Find trusted local electricians in Marrickville

I have existing solar panels with brackets from an existing solar system. I have removed them due to a second floor addition but now need them reinstalled. There are 17panels that make up a 6.6kwh system. Everything else is in place such as the inverter and wiring. I have included some photos of the old design and the new structure now for reference. Currently I have scaffolding present that will make the job easier.

I require a technician who can repair the electrical system of s dog dryer. It looks that a regulator is faulty and needs to be replaced the piece is in the pictures. Please let me know your rate and your availability

My smoke alarm has fallen off the wall/ceiling and needs to be properly reattached. It may just need to be screwed back in or have the mounting bracket fixed/replaced.

I will provide the switches.

We need an electrician to hook up a circuit in the switchboard. 2.5mm 20amp cable has already been pre run to the switchboard.

I need to get two ceiling fans installed. Already have connection, the room light will be replaced by the fan. The link to the fan I need to get installed https://www.bunnings.com.au/arlec-132cm-miami-4-blade-hugger-fan-with-cct-light-and-remote_p0850504

Install a power point into my bedroom wall. Please send your best offer

Need someone to replace our old light with a new ceiling fan (with light) Please provide quote. Fan model is https://amzn.asia/d/5y1F9d4 Thanks!

My table lamp has stopped working. I believe it is the wiring, as it used to work when the cord was at a certain angle. Flexible on time and happy to drop it off (if close to Marrickville) to minimise cost. Thanks!

I have a Daikan Split System air conditioner needed to be installed on a balcony 3 floors up in an apartment.

We ordered a Rinnai Electric Heat Pump and they delivered it to the front bedroom. We now need it moved out to the back of the house via a side lane, approx 20m house front to back. Please note it is very heavy, 120kg. We have a trolley and a strap to assist. No installation needed, just moving.

Need a licensed electrician to remove a single power socket in a drywall / gyprock wall and relocate it about 300mm below. This is due to a benchtop being installed in the laundry. Also need help to make sure the new socket is cut into the wall correctly, and finished with a high level of detail. This is a quick job, less than 30 minutes. Patching the hole etc from the original socket is not required.

remove old celing light and replace with new

I have 2 wall ovens and a cooktop that need hookups. I beleive the one oven is already partially connected. The ovens also need to be secured to the joinery.

Anchor light and light on Bimini cover with the wiring running through Bimini cover frame to be re wired. Please send me offers.

Need a quote for the AC unit and installation, potentially some additional electrical work as it's an older house.

Ice vending machine requires electric connection to an electric socket. See the photos attached of the electric connection in machine.

Remove ceramic chandelier assembly that has a lighting wire through it and replace with basic lighting fixture.

Needing two small wall lamplights capped off as the wall is being wallpapered

- Rough-in electrician for lights and switches - Job - Marrickville - Has to be done today - Must have a license