Find a professional gate installation near you

Need a a auto matic gate programed Gate in place 240v power supply in place New sensis 2 motor installed just needs programing

Install electric gate to rear of corner block Wooden gates already there

Automatic gate stopped working , needing it fixed . Have a manual for the gate

Looking for someone to remove the old automatic gate system and install a new one. Gate controls need full replacement. Please quote for labour and parts. Location: Airport West, VIC 3042. Experienced gate technician required.

There is an issue with the automatic gate which i’m not sure what the cause is. We need someone to fix the gate and make it functional

The automatic gate motor is not working, the wheels came off.

After a gate supplier for supply and install of a double car width or larger, manual or automatic gate.

I need a new front fence with sliding automatic gate, and a new back fence with a pedestrian gate. The old fence will need to be removed

Install solar automatic gate opener gate is already installed

My automatic sliding gate is currently not opening or closing properly and needs repair. The issue appears to be with the gate latch/receiver and alignment near the brick pillar. The metal catch that locks into the wall-mounted receiver is misaligned or not engaging correctly, which is preventing the gate from operating as it should.

2 swing gates, need automatic opening. *Power available *Need over concrete cover * can provide system * or you can provide system product. City of Knox Do not quote if you exceed $350 (unless you are providing the system) PS: I have researched prices (Kenner and such) , do not high ball .. Thanks

Automatic Gate motor is not working.

Anyone installed these before? Looking for someone who know what they are doing

Automatic gate has stopped working. Checked the remotes and all ok. Looking for someone to have a look at it today

Need gate to be reprogrammed. Was working fine, circuit card was hard reset when trying to pair key remotes. Supply all tools and specialised equipment. Reprogram gate. Pair remotes to gate. Thanks in advance. Craig

Automatic Gate Motor not opening gate Foresee F500. Motor not opening, has power and signal to the board, the motor is clicking but not turning the gear. Previously have adjusted the track which has solved the issue.

I have double colourbond fence that I want double gate opener installed. You supply parts and fit. Does anyone do this as a job don’t want someone who thinks they can do it. Thank you

Needs to service and needs a spare remote. Looking for a reasonable quote

The mounting plate where the automatic gate motor articulates has become detached from the post it was initially spot welded to. I'm looking for someone experienced in metal work and welding to prepare the mounting surface on the post to enable the reattachment the mounting plate and weld the plate back in place.

The screws on one of the automatic gates have loosen

We have an old timber painted gate. The timber is rotting so I need a timber replica built and hinges and latch moved from old to new gate. Task would include buying materials, making the new gate and installing.

Remove one old double timber gate and replace. Remove one old single timber gate and replace. New gates to be made from timber. Build one small slatted fence, approx 3 metres long.

Large outdoor timber gate / door. Need to change direction from opening inwards to open outwards. Also to install a deadlock / deadlatch (supplied)

Need a timber gate for front entry to property prefer steel frame with timber slates to match existing fence

Fence Timber Gate has come off, need help to put same gate back.

Timber side gate to be replaced. New one to be purchased from bunnings. Product image of the one to be replaced. May need side post replacement

To replace a sideway timber gate (making from scratch or custom a pre made one). We need a new gate, frame, hinges, lock and installation.

Raise timber gate by 10cm. Add a 10cm high block of wood underneath the raised gate so minimal gap to ground. No painting required

Repair outside 1 by 2 meter red cedar timber gate, remove 2 damaged timber sections and replace with new timber sections

Gate is lightly/partially sanded. Need it fully sanded (one side only) in preparation for staining by myself.

Custom built timber gate needs to be modified with a cut-out to accommodate new PVC pipe that is mounted close by. Gate needs to be reattached more securely to the wall (anchors have come away several times previously). Gate needs to be reswung and adjusted so latch/bolt fits keeper. Estimate 2-3hrs labour, and a small allowance for hardware (anchors etc).

Install gate (maybe make one)

Timber frame of outdoor gate has split and the fence has come off from the frame completely so needs a new frame and gate to be re attached

1 gate to replace existing, 1 gate to enclose underhouse space, are required. Pererred material is timber.

See pictures attached for your reference one side gate has fallen. Need timber post and bolting the door to timber post I believe

Description: I need a handyman/carpenter to carry out minor repairs on an outdoor timber gate. Scope of Work: 1. Replace the top timber rail on the gate — the existing one is weathered and slightly detached. 2. Install a new gate latch (standard side gate latch; please supply if possible). 3. Replace the vertical timber support post on the left side of the gate frame — it’s deteriorated and no longer securely fixed. 4. Check overall gate alignment and ensure it opens/closes smoothly once repairs are complete. Materials: • You can quote for supply and installation of replacement timber and latch. • Please ensure the new timber is treated and suitable for outdoor use. • Paint or prime to match existing colour (if possible). Access: Ground-floor courtyard, easy access from driveway.

Repair timber driveway gate

need to install 2 x Timber gates exactly the same dimensions to side of property/ also happy for Colourbond gate as option

Need someone to come and fix an old pedestrian gate. It needs new hinges, replace or patch one new fence pailing and a new latch

Need to install new timber gate and side panel. See photos of old one.