Find an experienced handyman in NSW

I need somebody that’s able to manufacture a promotional window sticker based off a design we already have 1.5m x 1.5m estimated 2 x front balcony sticker signs length 1.5m x 800mm high (flat mounting plate already in position and mount one roof sign sticker sign backing plate already mounted Also provide two stickers to mount to existing promotional sign placed on the street Exact dimensions can be provided on Monday please free to contact me for any other required information Note the photo with the company called lotus Thai is the old existing and we want to rebrand something to the shop called cheeva massage

Looking for a licensed electrician to complete the following work at my house: - Install 2 new ceiling fans where existing lights are currently installed - Install or replace 4-5 new ceiling lights - Install approximately 3-5 new downlights - Tidy and organise existing electrical wiring and cables Please provide: - Your electrical licence details - Your availability, preferably next week Photos can be provided, and a site inspection can be arranged if required.

Install savanah vinyl to my kitchen no need to rip off the old ones i just need them layed ontop of the ones i currently have 4 metres

Need a handyman to 1. touch up a small water run mark above the door and 2. a tiny scratch on the high white cabinet edge * Please bring white touch-up paint/roller and white touch-up wax/marker. Thanks

I’m replacing old locks/levers on 3 internal doors with new Gainsborough Matte Black Choice Harper Square Privacy Lever Sets (60mm backset, 54mm bore, 25mm edge bore — I’ll supply the handles, latches and instructions). The old hardware has already been removed. Scope: 1. Patch 2 door edges: two doors had mortice locks, leaving rectangular cavities in the door edges. These need solid timber infill blocks, glued and packed tight, planed/sanded flush — the new 25mm latch bore and faceplate screws go straight through the patched area, so it must be solid. Please bring suitable timber and adhesive. • Door 1 (bathroom): cavity approx. 100mm high x 17.5mm wide, door thickness 34.8mm • Door 2 (second bathroom): cavity approx. 57mm high x 16mm wide, door thickness 34mm • Please verify cavity depth on site — I haven’t measured it 2. Drill new holes in all 3 doors: 54mm face bore at 60mm backset + 25mm edge bore. Third door (bedroom, 34mm thick) has no cavity — drill and fit only. Note: all 3 doors have existing old spindle holes (~14–23mm) that overlap the new bore centre, so a hole saw pilot bit won’t have material to engage. You’ll need to clamp a sacrificial board over the face to guide the hole saw, or use a lock installation jig. The old holes fall entirely within the new 54mm bore and will be drilled away. 3. Install the 3 lever sets including latches and strike plates, chiselling strike plate recesses in the jambs as needed, and confirm doors latch and the privacy function works. Doors can stay on their hinges. Painting/finishing not required. You’ll need a 54mm hole saw, 25mm spade/auger bit and chisels.

What’s involved: •Fit the F&P stacking kit correctly between the two units •Level the washer underneath before stacking •Secure the dryer and confirm no movement or vibration •Plumb the condensate drain to the laundry tub/standpipe rather than leaving it on the tank. •Test run Requirements: •Two people. Heat pump dryers are heavy and it’s a lift to waist height onto the washer •Prior appliance installation experience specifically, not general handyman work. Please mention similar jobs you’ve done

Fix the wooden frame on the front door Clean the awning in the courtyard Replace a set of coat hooks Replace some of the lights in the bathroom Make sure the smoke detectors are working properly

Existing clothesline needs to be restrung. Cord provided. Experience required

We need blinds installed and a door knob installed.

Just need a bit of trim replaced (and some bog where the underside is also experiencing rot) Essentially supply and replace the three lengths of timber as per photos I will repaint behind you

remove the existing kitchen sink. Modify/open the internal cupboard carcass where required to provide adequate access to the mixer retaining hardware. Supply and install a new kitchen sink mixer. Reinstall and reseal the existing sink. Reconnect all associated plumbing services. Fully commission and test the installation to ensure correct operation and that all connections are leak-free.

Need to install door knobs 30+

Gyprock and plaster 4 holes in wall ceilings , have some of the cuts not all. Shop located at Canterbury station. Can start from 9.30 am on Thursday 20th, need to complete on same day. Professional job :)

I have designed and gotten an ACM panel printed for a client i need it installed. Please see the attached image for reference. I'm hoping the sign comes in tomorrow i will drop it off at the location, and on Friday or Saturday i would like it installed.

Install 8 x 900mm x 1200mm mirrors directly to painted brick walls in garage gym. * Mirrors to be installed across 4 separate locations * 2 mirrors per location, installed side-by-side * Securely fix mirrors directly to brickwork * Ensure mirrors are level, evenly aligned and safely mounted * All fixings/adhesive suitable for brickwork and mirrors to be supplied

I’m looking for a handyman to drill and securely hang two paintings in my living room. Each painting weighs approximately 5 kg. The walls are painted, slightly textured and solid when knocked on, so they appear to be a rendered/masonry type wall rather than a hollow wall. One of the drilling positions is already marked with an X exactly where I want the painting hung. Looking for someone experienced with drilling into solid walls who can supply the appropriate fixings and securely hang both paintings.

Need someone to fix the door closer on our office door. It might be able to be re-fixed to the door, alternatively will need someone to supply and replace. Please let me know in your quote whether you think it will need to be supplied or whether the existing one can just be re-attached I need it done at 12pm today and completed before 1pm Job is in five dock Must have all materials needed for task Thank you

the pipe under kitchen sink is leaking, please see attached images

Paint chicken coop. App paint and tools provided. Needs to be done urgently.

Looking for an experienced handyman/render repairer to repair the damaged section of rendered wall shown in the photo and repaint the area once repaired. The task will include: * Removing any loose or damaged render/paint * Repairing and patching the damaged render properly * Sanding/preparing the surface for a smooth finish * Painting the repaired section to blend in with the existing wall We already have the matching paint. Tasker will need to supply all other materials required for the repair, as well as their own tools and equipment. Please only apply if you have experience repairing rendered walls and painting and can achieve a neat, professional finish. Please include labour and any required repair materials in your offer.