Find experienced local carpenters in Glebe Point

I removed a 4-drawer stack (600mm wide) to install a dishwasher and now need those drawers moved to another cabinet on the opposite side of the kitchen. The target cabinet is about 18cm shallower, so all drawers must be shortened in depth to fit. Scope of work: * Move existing 4 drawers to the new cabinet * Reduce drawer depth by approx. 18cm (required for both options) * Modify drawers and/or cabinet as needed * Reinstall drawers with proper alignment and smooth operation Options (please quote for your preferred method): Option 1 – Modify to fit (simpler) * Shorten drawer depth by ~18cm (cut and rebuild the back of each drawer) * Keep existing drawer fronts (~600mm width) * Adjust internal structure as needed * Ensure drawers function properly and align cleanly Option 2 – Proper resize (preferred) * Shorten drawer depth by ~18cm (same as above) * Also reduce drawer width and drawer fronts to suit the narrower cabinet * Achieve a clean, built-in look with correct proportions * Maintain good structural integrity and smooth operation Preferred outcome: Option 2 is preferred if feasible, but open to Option 1 if done cleanly Existing setup: * Standard kitchen cabinetry * Drawer stack already removed * Target cabinet is empty and ready * All required cabinet boards/materials are already provided, no extra board should be needed Requirements: * Experienced cabinet maker or carpenter * Own tools required * Clean, professional finish * No damage to surrounding cabinetry Please include in your offer: * Which option you are quoting for * Brief explanation of your approach * Photos/examples of similar work if available Notes: * Open to suggestions if there is a better solution * Prefer a proper long-term result over a quick workaround

I need someone to build a tall cabinet to hide my electric box and meters. I have attached a picture of a sample of what I would want. Also, if you can, also to fix up my wooden fence

I need the timber lengths in the picture cut into thirds (or so). I need the bike lock in the picture cut as the lock and key are broken.

I would like to remove the current cabinetry, or trim down the bottom cabinet to be the same width as top cabinet (depending on what is possible).

I need a handyman / cabinet maker to modify an existing kitchen cabinet to install a washing machine under the benchtop and place a benchtop dishwasher above it/or a narrow dishwash on its left (on the carpet as per the picture). Both appliances will be supplied by me. Water inlet and drain have already been installed. Existing setup • Drawer stack approx. 60 cm wide located to the left of the kitchen sink • Standard kitchen benchtop above • Water inlet and drain already installed inside the cabinet • Wall power socket on the right wall above the benchtop (to the right of the stove) will be used to power the appliances Scope of work 1. Remove drawers Remove the existing drawers and runners. Remove or modify internal cabinet panels if needed while keeping surrounding cabinetry and benchtop intact. 2. Prepare cavity Convert the cabinet space into an open cavity suitable for a 60 cm washing machine. Ensure enough clearance for hoses and ventilation and make sure the base is level and stable. 3. Appliance connection Connect the washing machine to the existing water inlet and drain. 4. Electrical Appliances will use the existing wall socket visible on the right wall above the benchtop. 5. Finishing Trim exposed cabinet edges if needed. Ensure appliances are stable and functioning and clean the work area after completion. Measurements • Cabinet width approx. 60 cm • Photo available for reference

Create 35mm cabinet contemporary for shoes

The old timber counter now sits under the marble countertop and needs to be cut out for our fridge to have space to fit under bench. The area is approximately 1200x700. Job is in a cafe and will need to be done after 3pm.

Seeking someone to build a custom bench in solid timber (Ash/blackbutt/spotted gum) NOT plywood. Dimension of the bench should be: Bench top dimensions: 50cm depth x 80cm length x 90cm height. Legs: solid 'waterfall' timber legs on the end of each length. See pictures for creative direction.

Interior plywood kitchen benchtops and external timber breakfast bench require resurfacing and refinishing. See photos.

Repair replace cracked portion of timber frame on French door and realign to track so door is functional

Hi, I would like to install the stainless steel splashback wall into the commercial kitchen. Around 2400mm X 2000mm Please quote the price with the splashback since I don't have it. Shop in Glebe 2037

I need to replace to damaged timer doors. i have the doors which will need to be trimmed to size and the existing door hardware transferred over.

I want to create some open cabinets that go into my pantry. I've included all the measurements in the first photo but its roughly: 208cm long, 35cm deep, 87cm tall on the side and 105cm, 50cm deep, 87cm tall at the back (where you can currently see small shelves. I'm looking to just get it done in plywood but am open to ideas and happy to use flatpacks/prefab if that's a lot easier/cheaper. Not looking for any fancy benchtop as will not be using it for chopping, more for storing appliances etc.

Wet towel left on floor (hence pattern). Noticed this last night (Tuesday).

Looking to modify the left row of base cabinets (see photo) to fit a dishwasher and washing machine under the benchtop. I want minimal changes to the current layout and a neat finish. Open to your input on the best final configuration before work starts. Scope Remove/adjust existing cabinets and kickboard on the left side. Create two 600 mm openings. Keep existing benchtop and overall layout. Tidy up exposed edges and panels. Appliances supplied separately (not part of this task). Please include - Photos of similar work or brief experience. - Availability and estimate for completion cost and time.

Require overhead kitchen cupboard reduced in size by approximately 5cim to accommodate new extraction fan. Reinstal fan

The current stained glass (pictured) is plain. Require another pane of glass either plain but different to the current one or possibly another with a pattern or a different colour.

I want my menu boards hanging down from the roof, it’s heavy . May weigh upto 5-7kg(asshmption). There is a 2cm hole on the corners of the boards.

I want to have a cabinet and shelves with sliding doors that sit flush under the kitchen bench, this can be built or pre-fabricated as long as it fits the space.

1. 1 small stained pane of glass has broken and fallen out of stained glass window. Clear glass. 2. Antique cabinet has damaged stained glass panel requiring repair. Can provide photos of damage for each