Book professional blind repair service in Central London

Three recess-fitted 50mm real-wood Venetian blinds (warm brown slats, dark brown cloth ladder tapes), each roughly 110 cm wide x 155 cm drop, inside brick window reveals. The lift and tilt cords have gone on all three so they won't raise, lower or tilt closed. Need all three restrung so they raise, lower and tilt properly, plus one split slat near the bottom replaced (or moved to the bottom / removed if a match isn't available). Ladder tapes are intact. Please bring cord to suit 50mm wood slats. Photos attached. Address: Durango House, 5 King Edwards Road, London E9 7SG.

Re attach two pulley rollers onto two blinds

Roman blind chain mechanism needs repair

We have a velux window blind that needs fitting to the window. However it's high up - we have steps, but don't feel comfortable doing it. It needs screwing into the window frame. We have all the kit - drill, countersunk screws - it's just beyond my confidence.

Labour only. Install 6 sets of Venetian blinds. 2x150cm 2x90cm 1x120cm 1x60cm. Standard drop 150cm

Install two roller blind exact

I need a roller blind put up, will need to bring ladder, i have attached the details. Ceiling height is 2.5m so will need to bring a ladder!

moved into a new house and need blinds fixed , thye dont go up / string broken etc

I have 2x Roman blinds that I need hung - the windows are reasonably high so a step ladder will be required

Remove two existing recess blinds and install (with screwdriver) new recess blinds

4 blinds need to be hung in bay window and side window of one room.

Our blinds fell off the wall and they need to be rehung

I need someone to install two 1m wide blinds on a window. They would need to remove the previous blind holders, check if the holes could be reused or sealed them and drill new ones before mounting up the blinds. I also need them to drill a few holes to hang up a mirror in the same room

I have bought paper blinds and have holding rods, but need help installing them and ensuring a clean finish (sealing the paper around the rods, making sure they all look even) - the blinds need cutting to size and then sealing to create the tubes that hold the rods, and then putting up on the window - they don’t need wiring or anything and there are 6 in total

We are an interior design studio with and office and teams both in London and Bahrain. We are working with a client who is developing an apartment in North London N20BN, and the curtains are being made in Bahrain at our office in the middle east, then shipped to London. However we are using all of the Somfy motors for the curtain tracks and also roman blinds + roller blinds. We require an installer / fitter who work with Somfy control and track system would we could engage to assist in setting these up for the client? There are 7x pairs of curtains and 16x blinds to install. all of which would need installation and then programming on the Somfy system. I think two taskers would be required and must have experience of Somfy for installation. Likely would be several days work - tbc Thanks so much in advance and very grateful.

We need roller blinds to be hung on 4 windows in our studio - the blinds also need to be cut to size.

One of the chords has become a little bit tough to pull and that has resulted in it becoming unsecured on one side at the top of the blind. Blind needs securing at the top and lubricating.

I have a privacy blind I need installing on my patio terrace

Pls see photos! I have 4 Blinds2Go brackets to put up. 3 windows measuring the same and 1 larger window.

One of the chords of my blinds is fraying. They are not nylon. Might be cotton? Needs repairing. The remaining 3 blinds require inspection and repair as required.