Find trusted local electricians in Murrumbeena

Looking for someone to build a box cover for my electrical meter, photo attached. The box need to be able to open so you can access the meter. I’m Okay if the box goes the the ceiling panel (photo) which would make it roughly 60x45cms or just cover the 50x45cm surround of the meter.

Hello I have a few jobs to be carried out 1. Installing lights in our verandah 2. Installing a fan in our verandah 3. Removing and installing wall lights 4. Fixing the existing garden lights which are not working I am not sure the cost of material and labor for this job. Happy to discuss post site visit. Photo os verandah where we need to install some lights, Photo of pillar lights to be replaced Photo of ground light not working

My downlight is flashing. The diver should be replaced.

I currently have 5 pendent lights in my house and need them replaced with new pendant lights I have purchased

x2 straight forward wall GPO installations. x1 to be installed inside a fireplace recess. Wiring is there but needs to be moved further back inside the recess. Photo. Please provide the GPOs.

I’m looking for a licensed electrician to replace 4 existing ceiling light fittings in my house. Scope of work: Remove 4 existing ceiling light fittings Install 4 new batten-fix light fittings (supplied by me) Existing wiring and ceiling connection points are already in place Ensure all fittings are installed safely and tested upon completion Must be a licensed electrician Please provide your license details and any relevant experience Thank you!

I bought an old floor lamp that needs a replacement/rewiring, including a new lampholder, switch etc

I need a licensed electrician to inspect and repair two faulty power points in my Airbnb unit. One double power point stopped working after the kettle caused it to smoke, and only one socket still works. Another double power point nearby also has one socket that’s not functioning. I need someone to diagnose and fix both power points. Preferably this week.

I need someone to change standard bedroom ceiling light to a pendant fitting (I believe that’s what it’s called???!!) and install hanging lights in Murrumbeena in ground floor unit in 2 storey building-I think the roof cement not plaster.

Replace 4 MR16 downlight globes plus one (standard globe in kitchen) (easy job) Description: Looking for someone to replace 4 existing MR16 halogen globes with LED MR16 globe and one standard globe in kitchen. Ceiling is slightly higher than standard. Globes provided

I need to have a double power point (no switches needed) installed on the floor by a licensed electrician. (First pic) There is one power outlet (mounted on the wall) about 3.5m away. There is a subfloor. Will need to have everything (floor and wall) fixed and patched upon completion, so everything looks seamless. Also snother task is checking the plug (second picture) and see if it is working Thank you.

I have a newly built house and my garage already has existing power points. I just need three additional power points installed in the garage. This should be a simple job, as no rewiring or major work is required — just adding extra outlets from the existing power source. Please provide: • Your quote / offer • Whether materials are included • Estimated time required • Your earliest availability Photos can be provided if needed. Looking for certified electrician reliable with experience. Thank you!

Electrical Work Required Summary: We require a licensed electrician to address several items identified in a recent inspection to ensure compliance and the safety. Scope of Work • Upgrade the main switchboard so that all circuits are protected by RCD/RCBO. • Rectify all concerns with the switchboard, including: o Bare earth wiring (requires insulation with heat shrink) o Exposed terminals (must be insulated to prevent accidental contact) o Unsafe installation of a circuit breaker (currently loose and not mounted on a DIN rail) • Issue a Certificate of Electrical Safety upon completion. • Replace the existing single GPO (power point) above the fridge with a double GPO. • Repair a faulty GPO in the kitchen (not working, but not an immediate safety concern). Additional Details • All smoke alarms are compliant and do not require attention. • The property is a residential apartment, built before August 1997. • Work must comply with the Residential Tenancies Regulations 2021 and AS/NZS 3019 standards.

Smoke Alarm, Electrical & Gas compliance checks for rental property - https://www.realestate.com.au/property/unit-3-20-gerald-st-murrumbeena-vic-3163/

Replace LED downlight, slow to come on. Smoke alarm, fix or replace.

I will purchase a Ventair Airbus EC200 (with LED light) exhaust fan that needs to be installed in place of an existing light fixture mounted on a concrete ceiling (~2.2m high) in my ground floor apartment. The fan must be securely mounted, and connected to the existing light switch wiring (unless you advise otherwise). Please note: • The vent outlet to the outside is not yet connected — I will handle this separately. • If you have experience building Gyprock enclosures, please mention this as I may consider enclosing the fan. • There is an apartment above. I have a concrete ceiling and there is no ceiling void as far as I can tell. • Reuse of existing wiring is expected. • Proof of electrician licensing and a certificate of electrical safety are required. • Flexible timing for job completion.

Install and wire new bathroom fan/light. New fan/light has been purchased and is replacing an old one.

So my cars front screen is showing lot of of errors in car , there is no problem with the engine but last time I diagnosed they said there is a problem in body control module , where my indicators turn off automatically, infotainment system get off and i get many errors in car, last mechanic tried to change codes of the car but still same problem , so there is a electrical problem such as body control module.

Zip Hydro tap failed hot pump need replacing.

Two separate issues with some wiring in the house. 1. I have a two way switch that an electrician on Airtasker completed, and never came back to fix. One of the switches you turn on and off, and then the second switch doesn’t work at all on the light. 2. Ceiling fan isolation switch doesn’t turn off the light. (Need to use the remote all the time to turn on the light). Hoping someone with the right skills can attend to them.