Find a professional local carpenter in West London

I need to paint my kitchen joinery. It is currently a wood texture, most likely a laminate. I would like to paint over it all.

I have a custom built in wardrobe that we DIY’d. For the drawers I used IKEA PAX drawers that we altered to fit our dimensions but they’re not strong enough and have broken. I want someone to build me new ones that are more solid and will sit on fresh tracks to stop the jamming and splitting I’ve experienced. Some urgency as I currently don’t have functioning drawers. I value quality and experience - please don’t send me a generic message if your experience is only flat pack furniture etc.

Carpenter / woodworker / joiner required to make 94 custom timber roof dentils. Urgent start, must be available to complete work quickly. Looking for a carpenter to manufacture 94 decorative roof dentils. The dentils have a curved profile (see attached photos) and come in four different dimensions: 69* 300x140x100mm 7* 280x140x100mm 4* 400x140x100mm 14* 510x140x100mm These must be made from solid hardwood, primed and finished in a quality, weatherproof outdoor white paint. Delivered to site in Barnes SW13 London. If this project goes well client has a kitchen job coming up which they can show you.

Urgent start. Carpenter / joiner required to make 94 custom timber roof dentils. Must be available to complete work quickly. Looking for a carpenter to manufacture 94 decorative roof dentils. The dentils have a curved profile (see attached photos) and come in four different dimensions: 69* 300x140x100mm 7* 280x140x100mm 4* 400x140x100mm 14* 510x140x100mm These must be made from solid hardwood, primed and finished in a quality, weatherproof outdoor white paint. Delivered to site in Barnes SW13 London. Budget for this job: £1200. If this project goes well client has a kitchen job coming up which they can show you.

Looking for someone to help finish my IKEA kitchen insulation. Ideally joiner or someone experience building kitchens. These jobs need done, and need someome with their own tools Kick plinth Adjust 4 upboard door fronts not aligned Fit rest of doors ...4 Fit washing machine End panels Box in where old washing machine went

1) My stairs have been stripped to bare wood and as it's creaky, a few steps needs to be nailed/fixed to eliminate the noise – there are 13 steps in total. 2) I would like to see if it's possible to sand the steps to natural wood and have a runner put in (leftover grey carpet) so this work requires an experienced specialist. 3) Also, I need the stair hand rail installed, the kit is already delivered to the property.

Carpenter / joiner required to make 94 custom timber roof dentils Looking for a carpenter to manufacture 94 decorative roof dentils. The dentils have a curved profile (see attached photos) and come in four different dimensions: 69* 300x140x100mm 7* 280x140x100mm 4* 400x140x100mm 14* 510x140x100mm These must be made from solid hardwood, primed and finished in a quality, weatherproof outdoor white paint. Delivered to site in Barnes SW13 London. Looking for best price and turnaround. Budget: £1200. Other parts will be required as well throughout the project and other sites.

Carpenter required to make 94 custom timber roof dentils Looking for a carpenter to manufacture 94 decorative roof dentils. The dentils have a curved profile (see attached photos) and come in four different dimensions: 69* 300x140x100mm 7* 280x140x100mm 4* 400x140x100mm 14* 510x140x100mm These must be made from solid timber and finished in a quality, weatherproof outdoor white paint. Delivered to site in Barnes SW13 London. Looking for best price and turnaround. Other parts will be required as well throughout the project.

Analysis of carpentry and joinery jobs around home

Staircase restoration, sanding, stripping, skirting

Skirting board was put in too high for the radiator to fit. We need the skirting board altered so that it can fit underneath the radiator

I’m looking for an experienced shopfitter / joiner to design and build a bespoke display wall and shelving system for a perfume store. The style I’m after is high-end, luxury retail, similar to the reference images attached. This is not basic shelving – it needs to look professionally finished, clean, and premium. Scope of Work • Custom-built bespoke joinery for a perfume display wall • Recessed wall niches / shelves (arched or rectangular) • Integrated warm LED strip lighting inside shelves and niches • Smooth, high-quality finish (painted or sprayed finish preferred) • Strong, secure shelving suitable for perfume bottles • Overall look should feel luxury, minimal, and boutique Style Reference Think: • Built-in product display wall • Soft ambient lighting • Clean lines and symmetry • Museum-style product presentation • Premium perfume / oud boutique aesthetic (Reference images attached for guidance) Requirements • Proven experience with bespoke joinery or retail fit-outs • Experience installing LED lighting within joinery • Ability to advise on materials, finishes, and lighting if needed • High attention to detail – finish is very important • Portfolio or previous work examples preferred

We are looking for an indoor standalone display cabinet made from MDF/pine like in the attached two diagrams. This will be propped up against the office window on the inside. On top will rest a model for display. Underneath, the compartments will be displaying 3x 3D printers (hence the large dimensions). This cabinet should be on 6x heavy duty castor wheels so can be moved around (e.g. to allow for easy vacuum-cleaning underneath). Colour of the cabinet should be white. Looking for a carpenter/joiner who can make this quickly and at a good price. This is for a new property business on a tight budget, so please don't quote silly money - but rather with the expectation that, if successful, this will be the first of many orders.

I need a wooden table assemble however some piece's need it for the assembly process were lost during moving process. I need someone a jouner whocan find a way to put it together the leg's of the table.

There are gaps in wooden tiles and below the balcony doors. Need a joiner/ handyman who knows how to fill the gaps. I will pay for the materials.

I’ve already assembled 3 IKEA wardrobes and now need a skilled carpenter or experienced handyman to help secure them all to the wall and create a custom inbuilt/fitted look for one of them. The goal is to make the wardrobes look seamlessly integrated with the room, like a built-in unit. Tasks include: -Securing the wardrobes to the wall safely and professionally -Removing skirting boards where necessary so the wardrobes can sit flush -Adding trim, filler panels, or moldings (if needed) to close any gaps between the wardrobes and the walls/ceiling Ensuring a clean, polished finish that gives the appearance of a custom built-in wardrobe You’ll need: -Experience with IKEA wardrobes (e.g. PAX system) and custom built-in installations. -Your own tools for cutting skirting boards and panels -A good eye for detail and finish -Ability to advise on trim options or any small material additions if required.

I have 3 wooden doors that need repairing, they are in a pretty bad state but I would like to be able to patch them up and repair them adding handles (I think I can supply). The reason I’m not changing the doors entirely it’s because the flat is not mine but would like the doors to be functional and safe again. Not sure if the wood can be filled and repaired and new handles placed back in position or different position on door if need be. Please let me know

A joiner to add wood trims to sides of wardrobe

Two alcoves that require shelving Skirting on one wall 4 drawers for cupboards

Hello Marian Stoica 7 years in the field. formwork carpenter