Find a professional gate installation in South Moreton Bay

Installation of 1369mm wide colorbond gate. I have all materials on ground and just need installation.

Looking for someone to reconnect the side gate as shown in the picture, you will need to have about three bolts to screw one side into brickwork

Change a colourbond fence from a hard return to a gated fence

Needing to put in two baby gates that require drilling into the wall.

Combination tailgate release / door ajar sensor needs to be disabled , flattening battery

Install perma child safety retractable gate Must have tools. Phillips head screw driver Drill & drill bits

Looking for an experienced automatic gate technician to inspect and repair a solar-powered automatic driveway gate. The gate is currently not operating correctly and needs troubleshooting to identify the issue, which may involve motor, controller, sensors, remote system, or gate mechanism. Please bring the necessary testing tools and have previous experience with solar-powered automatic gates. Please submit your genuine and reasonable offer, along with your experience and availability. If parts are required, please identify the fault and discuss the cost with me before replacing anything. Looking for someone reliable who can diagnose the problem properly rather than simply replacing components unnecessarily. Location: Warner 4500

This is the second time the gate post has pulled away from the rendered neighbour's wall leaving two damaged mounting points. The gate is now loose again and needs to be securely reattached. The render around the fixings has also chipped away. I'm looking for someone who can properly and securely reattach the gate post to the wall and advice if any reinforcement is needed. Photos attached

Our side gate's hinges have rusted and need replacing. We will need 2 new hinges and someone to install them to fix the gate.

To whom it may concern, I'm after a quote for a two-part outdoor renovation at my property near North Lakes. Both existing surfaces are rotting timber to be fully removed and replaced with exposed aggregate concrete. I'm looking for the most cost-effective option, so I'd welcome any suggestions on where I can save without compromising durability. Site photos are available on request or at inspection. PROJECT 1 – Pool deck replacement (approx. 36 sqm) - Existing raised timber deck – full removal + rubbish disposal - Ground prep, base compaction, formwork - Supply and install reinforcing mesh - Pour exposed aggregate concrete – 25 MPa, 110mm thick - Please use a standard/economical aggregate (e.g. basalt or river pebble) rather than premium selected stone, to keep costs down - Acid wash + seal – please confirm this is included and how many coats Glass pool fence coordination: there are 9 glass panels + 11 base-plated posts currently on the deck. I'll arrange a glass fencing company to temporarily remove the panels before you start. Please advise if your team can core-drill the posts into the new concrete after pouring (optional – please quote separately), and how long the pour needs to cure before that can happen. PROJECT 2 – Front entry deck replacement - Rotting timber deck/pathway at front entry - Same exposed aggregate finish to match the pool area - Removal of old timber, ground prep, formwork, pour + seal - Exact area to be confirmed at site inspection Could you please provide: 1. A detailed itemised quote – materials, labour, and rubbish removal, separated per project 2. What's included / excluded (sealing coats, mesh, base prep, tip fees) 3. Your best combined price for doing both projects together 4. The most economical aggregate options you offer 5. Any workmanship warranty 6. Your availability for an onsite inspection and quote Thanks very much – I look forward to hearing from you.

To whom it may concern, I'm after a quote for a two-part outdoor renovation at my property near North Lakes. Both existing surfaces are rotting timber to be fully removed and replaced with exposed aggregate concrete. I'm looking for the most cost-effective option, so I'd welcome any suggestions on where I can save without compromising durability. Site photos are available on request or at inspection. PROJECT 1 – Pool deck replacement (approx. 36 sqm) - Existing raised timber deck – full removal + rubbish disposal - Ground prep, base compaction, formwork - Supply and install reinforcing mesh - Pour exposed aggregate concrete – 25 MPa, 110mm thick - Please use a standard/economical aggregate (e.g. basalt or river pebble) rather than premium selected stone, to keep costs down - Acid wash + seal – please confirm this is included and how many coats Glass pool fence coordination: there are 9 glass panels + 11 base-plated posts currently on the deck. I'll arrange a glass fencing company to temporarily remove the panels before you start. Please advise if your team can core-drill the posts into the new concrete after pouring (optional – please quote separately), and how long the pour needs to cure before that can happen. PROJECT 2 – Front entry deck replacement - Rotting timber deck/pathway at front entry - Same exposed aggregate finish to match the pool area - Removal of old timber, ground prep, formwork, pour + seal - Exact area to be confirmed at site inspection Could you please provide: 1. A detailed itemised quote – materials, labour, and rubbish removal, separated per project 2. What's included / excluded (sealing coats, mesh, base prep, tip fees) 3. Your best combined price for doing both projects together 4. The most economical aggregate options you offer 5. Any workmanship warranty 6. Your availability for an onsite inspection and quote Thanks very much – I look forward to hearing from you. Kind regards, Irene North Lakes, QLD

Assemble and install an electric gate to top of driveway. May need some cement/tarmac laying on one end of the driveway to build it up due to sloped driveway Gate is here: https://www.alphaautomation.com.au/4200mm-double-swing-driveway-gates-opening-1500mm-h-4-2x1-5m-horizontal-slat-gate-hinges-satin-black-powder-coat-with-double-swing-automatic-gate-motor-5316 There is currently no electricity to the gate - this will be installed by our electrician after installation of gate. Post are strong enough for the gate and don’t need replacing. Open to inspections and quotes

Turn this into an outdoor gate Cut the fences panel , out change it into a double gate Will provide hardware for gate I also have other work if this goes well

Replace 5 palings on wooden gate. Create a hand hole for latch

Attach pool type fencing and gate approv x 2.5m in total to existing balcony fence (timber) and house exterior wall (brick)

Our gate is very sturdy steel gate but the roller had broken so can’t close it and I have a little dog so need done asap. Also have a wire fence that needs redoing partially

Looking for an experienced handyman or carpenter to install a Bunnings side gate and fixed panel against a brick wall. The old door and panel have already been removed, and there is an existing timber block attached to the brickwork that looks fine to reuse. The task involves attaching the new fixed panel and hanging the gate from this existing timber structure so it swings smoothly. I have the gate, panel, and basic hardware ready, so you will just need to bring your own tools and any standard trade consumables (like extra screws or packers) to complete the setup. Please provide your quote for labor and your availability this week.

Fit tailgate lock to my triton. Hsp brand lock. Need before Thursday please.

Toilet is leaking from what looks like the waste pipe. Need to investigate and repair the leak. Need a qualified plumber.

Block pier has been reinstated, just need the one half of the aluminium double gates reinstalled, with new supplied gate hardware, and hinges to be removed from the damaged block pier. 1 aluminium screen to he reinstalled also. Pier was blown over in the cyclone.