Find a professional fitness equipment installer near you

We had recently moved and would like a gym set put back together. It’s only partially taken apart. We have all the parts and manual in the room and nothing missing. It’s a rebel brand set and not commercial grade. We have a photo of before it was taken apart and a photo of the parts

New Vulcan adjustable gym Bench to be assembled

I need an experienced handyman to mount 3 pieces of home gym equipment in my garage. I have already purchased all the heavy-duty mounting hardware (Ramset M10 AnkaScrews and M12 washers), so you will just need to provide the tools and labor. The Scope of Work: 1x Pull-Up Bar: Mount onto a solid red brick wall (requires 12 holes). 1x Heavy Bag Bracket: Mount onto the same solid red brick wall (requires 6 holes). Note: The pre-drilled holes on this steel bracket are slightly too small for the M10 screws, so they will need to be quickly widened with a metal drill bit before mounting. 1x Half Power Rack: Bolt into the concrete garage floor straight through 15mm rubber gym mats (requires 4 to 8 holes depending on the rack base). Tools You Must Bring: SDS Rotary Hammer Drill (Standard battery drills will not cut it for this). 10mm Masonry Drill Bit (To pilot hole the brick and concrete for the M10 AnkaScrews). Standard drill with a 12mm or 13mm HSS metal drill bit (Just to widen the 6 holes on the heavy bag bracket). Impact driver or socket set (To ratchet the AnkaScrews tight).

Assembly of Cortex GS7 multi-national hone gym in a room that will become a home gym

Help Moving & Laying gym mats – ONLY THURSDAY between 1pm - 5pm We need help with carrying gym mats and help laying them: * Unloading 36 floor tiles (1m x 1m) * Carrying tiles up approximately 15 stairs * Helping lay the tiles in our home gym with my husband - We have done this before, but have to replace them * Moving gym equipment back into place Looking for someone reliable and physically fit.

I have a large functional machine, spin bike and bench to be put together, they are all flat packed.

Installation of a gym station. Keen to get installed asap! https://www.getrxd.com/rx3-3000-smith-machine-rack.html?srsltid=AfmBOop97_XivZPAjdXd5DlTdymAIejv_AY7bhHHPyO0u3lb1y4wgtC7

I need an experienced technician to inspect a pin-loaded leg extension machine. The weight stack has become unbalanced has moved off the rubber feet at the base. The stack needs to be correctly repositioned, and the cable needs to be replaced. The advertised task is for one hour of inspection and repair work. During the appointment, I would like the technician to: - inspect the machine and identify the cause of the problem complete as much of the repair as reasonably possible - identify any replacement parts required - provide an estimate of the additional hours required to complete the work Thank you.

Assemble 5 plate loaded machines, then position them in place within my personal gym. Experience assembling gym equipment is necessary. There are no instructions available. Hammer strength - Iso-lateral row - Hack squat - Iso-lateral chest press - Iso-lateral shoulder press Rogers - Hip press

Lay 1m x 1m rubber gym mats across a 7m x 7m garage gym. Scope includes: * Lay and align rubber mats * Measure and cut mats neatly around brick piers and fixed cabinets, including wedge/irregular sections * Move gym equipment as required, with help from owner * Ensure a neat, tight finish with minimal gaps Mats supplied. Must have suitable tools for cutting 15mm thick rubber mats.

Gym installation Handful of pin and plate loaded machines to build - Project manager will be on site to assist as well Hourly rate applied

I bought a new home gym and need it to be built

Rebooking task between Navjot and Nitish

Assembly of a Home Gym set

Neee my new home gym assembled. It's a Ritkeep Anvil S1. New in boxes ready to be assembled in my garage. Hillside location, needs to be completed on Sunday 9th August

I need an experienced gym equipment installer to assemble the following in my basement home gym: Verve Tori Functional Trainer Rack (main job). Dual weight stack functional trainer with power rack. Reference: https://www.vervefitness.com.au/products/tori-functional-trainer-power-rack Verve Smith Machine attachment for the rack Verve No Gap Adjustable Bench plus leg attachment Cable attachments fitted and cables tested (lat bar, low row foot plate, lat pulldown seat, handles) 2-tier Olympic plate rack and 2-tier dumbbell rack (small flat-pack jobs, boxes on site now) Site details: Basement location, ground-level access. The the boxes will be located in the room, so there won't be a need to move them. Ceiling height approx 2.35m, confirmed compatible with the rack Concrete floor with rubber tiles. The Tori must be anchored with the supplied dynabolts, so you'll need a hammer drill and masonry bits All boxes on site, unopened Requirements (non-negotiable): You must have assembled a Verve Tori Functional Trainer or an equivalent cable/weight stack functional trainer before. Attach a photo of a previous install with your offer. Offers without a photo will not be considered Own tools including hammer drill Cables routed correctly, weight stacks tested through full range, all bolts torqued, rack anchored and checked for level before sign-off Packaging broken down and stacked for removal Flexible on date. Verve equipment arrives Friday 07/08

Hi need a handy man to construct my home gym Smith Machine

Need someone experienced assembling multi-station home gyms. Cross X300 from Southern X Fitness. Base/frame partly assembled, need the rest completed including cables and pulleys. Located in Queanbeyan.

Experienced gym equipment installer to install the CRS800S spirit stepper. No stairs, setting the single cardio piece up.

This task will involve having power tools to set up a squat rack