Find trusted local electricians in Inner South Melbourne

Hi, I have 2 LED lights fitted under a kitchen cabinet and another ceiling one that have stopped working. I need a licensed electrician to: • Trace the existing low-voltage cable from the cabinet light back to its power source (suspected to be hardwired to a power outlet or junction box) • Locate the LED driver/transformer which is hidden and not accessible from the cabinet face • Test the circuit to confirm whether the driver has failed or if there is a wiring fault • Replace the LED driver with a compatible unit • Restore and test the light to full working condition • Patch or tidy any access points opened during the job • Replace a ceiling downlight LED driver (ACTEC Series III MINI60, 230–240V → 12V AC electronic transformer rated 20–60W with dimmer compatibility) What I have: • Existing LED strip light and wiring in place • Access to the cabinet from below What I need you to bring: • Tools to trace and test the circuit 3 replacement LED driver (or advise specs beforehand so I can source) Job type: Small electrical job – likely 1–2 hours Please quote based on your hourly rate + any parts needed.

Licensed electricians only. I have a downlight in my powder room that needs replacing. It's an older transformer style that we wish to replace with a modern plug style for future DIY. The model of the current system is in the photos attached.

Ac will run for a bit then power will cut out, have to turn it back on at main power box

Need electric switches (6), one oven/stove switch, power point (2) and front entrance light replaced. Photos attached.

Looking for a licensed electrician to install a Braemar TQRD321 ducted heating system in a three-bedroom house located in Bentleigh East. Scope of work: Installation of the unit (roof space accessible) Electrical connections and setup Ensure system is compliant and fully operational Optional: If you can supply the unit and all required components, please provide a package price (supply + install) Open to Bonair or equivalent systems if you can recommend a suitable alternative Please include in your offer: - License details - Experience with ducted heating systems (Braemar/Bonair or similar) - Availability and estimated timeframe

The wire next to the post is cut I replace the rusty post to the post with base plate.when I bolt it down the wire under the post is cut I need some one to fix it as soon as possible

We have one blown light bulb that needs fixing and replacing (part of bulb still in there), and another downlight that needs the same (it wasn’t blown but unable to change ourselves so more going on in there!)

Licensed Electrician Needed – Install 12 Lights / Wall Sconces Looking for a licensed electrician to: • Install 12 light fittings total • 10 lights require new wiring • 1 existing light is simple replacement • Remove 1 existing light fitting • 5 lights already have switches • 7 lights require new switches installed • Fit-off, test and provide compliance certificate House details: • Single storey weatherboard house • Plasterboard walls/ceilings • Roof cavity access available • Existing lighting/power nearby to all locations • Customer supplying all light fittings Light fittings include: • Wall sconces • Pendant lights • Small decorative chandelier/light fitting Looking for: • Neat installation • Minimal wall/plaster damage where possible • Licensed and insured electrician only Please include in quote: • Labour • Wiring/materials • Switches • Whether plaster patching is included/excluded • Estimated duration • Electrical licence details

Bathroom 2 x heater globe replace Hall 2 x globe replace 12’ ceiling Outdoor 1 x censor globe replace 14’

Power outlet needs to be refined to wall. See picture. Also fan/light currently operates on one switch, needs to be split out to two to operate independently.

Put in 4 double power points

Looking for a practical handyman to install a lightweight side gate between two units in Hughesdale. The setup: -Gate and frame are already purchased and on site - One side has an existing panel/post to attach to - The other side needs a support — looking at a no-dig/concrete-free post from Bunnings (e.g. ground spike anchor) Measurements: Total fence to path width: 133cm Gate width: 78cm Side panel: 31cm Path width: 84cm Gate height: 120cm Back panel height: 124.5cm Front panel height: 124.5cm (approx.) What we need: Someone to assess, source a suitable ground spike or stake from Bunnings (nearby), and install the gate so it opens and closes securely. No concreting, no panels, no major earthworks. Goal: Keep a dog contained. Function over form — doesn’t need to look perfect. Budget is $200 all-inclusive (your time + any hardware). Happy to discuss if you have a smart, cost-effective approach. This is a job for a confident handyman, not a fencing contractor. If you’ve hung a gate before, this is right up your alley.

Hi, I’m looking for someone to install some lights in my bedroom. It comes with a remote so i would need that to work and to be connected to the switch as well. You will need to come with your own tools since I don’t have any. The last photo is the current light I have.

Hi, I recently had a new bathroom window exhaust fan installed (Maxair 190mm Window Exhaust Fan). The old exhaust fan has been removed from the window but is still hardwired. I’m looking for a licensed electrician to safely disconnect the existing wiring and connect it to the new fan.

I need 4 light switches to be fixed as they are a bit flaky. It doesn’t switch on immediately and requires some fiddling around with the switch.

Looking for an electrician who can meet at my property around 5 one afternoon this week to disconnect a push switch and terminate it and disconnect a light fitting, and the reconnect after I have fed it through a new piece of weatherboard.

Looking to swap out my old NC-6 controller for newer one, house has 2 zones ducted gas. Will attach photos for reference.

Electrician required for the following: Inspect and repair two extraction fans (bathroom and kitchen – currently not working) Supply and install two double power points (one in lounge, one in bedroom – brick/concrete walls) Looking for someone experienced who can assess and complete the work efficiently. Happy to cover cost of parts and discuss any additional work required. Flexible with timing. Photos of fans attached. Licensed electrician preferred. Budget: $450

Need one wall light and one pendant removed and any live wires sorted so we can pull down fitting room walls safely.

Install power point on wall by dining table - available point behind microwave or around corner in euro laundry. Flat roof/ lack of access I think. May need two more after first installed and complexity confirmed