Find an experienced handyman in Malvern North

Need someone to fix the wall, small peel on the plaster. and couple of holes.

Put up 6 pictures/mirrors into brick walls. Own tools required. Just need a handy person. It’s not fine art.

Hang 3 paintings and 3 large round mirrors.

I had a mirror glued on the wall that I’ve now removed. I need the following done - scrub the remaining glue as shown on the wall. -plaster the hole in the wall - paint the plastered wall

Hi I need to convert this shed door to be self closing and self latching and also need to install/relocate the door opening handle and lock at a height to be greater than 1.5m above the ground. The self-latching mechanism must not be capable of being locked in the ‘open’ position. The self-closing mechanism needs an appropriate level of tension to enable the door to self-close from all positions, including just ajar. Need to ensure that the bottom of the release device is located at a minimum height of 1500mm above ground level measured on the APPROACH SIDE There might be a few solutions and the exisiting lock can possibly remain in place as I’d still like to be able to lock the door and possibly another latch be installed at the required 1500mm plus height to prevent a child from opening the door. Or the current lock (Lockwood nightlatch style) be relocated to the required height. This shed door actually forms part of a pool barrier system and these works are required to make the barrier system compliant. The current door also rubs the frame a bit whilst closing so we may need to sand back the frame a little to avoid and friction when closing. Need to allow say $150 for the door closer hardware and maybe a new night latch lock

The wardrobe and door has a dent that requires a fix, see attached images

Two person job involving heavy manual lifting to assemble a water feature. Water feature involves three heavy pieces of concrete parts stacked on top of each other. Refer to photos. Place water pump in as well. Middle basin piece is 1.2m long and approximately 80kg plus in weight. Top piece is probably 60kg plus in weight.

A shelf nailed to the plastered wall fell off leaving holes on the wall. Repairs to the wall are needed.

I need a cat door installed on a glass door. I'm looking for quotes for the cat door and installation. The cat is about 5 kg and slightly big. If you could please send me an offer if you are genuinely interested.

Looking for someone to replace the ceiling fan in our bathroom, as well as fixing a mirror to a tiled wall.

I need someone to render the inside of an old brick chimney to the height of about 2m. I’m hoping to have it lined with ceramic tiles prior to installing a new rangehood and cooker.

Van or ute likely required. -Mount dryer/ wall bracket -Remove (and patch screen holes) 1 large heavy wall mounted mirror from premises 800m around the corner; transport to current property and mount/hang on brick wall (dryer bracket also to be removed from this location, screw holes to be patched) -Hang 3 picture frames onto brick wall -Secure 2x dressers to brick wall (child safety) - handyman to supply bolts etc for one of the dressers -Secure 1x ikea bookshelf to brick wall (child safety) - handyman to supply bolts etc - Due date: On/Before Thursday, 10th March 2022

Door is jammed to floor and requires considerable effort to open.

Require someone to hang paintings and prints at a house in Malvern. Person must be able to measure the wall areas so that the paintings/ prints are hung in the right wall positions. Walls have been recently painted. Job needs to be done 24 or 25 February.

Kitchen drawer (harn brand) slams shut instead of closing softly - Due date: Flexible

I need Vaporative cooler repair

See photo: I need the grey downpipe (top of photo) to connect with the white downpipe (bottom of photo). It's a straight line and the gap is only 1.8m (approx). Both pipes are the same size. The grey pipe previously ran into a water tank but this has since been removed.

- Demo existing BIRs (pictured) and removal of rubbish - Install new BIRs (with sliding mirror doors) *please note the ceiling cornice around existing robes, possible plaster work to make new BIRs look finished *budget includes removal of existing BIR rubbish and supply of new BIR materials

I’m looking for someone who can attach the brackets from the desk to the hutch and also anchor to the wall please.

I have a leaking wooden window. The external seal has rotted away and needs to be replaced. Please see attached photos