Find a professional gate installation near you

Remove and replace gate latches x3 + remove and replace gate hinges x6 3 gates in total - Due date: Flexible

Wanting automatic gate instlled - Due date: Flexible

Clean gutters, Change a small part of rotten board of the exterior wall Seal a hole of the roof of garage Ease the window to open of bathroom - Due date: Before Friday, 1 September 2023

Brick size 250x150 four bricks per course, 8x courses high x 2 pillars. Wooden posts and 600x 600 footings done. Brickwork only. Bricks supplied. - Due date: Flexible

i need a small fence installed - Due date: Flexible

Just a wooden swing driveway gate - Due date: Needs to be done on Tuesday, 16 May 2023

Current Smart Gates electronic gates installed - want to access using mobile phone - Due date: Flexible

Hi, quote needed for fixing the front gate of Red Beach Playcentre. The gate needs to be self-closing. It needs repair. The gate must close within 4-8 seconds of letting it go from 90-degree angle. Possibly needs new spring hinges and gate position lifted (it should not be touching the ground). Thanks. - Due date: Flexible

My metal gate has an existing rectangular hole for an old lock that needs to be made bigger for the replacement. I also need to drill holes in the metal for attaching the lock. The metal is 3-4mm thick. 2 of the holes are 9mm diameter and the 3rd is 18mm. Existing latch plate on adjacent wall will need relocating - drilling into masonry. Inside I am hanging 2 curtain rods so need the holes for the brackets drilled - 8 holes in masonry block. - Due date: Flexible

Install aluminium pool-type fence for three sections (1.75m, 2.63m and 1.91m) with a 1.08m gate. Install driveway gates (x2) covering a gap of 2.78m - Due date: Flexible

We want to install a sliding gate on our driveway, but the front deck has no gap with our fence, so need to cut the deck - Due date: Flexible

I need help installing a garden gate. - Due date: Flexible

Our entrance wooden gate is shrunken every wet season and it can not be closed properly. - Due date: Flexible

We have a pair of 4 metre high metal entrance gates (extremely heavy i.e. manually unmovable), attached to gateposts. They need bringing down. Right gate’s lower hinge has rusted. It blew off its lower hinge 10 days ago, during extreme wind. We reckon the only way to get both gates down flat onto ground (without a crane) is to cut them up into 8 smaller pieces (with, say an axle-grinder). With regards removal off-site, we have storage space to keep the scrap metal, so no need to quote for removal. Alternatively, if you wish to take metal away & sell for scrap/keep for yourself, then you're welcome to do so, at your own expense. If you wish to organise a crane & truck to take away both gates entirely intact (i.e. not cut them up first), then we would just pay you the equivalent cost for simply cutting them up. We won’t pay for your crane & truck hire, and you get the gates to sell/use afterward as you wish. If you’re willing to take away the gates entirely for free, then we can also offer you the gateposts & the pair of pedestrian gates that come with them, as a package deal i.e. 2 main gates (1 damaged), 2 gate posts (1 damaged), 2 pedestrian gates (both undamaged). There are also 2 identical gate posts at the service entrance, should you wish. Click on this link to see photos: https://www.dropbox.com/sh/yw7zxftm9mhidmb/AADKEl076uvivX-btmr6MIF-a?dl=0 Option A) If you just want to cut-up gates, quote for following: cost to cut-up 2 main gates into 8 sections cost to cut-up 2 main gateposts into 4 sections Option B) If you want to cut up gates & keep scrap metal yourself, quote for: cost to chop up both main large entrance gates into 8 sections Option C) If you want package deal i.e. handle all removal off-site yourself, gratis, then no need to quote for items 1) & 2) above. Just let us know what date you can remove in next 10 days. Weekends or after hours (between 1800H~2100H), ok. - Due date: Before Thursday, 31 March 2022

Install internal aliminium gate Parts supplied just need labour - Due date: Needs to be done on Saturday, 5th Feb 2022

Install large post and 4.5m x 1.8m gate. Dig hole - Mix concrete Install post gate and Ferrell

Hi there the gates hinges and lock close thing still work fine it's just I think the wood of the fence or gate have warped in the weather so it no longer snaps shut on its own.

Install Timber Posts into ground with Quick set and then Install ferrels and Gate to posts. Gate is 3.5m Long by 1.8m high. Wheel to be installed as well to gate.

I need to have a gate built and installed, so the dog can't get out. And to have a shed built, so the dog can get shade during the day. Area is already fenced.

Gate is too heavy for the bolt that was put. Also the gate is sagging. So it needs to be strengthened through support and May be additional hinge.