Find a local software expert near you

Installation of a conduit for external NBN cable to be pulled through internally into the house. Also for a single electrical power point to be converted to a double one. Licenced electrician required. Will require entry into roof through manhole. Photos show 1) current external area where NBN cable is; 2) outdoor area where external NBN cable is located to the left, and approximate location of the internal exit point; and 3) internal wall area where conduit needs to run to.

Install vidga track on 2 windows https://www.ikea.com/au/en/p/vidga-single-track-rail-included-ceiling-fittings-white-00492917/

I bought a gaming PC recently and I’ve assembled all the parts I just need the wiring all done due to not knowing where they go into on my motherboard. The motherboard is a B560E.

I am looking to have a wired network point installed in a room that currently lacks connectivity. Since internal cable routing isn't feasible, I’d like to run an external-grade Ethernet cable along the outside of the house. The project involves: - Drilling two entry/exit points through the external brickwork. - Routing approximately 5–10m of cable via external conduit or secure masonry clips. - Terminating the cable into a professional Ethernet wall socket (RJ45) at the destination. - Testing the connection to ensure full gigabit speeds. - I do not currently have the socket or the specific cable, so please let me know if you can supply these - all on same floor

I have a shop environment which has internal plaster walls and a plaster ceiling. I have internet which is installed but needs to be moved to a location that is more out of the way. So I need to have a network cable run approximately 30 meters

Installation of (I have all hardware here) -Wireless access points -Network switch, modem, router, parch panel -Server and server rack -Several CAT6 cable terminations -Set up TVs, PC access points, access control and security cameras -Get all up and running In a large family home in Maroubra. I have FTP NBN installed. Difficult job to price so ideally hourly rates and take as long as you need.

2 network cables to support 2000/200 or slightly more fibre speeds. Router is in kitchen and I need 2 access points installed (have the ap's). First location will be a general room/area and the second will be a bedroom. Single story home, tile roof, cable to run in walls and nothing external. > Rough estimate cable lengths required: > Cable 1 - 10-20m > Cable 2 - 30m cable

We’re looking for an experienced cable installer to run data cables throughout a 2-storey brick and tile house. The Job: - Supply and install approximately 7–8 data cables (Cat6 preferred) across both floors, including routing cables through brick walls, floors, and ceilings as needed. - Terminating and testing all connections to ensure full functionality. What We’re Looking For: ∙ Proven experience in residential data/network cabling, including brick and tile construction ∙ Ability to work cleanly and make good any penetrations through brick walls/ceilings ∙ Own tools and equipment, including masonry drill bits ∙ Reliable, tidy, and communicates well Details: ∙ 2-storey brick and tile residential property ∙ 7–8 cable runs in total

Custom Software Setup on TP-Link M7350 Portable 4G Hotspot Description: I have a TP-Link M7350 portable 4G mobile Wi-Fi hotspot and I’m looking for someone to install and fully configure custom open-source software on it. A clear, detailed, step-by-step guide is available specifically for this exact model, so the process is well-documented and straightforward. The job involves flashing the firmware, setting up the software, getting the web interface working, enabling auto-start on boot, and doing basic testing. This is a fun, one-off tech project that should be quick for the right person. What I need: Complete installation following the provided guide Clean working setup (web interface + auto-start) Basic verification that everything runs reliably You should have: Experience with router firmware installs, OpenWRT, custom software on embedded devices, or similar DIY router/hotspot projects (OpenWRT experience is a big plus but not mandatory if you’re comfortable learning from a guide) Comfortable working with command line Careful with hardware (no soldering or permanent modifications required) I’m based in Brisbane and happy to arrange easy local drop-off/pick-up or cover shipping costs. Reply with: A quick note on your relevant experience (router mods, firmware flashing, etc.) Your estimated cost and how soon you can do it Would love to get this sorted – looking forward to your proposals!

I need someone to come to my home in Brisbane to set up a brand new Mac Mini M4 from scratch. The Mac Mini is plugged in and ready to go but I don't have a USB-C to USB-A adapter to connect a keyboard and mouse (the M4 has no USB-A ports). You will need to bring your own USB-C keyboard and mouse, or a USB-C hub/adapter. Here is exactly what needs to be done: Complete the initial Mac Mini setup wizard (language, region, wifi, computer name, password) Download and install RustDesk remote access software from github.com/rustdesk/rustdesk/releases/tag/1.4.6 - specifically the aarch64.dmg version for M4 Configure RustDesk with a password and provide me with the 9-digit ID and password so my developer can connect remotely going forward The Mac Mini needs to be named "BossMoney-Server" during setup Please only apply if you are comfortable with Mac setup and have your own equipment. Brisbane southside preferred.

Job Description I’m looking for an experienced installer (network cabling / electrician) to run one 1Gb CAT6A Ethernet cable through my house. This is a single continuous run (~15 metres) from the NBN entry point (back room) to the garage, following an internal wall/ceiling path. Described by the attached picture 📍 Scope of Work Run 1 x CAT6A cable (approx. 15m total) Route: From Back Room (NBN entry) Through ceiling/wall cavity (preferred – concealed) Down to Garage location Install: Wall plates (RJ45) at both ends OR neat direct termination (discuss) Secure, tidy, and professional finish (no visible messy cabling) Test connection to ensure full functionality 🏠 Property Notes Single-storey house Roof access available (manhole shown in layout) Internal run preferred (ceiling cavity) Easy access from side of house if needed Photos and layout provided for clarity 📸 What I’ve Provided Floor plan with cable path (5m → 10m → 15m route) Photos of: NBN entry area Internal hallway Living room router location Garage destination Roof access location ✅ Requirements Experience with structured cabling / Ethernet installs Own tools Ability to work in ceiling space Clean, damage-free install Preferably supply cable + fittings (or specify if I should supply) 💬 When You Quote, Please Include: Total price (labour + materials or labour only) Whether you’ll supply CAT6A cable + wall plates Estimated time to complete Any assumptions or requirements ⭐ Goal A clean, professional wired connection from NBN to garage to improve network performance (replacing poor WiFi/mesh backhaul).

Returned to site with offsider and reinstalled two panels. Configured WiFi network connection on panels as we couldn't identify location of wired internet in bulkhead. Liaised with Brett to ensure content was displayed.

Looking for a licensed data cabler or electrician to install/relocate an NBN socket at my property in Elizabeth Vale

I have a mid 2011 desktop mac which I need to update the software for, in order to install other apps. I’m unable to as it’s unsupported/ too old. If anyone knows how!

Need to run a cable from my building NBN to my apartment. Currently does not have NBN wired through the unit. There is NBN cable right at the entry of the unit.

4 CCTV camera installation WIRELESS - camera will be provided.. EUFY S3 PRO CAM - WIRELESS CAMERA

Assistance required in setting up a new internet router

Cannot figure out how to solve PS4 not opening due to storage I have a USB device need someone to fix

I need an IT expert who can set up my UniFi Ubiquiti AC Pro 360 WAP unit in my home. The installation has been done, I just need the software installation and connection completed.

Install SSD, Reconfigure Windows PageFile, Optimize for SketchUp & Run Integration Tests. - View all the details of this offer: https://www.airtasker.com/offers/01K9EV04MYKXP71D9205JKS2DB