Find a professional gate installation in Rowville

Install a electric motor on this gate it opens towards the photo Cant go the other way as it’s an incline Have a power point in the red circle

I need to extend my driveway by another 15m2

The metal hinge on the backyard access door has broken away from the metal frame, causing the door to become loose and difficult to open and close safely. The hinge and surrounding frame require welding or suitable metal repair to securely reattach and realign the door. Rowville , VIC

Hi, I will purchase the gate and fencing but need it to be installed

Outdoor side gate. Frame already in place as seen in the pic Rough overestimated gate length Non opening side 75cm Gate opening side around 125 Aluminium or steel gates Pictures of the gate needed attached

Augment and fix a wooden garden gate

Gate has come off the hinge. There are no pins left to attach and the latch has come off, no longer useable. Haven’t sourced a new latch or pins, would need these provided

The gate is sagging. Larger and stronger hinges are required in place of the existing hinges

I need a quote for a 2.7m fully customised gate —- gat will have a square brick style pattern to match an existing fence.

The outdoor keypad stopped working few years ago as we cut a wire (attempted to install app). Looking for an electrician that is willing to spend half hour to see if it can be fixed an opening up the socket.

Gate hinge needs to be replaced

Replace 6 meters of presently leaning 2m high lapped and capped wooden front fence and re-post and re-hang 3 meter wide double lapped and capped wooden gate.

power tech pl500 stop working

We are looking to install a gate and fence for our house. Attached photos for the design. 17m . Need sliding electric gate and a small gate. Also need to add postbox and parcel drop off box. Thanks

Existing steel Gatepost fixed using 2x dynabolt need to move up by an inch as it is touching the ground Currently fix with 2 x dynabolt as shown in picture. Need to be removed And moved up by inch so that it can swing open properly. Other side of the post can stay as it is I have following bolts if that helps Dynabolt DP06 x 100mm Dynabolt DP10 x 125mm Ankerbolt 8mm x 100mm If you think above is no good, supply your own and install Need to be done by Tuesday

Replacing of sliding gate guide block.

Pool gate hinge adjustment needed. I’ve replaced the hinges as the old ones would not self close. However I’m unable to completely align the door to get it to self close with the new hinges. The hinges may need a hole drilled in to them (not the glass) to allow door to self close.

Cracks on the wall and the cracks are moving.

need fence posts installed and gate frames hung

Side gate of the house is on right side. Need to swap it to the left hand side. See picture No structural work required Alternatively gate currently opens inwards. If you swap hinges to open out should also work.