Find a reliable appliance technician in Fitzroy VIC

Connect Coffee Machine to Electricity We need a qualified electrician to connect our coffee machine to power at our premises. Details: Coffee machine power requirements: Single-phase: 200–260 V AC, 50/60 Hz, 35 A Three-phase (optional): 380–400 V AC, 50/60 Hz, 22 A Total wattage: 6,300 W Brew tanks: 1.7 L, 600 W Steam tank: 12 L, 4,500 W I have attached a photo of the current switchboard for reference. Requirements: Must be a qualified/licensed electrician Ability to safely connect the machine to the correct power supply Advice on whether single-phase or three-phase connection is best is welcome Please contact me if you have any questions or need further details.

The circle mental part of the spinner is pooping out from the front. The washing machine won’t spin and gets stuck.

2 fridge in cafe playing up with temperature sanden Intercools may be regassing issue

Replace and connect old commercial gas stove to new one also connect a gas kitchen griddle. We can provide all the parts needed to have done the job.

Haier washing machine is leaking from underside / back. Need someone to assess and fix if possible!

Fridge has been making a strange noise and now it’s constant.

I got a new commercial underbench fridge & stupidly the power button got hit and came off, (in photo it is very loosely sitting there) as we were moving it into kitchen, We need it operational ASAP!

Oven red light (above the grill word) comes on and the oven heats up slightly without having turned the oven on - needing someone to come check/fix this.

Our washing machine has two problems 1) Every 15 minutes the cycle keeps pausing and shows up with an “E-10” error notification usually where the time is displayed. When we press pause/play the cycle continues until it pauses again, sometimes without using the washing soap detergent. We had it repaired one month ago and it was working fine but now it’s back to the same problem. 2) Sometimes the washing machine foams with soap detergent overflowing underneath it (see image).

Check my 4x4 auxiliary battery and rewire 12V charging outlet if battery intact. Currently my fridge/freezer not charging due to low voltage and the 12V charging outlet is disconnected.

Attach new plug to my cord on washing machine. Quick job. Removalist’s broke my washing machine plug and then cut off so I could get it replaced. Told me I could it myself but unsure how Can you come to my Fitzroy apartment to fix by Sunday please? Need Stanley knife and pliers. Screwdrivers & plug provided. Also I have a licensed electricians voice notes to follow for correct instructions (a friend did it for me but is unavailable). Quick job done ✅

Fix my washing machine Hose not working - View all the details of this offer: https://www.airtasker.com/offers/01KCCRMRHRDH8P8N1C0TGM3HZM

Hi, we need someone to replace a broken plastic pipe that is used to drain the water from our dishwasher. Nothing to do with the electronics of the appliance - just the pipe.

I have a 24L aquarium that just needs the filter/pump assembled. Should really be a 5-10 min job but I suck at reading instruction manuals and I’ll be honest I’m rly hungover. But I want my fish to have a new home <3

Instal replacement seal in washing machine and unclog shower drain (plumbing)

We need to get this tap undone to connect dishwasher inlet here Looks like it has been glued and appliance service techs tried to undo tap but it is putting too much pressure on copper brazing work which has mains attached to it , we are on level 2 in fitzroy and we are trying to find plumber who can either change tap works here under sink and connect dishwasher. Ideally need this done before 1pm today

Simple install of dishwasher. Will pay bonus if you take old well-functioning dishwasher with you

We have an old washing machine we need swapped for our new one. Washing machine is in a hard location and requires glass door of shower to be removed to get it out/in. Need to connect plumbing with new one. The dryer (on top) has been removed

Hi. The cold tap is broken and needs to be fixed. I need the washing machine/dryer tower to be connected and water checked. It needs to be moved into the cavity. It is very heavy. Link to it https://www.lg.com/au/washer-dryers/washtower/wwt-1209b/?region_id=2023003&utm_source=google&utm_medium=cpc&utm_campaign=HQ-HS/ES-D2C_HS_WM_AU_25_NA_Assembly_WM_LG.com_purchase_NA_google-ads_PMAX_OTH_tROAS_PUR_AO&gclsrc=aw.ds&gad_source=1&gad_campaignid=20857613013&gbraid=0AAAAApcJNx4xrgtiO-sBp51KZSM-hXWNY&gclid=CjwKCAiA55rJBhByEiwAFkY1QIB5noNUWU6-IO49ehnuiqXDiyzTrGIvlwVfSpGLIkGS-JfPVZ-SLBoCMgcQAvD_BwE

I just moved house, and when re-connecting my machine to the taps at the new place, there is a leak at the wall tap. I'm looking for someone to help me install it correctly so the tap doesn't leak. It's a Bosch (photos attached)