Find a professional gate installation in North Moreton Bay

Supply and Install a Colorbond fence with front gate for a newly built house. Scope of Work: Install a Colorbond gate at the front of the property Approx. 3.7m wide opening (between my wall and neighbour’s garage wall) Height: 1.8m (to match existing fencing) Include all posts, hinges, latches, and fittings Double gate required No removal required Preferences: Colorbond Fixed quote including labour + materials

I have a pair of large colorbond gates (each approx. 1650mm wide) that provide access to the side of my property. Unfortunately, one of the gates has sagged to the extent that the latch bar no longer engages properly with the actual latch. I believe the problem can be rectified by positioning a wheel on one of the gates to help lift it back to its correct height. I am happy to consider alternative solutions to this problem, too. I am happy to supply a suitable wheel from the local hardware store - this is not included in the suggested price. See images attached.

Supply and Install a Colorbond fence with front gate for a newly built house. Scope of Work: Install a Colorbond gate at the front of the property Approx. 3.5m wide opening (between my wall and neighbour’s garage wall) Height: 1.8m (to match existing fencing) Include all posts, hinges, latches, and fittings Double gate required No removal required Preferences: Colorbond Fixed quote including labour + materials

Looking for an experienced fencing contractor to supply and install a Colorbond front gate for a newly built house. Scope of Work: Install a Colorbond gate at the front of the property Approx. 3–3.5m wide opening (between my wall and neighbour’s garage wall) Height: 1.8m (to match existing fencing) Include all posts, hinges, latches, and fittings Gate should be sturdy and aligned properly for long-term use Ensure smooth opening/closing (single gate) Remove any debris and leave area tidy Site Details: Easy access Flat surface New build property No demolition required Preferences: Colorbond (preferred), but open to similar quality alternatives Fixed quote including labour + materials

Welding required to reinstate a gate hinge.

to program 2 remotes, a keypad and also adjust settling on our DITEC gate ( close quicker) we are at Upper Caboolture

remove baby gate, patch drill holes and paint patch and paint wall

Need installation of a SpecRite 1833 x 900mm Pre-Oiled Merbau Gate from Bunnings. I will provide both the gate and the posts, along with hinges and locks. Gate to be installed just behind the power/energex meter box as usual. Please advise on what hinges and locks to buy as I not 100% sure. The side access is 1.08m wide wall to wall, and the gate is 0.9m wide. I would like the gate post to be bolted on to my brick wall, and on the neighbour's side, the post is to be installed into the ground so that we don't drill on to his wall. Any questions please let me know.

The gate opens the wrong way, the gap below is too big. I need it repaired. I also have a small fence at the side I would like as a gate. And maybe a few fence repairs nothing major tho.

Replace pool fence style panels x 2 and double personel gate x 2 with colorbond style sawtooth profile gates and panels

Unload the sliding gate and hold it in position while the technician secures it. Approx: 40 minutes. requested time: 9-9:30 am

Timber gate in corner needs new post to attach gate with hinges. Collapsed 5 months new colour bond on the back boundary will be fixed by original contractor. Please see photos. 1st photo after the storm 2nd photo taken from inside garden, it was before the storm, in perfect condition

Sliding gate has come off the rails and needs a new wheel and to be put back on the rails

Knock down a 1.5m brick wall, dig a trench and install a drain/pipe from an existing pit, and install a side gate.

I need a gate motor re-attached. The screws have come off. Need a permanent fix so it doesn’t happen again. See photo

Both side gates repaired. Missing boards replaced and hinges repaired or replaced. Realign both gates.

I need this gate fixed. It has come off from both hinges due to the wind and screws come off distorting the holes. I need it fixed with galvanised screws or bolts.

Just purchased a house previous owner had sliding gate customs made with post and parts but never installed.can I have price to get it installed

The latch on my gate keeps slipping which allows it to be blown open in the wind. I’d like to be able to trust it to close, and the ability to padlock it. Pretty certain no new hardware is required and it just needs that other bolt replaced as had no issues with it when there were 2.

Gate hinge has rusted out. Purchased new hinge but needs to be welded onto fence and fitted. Located North harbour