Hire a reliable appliance service in Kilburn

I need a gas cooking hob removed and replaced with a new electric hob. The difficulty is that it may also need wiring - I am not sure if there is sufficient electric wiring in the space underneath. But there is an electric oven underneath so it must be possible to sort it out.

I ordered an electrical cooker but I don’t have the cable to install it. I just need the cable and installation

I need: 1) integrated Ikea dishwasher installation, fitting of the door + removal and disposal of the old one 2)replacing of one of the Ikea method cabinet door and disposal of the old one 3) replacing/repair of one wall mounted Ikea method cabinet that covers the boiler. Currently cabinet is mounted but the bottom part is broken so I bought a new one to replace it. disposal of the old one

Replace rubber seal on Whirpool washing machine. We have started the process - taken the top and front off and removed the old seal. We also have a new rubber seal to put on. We need someone to finish the job

Melitta Barista TS SMART (F85/0-10) not recognising the water tank. The machine fails to detect the water tank during rinsing and when attempting to make coffee. I’ve already tried: ∙ Removing and reseating the tank ∙ Cleaning the sensor contacts on both the machine and tank ∙ Checking the float moves freely ∙ Power cycling ∙ Running a descale cycle None of the above resolved it, so I suspect the water tank sensor on the machine side has failed and needs replacing. Looking for an engineer experienced with bean-to-cup machines (ideally Melitta) who can diagnose and repair on site. I’m in NW6. Happy to share photos or a video of the fault beforehand.

I need to replace old integrated dishwasher with new one and removal of old dishwasher. Ikea kitchen panel to be mounten on the new dishwasher.

the small screw, which holds up the heating element, has dropped out of the roof of the oven. It needs to be replaced.

I’m looking for a technician to assess and repair my SMEG ECF01PGUK espresso machine (UK model, 1350W). Issue summary: Pump runs but cuts off after approximately 2 seconds. I need to press the espresso button 3–4 times to complete a shot. Pressure appears weak and crema is very poor. Full descaling cycle has already been carried out with no improvement. Machine heats properly and no warning lights are flashing. Based on the symptoms, it may be a pump or flow meter issue, but I would appreciate a proper inspection and quote. I’m located in NW6 (London). Please let me know: -Availability for assessment (home visit or drop-off) -Inspection fee -Estimated repair cost range (if possible)

Dishwasher won’t drain or turn on

Sofa cleaning with extraction machine

Washing machine leaking at the bottom Filter has been drained but still leaking

I need a door fitted to a integrated washing machine. The washing machine has pre-drilled holes but the hinges are slightly out of line and will need moving.

We have a CDA washing machine which won’t complete its cycle and unlock. Below is from a summary of this issue from Google: A CDA washing machine error code E2 typically indicates a drainage issue, which means the machine is taking too long to drain or is not draining at all. To resolve this, first check and clear the drain pump filter and ensure the drain hose is not kinked or blocked. If the problem persists, there may be an issue with the water supply, or a fault with a component like the door switch or heating element, depending on the specific model.

I need my washing machine removed, and the new one installed

Our dishwasher is not working and we think its because of water blockage

Water is not coming into the dishwasher when washing. When you close the door it makes a draining noise.

Oven fuse went. After flipping the fuse back on, both the oven light and the oven fan were not working. The oven still heats up but just no light or fan!

Need someone with a ladder to check 3 properties in nw6 and nw11. It is for a client of mine

Kitchen door needs screwed onto dishwasher door having come off

The sage espresso touch barista machine won’t work through its grinder head properly and won’t descale either. Need a sage expert.