Find experienced local tradies in Maroubra Junction

I need 4 x 10w wall mounted lights fitted to a cavity wall , power is located in the wall also need a surface mounted gpo put outside and the power would by fed from the bulkhead above ceiling , I will supply all the fixtures and fittings needed as well as conduit for the surface mounted power outlet

A custom pre measured curtain rail from “5 minute blinds” needs to be fitted to the ceiling. It’s one 6m rail and requires 14 brackets to fix it in place. The ceiling is plasterboard and in some areas it seems hollow and others a thin metal layer. The measurements for the brackets have been marked we just need the rail to be hung using Super Wall Mate which we have purchased or another proposed method.

Need assistance mounting TV onto plasterboard wall tonight. TV is 55 inch and we have already wall mount ready. Tv + wall mount weight is approx 25kg.

The ceiling was stained due to upstairs leak. The plumber knocked off the stained part, and now needs to fix this hole. Offers are welcomed.

10mm aqua check ceilings to be installed I have sheets onsite all other materials by installer 2470 x 1510 2330 x 1490

Hello, I am hoping to replace the attached power point square , right outlet and right switch

put in powerpoint that can power lots of plugs , possibly a commercial oven and like 10 power plugs

I have three plates on the wall. Need the power point replaced by the licensed electrician. Need TV antenna wall plug replaced. Need phone line replaced and need speaker wall panel for speaker wires with existing three panels/plates. You will need to supply wall plates

Old kitchen has been removed. Walls need plastering. - Due date: Needs to be done on Thursday, 25 January 2024

Render the external of a house - Due date: Flexible

Remove and replace dry wall panels from a sloping ceiling and around a window. Highest point of ceiling is approx 4 metres high and lowest is 2.7. Width of work is 1.7 for both wall and ceiling. The length of the room where the ceiling slopes down is 3.8. The wall around the window is also sloped and is 2.7 high. It’s a box around the window that would need to be done as well. I would need all items removed and the walls prepped to paint. Also materials would need to be sourced. - Due date: Before Saturday, 16 December 2023

Need gyprocking and painting for wall - Due date: Needs to be done on Saturday, 9 December 2023

Need a few small plaster jobs done in house/room. - Due date: Flexible

a few small rendering jobs needed on outside of house. One wall 3.9m wide x 2m high. Other areas are just some patching needed. Would need someone to come and look at job and give quote. Qualified render required - Due date: Flexible

55 inch TV to be mounted to a gyprock wall. Bracket supplied. - Due date: Needs to be done on Saturday, 23 Sept 2023

Remove wall made of timber and plasterboard from garage and dispose of materials and remove sound proofing from internal garage (timber) door. The wall is at the front of the garage it was used for sound proofing and is double thickness. 2 layers of timber frame, insulation and plasterboard. The garage door is on the other side of the wall. No wiring - Due date: Needs to be done on Monday, August 21, 2023

Need timber frame built on top of existing ceiling for gyprock - Due date: Needs to be done on Wednesday, 5 July 2023

We have already bought the cornice. We need an experienced plasterer to install over kitchen. Kitchen size is 3.7 x 2.8 - Due date: Flexible

I run a physiotherapy practice and I need 5x double sockets put on masonry and plasterboard walls in the practice with conduit covering cabling off current circuit 1x socket moved lower by 50cm Must have electricians licence and be able invoice - Due date: Before Saturday, 13 May 2023

There is a large whole in a plasterboard wall that needs fixing. The doorframe is coming away from the door meaning it no longer closes - it needs rehanging and the frame fixing. - Due date: Flexible