Find trusted local electricians in Inner South Melbourne

I am converting my backyard garage into a studio and need a fully licensed and insured Electrician to complete the electrical rough-in and fit-off. Scope of work: 1) Main Cable Connection & Testing: There is an existing power cable running from the main house to the garage inside a conduit (on concrete driveway). The middle section is intact, but both ends are currently cut and bare. You will need to test the cable for insulation resistance/continuity. If safe, connect it back to the main switchboard with appropriate RCBO protection. (If the cable fails test, we can discuss a variation to pull a new cable through the existing conduit). 2) Lighting: Replace 4 existing light fittings in the garage. (I will supply the new light fittings/fixtures).3) Power Points: Supply and install 3 new double GPOs (double power points) inside the garage studio. 4) The garage walls are bricks, the wiring can be placed in a conduit and attached to the ceiling or the wall. Please provide a fixed quote including all materials (except the 4 light fittings) and labor. COES must be provided.

I need two US made lamps re-wired to plug into Australian outlets safely

I am looking to install 4 downlights and remove one oyster for each room for 3 rooms, single story

Hi, I need a licensed electrician for a few jobs at my home. The work required: 1. Outdoor power point for inflatable spa * I have an existing outdoor power outlet near where I’ll be placing an inflatable hot tub. * The outlet works, but it does not appear to be weatherproof, so I don’t want to use it as-is. * I need you to inspect the existing socket and wiring. * Confirm the circuit is safe and suitable for an inflatable spa/hot tub. * Confirm proper RCD/safety switch protection. * install a compliant weatherproof outdoor GPO suitable for direct plug-in use with the spa. 2. Power point inside wardrobe * Install a new power point inside a wardrobe. 3. Kitchen wall sconce and dimmer switch * Install a wall sconce/light fitting in the kitchen. * Install a new compatible dimmer switch for it. Important: * I only want a licensed electrician. * Please only respond if you can provide the required Certificate of Electrical Safety after completing the work. Please submit offers

Need a Power Point behind the TV and an aerial port and connection to roof aerial

I have 2 older ceiling lights fitting with a decorative ceiling rose (see photo attached). The fitting appears to be loose around the ceiling mount and there is a visible gap around the canopy. I would like a licensed electrician to repair the fitting.

I need for light fittings changed to down lights

Ceiling light fitting damaged by impact from basketball. Batten holder loose from ceiling. Need to secure or replace fitting.

Task: Convert 12 Existing Downlight Cutouts from 70mm to 90mm and Install New Plug-In LED Downlights Looking for an experienced handyman with downlight installation experience. Scope of work: • Enlarge 12 existing ceiling downlight cutouts from approximately 70mm to 90mm. • Install supplied 90mm LED plug-in downlights. • Connect lights to existing plug bases. • Ensure all lights are fitted neatly and sit flush with the ceiling. • Clean up any plaster dust/debris afterwards. Materials: • I will supply the new 90mm LED downlights. I’ve got new ones here. • Please bring appropriate tools, including a 90mm hole saw or suitable cutting tools, a ladder, and cleaning equipment. Property: • Apartment in Sandringham, Melbourne. • Existing downlights are already installed and working. • Access is straightforward from inside the apartment. When applying, please include: • Relevant experience with downlight installations. • Confirmation you have the required tools. • Your estimated time should only take between 30-60 seconds each hole Photos of the existing lights and new lights can be provided.

I’m putting a new TV on a wall - there was previously an outlet on the wall that was removed. I need the outlet put back - wires are still there. There is already a cavity in the wall so I’m hoping it will be easy for you! I’m flexible with where the outlet will go. Need it on Tuesday June 2nd or Wednesday June 3rd (anytime after 9:30am)

Looking for a licensed electrician to supply and install a 4-point power outlet (4 GPO) in place of an existing single power point. Important: The existing power point is installed within a skirting board that is 100mm (10cm) high, so the replacement power point must be 100mm high or less to ensure it fits neatly within the skirting board and does not protrude above it. Scope of works: * Supply a white 4-GPO power point. * Remove existing single power point. * Install new 4-GPO power point. * Test all outlets and ensure everything is working correctly. * Dispose of old fitting if required. Notes: * No wall repairs, patching, plastering or painting will be required. * Photos of the existing outlet and the style of outlet I’m looking for are attached. * Looking for a neat, straightforward installation with minimal fuss. I’ve listed this job at $120, so please keep quotes realistic and close to budget where possible. If there are any genuine reasons the cost would be significantly higher, please explain what additional work would be required. Location: Kooyong Timing: flexible

In the kitchen downstairs I have 3 lights that arent working. Id like to take 2 lights from upstairs and install 1 new one to replace these 3. Upstairs, I'd like to install 2 dimmable lights in to the ones that have been taken for the kitchen, and will need the switch to be replaced to control dimming for those 2 lights.

Have 4 down lights that I want replaced. I have the down lights, but just need someone with a really high ladder! The lights are app 3.7m from the floor.

Need an electrician to install 6 outdoor wall lights on weatherboard walls. The lights will go either side of my windows. There is only 1 spot with light fittings, others don't have power right now, so you'll need to run new wiring to 5 points and wire in each light.

I have x2 ceiling downlight's which need replacing. I do not have replacement globes as they are not easily sourced. They are not LED -images for context. *Budget is negotiable

Need an electrician to take a look at some kitchen down lights. They have just been replace however still flickering. It's only 1down light out of the 4 in the kitchen. Have a video however can't post videos in the post

Licensed electricians only. I have a downlight in my powder room that needs replacing. It's an older transformer style that we wish to replace with a modern plug style for future DIY. The model of the current system is in the photos attached.

Bathroom 2 x heater globe replace Hall 2 x globe replace 12’ ceiling Outdoor 1 x censor globe replace 14’

Power outlet needs to be refined to wall. See picture. Also fan/light currently operates on one switch, needs to be split out to two to operate independently.

Put in 4 double power points