lever handles fitted (existing latch cut-outs already in place so hopefully fit the same). All existing hardware removed. 2 x doors require round doorknobs and tubular latches fitting from scratch (holes to be drilled and latch recesses cut). Looking for someone with experience fitting internal door hardware. Thanks

Need 4 internal door handles installed. The old handles and latches have already been removed, so the job is to fit the new door handles. Please note that the new latches are a different size from the existing latch cut-outs, so some drilling or minor adjustments may be required. Looking for someone with experience fitting door hardware and who has the necessary tools. Please message me with your availability and a quote.

Hi all! I have a door, unsure wether it is the right size so will need to maybe be cut down. I have hinges and the handle needed.

Job is to swap back and re-hang the internal doors replacing the current fire doors. Including opening up a stud wall and putting double doors in the dining room. The doors are labelled as to which one goes in each room, so they should fit okay. These are the old doors originally present. So each of the doors will need to be re-fitted and all the doorways made good. Just as a note, some of the doorstops may need to be changed. With a few holes being filled where the door closers were. I would expect a job to take two days for someone that knows what they’re doing. Price is for labour happy to pay for any materials required. You’re welcome to use either the hinges fitted to the doors or the hinges fitted to the fire doors. There’s approximately nine doors, see photo