Find an Apple Mac repair technician near you

I want to increase the ram in my 2019 27 inch computer asap

Looking for someone experienced with MacBook hardware repairs or micro-soldering who might be able to repair this without replacing the entire display assembly. Laptop: • MacBook Pro 15" • Model A1707 • 2016/2017 • Otherwise fully working and in good condition Issue: When opening the lid the screen stays black because the laptop doesn’t recognise that the display has been opened. Still comes on at 20/30 degree angle. This appears to be the well-known Flexgate / display flex cable issue on these models. From what I understand the backlight / display flex cable in the display assembly is too short and fatigues over time, which causes the connection to fail when the lid moves. The display itself still works fine, but the connection seems faulty due to the flex cable when the lid moves. I’ve been quoted $1100+ for a full display replacement, which seems to be the standard shop solution. However I’ve seen examples where the flex cable is repaired individually, extended or replaced instead of replacing the entire display. I’m aware this might require micro-soldering or a creative fix, and I understand there’s no guarantee but at this point I’d rather try that than spend $1100 on a nearly 10-year-old MacBook. That said, I’d also be open to a full display replacement if someone can source a cheaper part. I’ve seen replacement displays on eBay for much less, so if someone can install one for a reasonable cost that could also work. I’m quite attached to my trusty old MacBook and would love to keep it going if possible. If you have experience with: • MacBook display repairs • Flexgate fixes • board-level repairs • micro-soldering …feel free to reach out. If helpful I can also send a short video showing the screen working at certain lid angles and going black when opened further. Budget flexible depending on repair approach. Located Ocean Grove, happy to bring it to you.

I have a MacBook Air 2022 with a damaged screen. The laptop turns on but the display has lines and needs full screen replacement. Looking for someone experienced with MacBook repairs who can: * Replace the screen * Check everything is working properly after repair * Provide quote including parts and labour Location: Liverpool Model: MacBook Air 2022 Please message with: * Your price * How long repair takes * If you use genuine or aftermarket parts

Connect two screens to new MacBook Air 13

Our Hp envy printer is offline, I cant get it connec to Mac desktop WiFi. Plus need Mac desktop checked to make sure its updated etc.

Looking for someone reliable and organised for 2–3 hours to help me create folders on my Mac and organise videos/photos for my virtual assistant in the Philippines. The job is very simple:• Highlight/select videos and photos• Create folders• Upload and create Dropbox links Would suit someone organised and comfortable using Mac and Dropbox. Located in Melbourne CBD / Carlton area. Please message me if interested. Thank you 😊

My 2017 MacBook Pro 15inch needs a screen replacement. Anyone offering that service including the screen?

Hi! Looking for someone to replace the screen on my MacBook Pro. The screen is cracked but the laptop still works perfectly fine — I’ve confirmed it works on an external monitor. I’m on a tight budget so looking for the most affordable option possible. Open to independent repairers or anyone with experience fixing MacBook screens. Please message me with your price and availability. Thanks!

I have a black screen on my macbook air and it won't turn on. Would love to get my files off the computer.

I Mac is not working, and Apple suggests to retrieve data from hard drive

We’re a custom metal fabrication workshop based in Wacol, QLD (All Racks & Accessories). We operate multiple CSM bending machines and need an onsite contractor to digitise and organise our bending program data. All data is currently stored in handwritten log books and needs to be converted into a clean, searchable digital system. Scope of Work • Scan or photograph handwritten bending program books • Create a searchable digital database (Google Sheets, Excel, Airtable, or Notion – open to recommendation) • Set up a clear folder structure and file-naming system in cloud storage • Enter and organise program data including: – Machine size (63mm, 76mm, 40×40, 100mm) – Brand & year – Program number – Notes (material, bends, special setup info) • Attach scanned files to each program entry • Create a simple template for adding new programs • Briefly show us how to use the system once complete

This is a large Apple Mac desktop device that I use less frequently these days than perhaps in the past but I have a support.apple.com/mac/start-up and a flashing folder with a ? In it. I’ve tried the basic tricks but it is still not starting correctly and possibly needs a review as it has been performing slowly of recent times as well.

Hi, I've purchased a new battery (SeaPlant Battery A1990) which has tools and instructions. However, I think I might get someone to do, giving time and risk. Could you please quote price to do (if I come to you and if come to City). Also, my right speaker is not working the best, so potential quote or replacing this (figured if going to do the battery, may as well do at the same time). Thanks.

I have 2 webcams connected to a desktop computer. I want to be able to watch both cameras from the desktop they are connected, another desktop on the internet, and my phone. All of these computers/phones have internet.

Macbook Air M1 2020 is not charging. May be a fault with USB ports or battery

I need someone to come to my home in Brisbane to set up a brand new Mac Mini M4 from scratch. The Mac Mini is plugged in and ready to go but I don't have a USB-C to USB-A adapter to connect a keyboard and mouse (the M4 has no USB-A ports). You will need to bring your own USB-C keyboard and mouse, or a USB-C hub/adapter. Here is exactly what needs to be done: Complete the initial Mac Mini setup wizard (language, region, wifi, computer name, password) Download and install RustDesk remote access software from github.com/rustdesk/rustdesk/releases/tag/1.4.6 - specifically the aarch64.dmg version for M4 Configure RustDesk with a password and provide me with the 9-digit ID and password so my developer can connect remotely going forward The Mac Mini needs to be named "BossMoney-Server" during setup Please only apply if you are comfortable with Mac setup and have your own equipment. Brisbane southside preferred.

OS update required (currently running Catalina) Back up required Loud/noisy fan (investigate issue, determine action) Happy to bring laptop to you if required (Melbourne VIC only)

Hi, I’ve recently switched from Microsoft 365 Personal to Microsoft 365 Business Standard and need help finalising the setup. 1.5 - 2 hrs of work in person @home office, Hamilton Hill, WA Issue 1 (main problem): I have two licences (one for me, one for my husband). My apps are working correctly on my MacBook, but on my husband’s MacBook the Microsoft apps (Word, Excel, etc.) won’t activate. Apps install successfully Sign-in/activation is not working properly Reinstalling hasn’t fixed it Issue 2: I’d like my OneDrive checked to make sure it’s set up and syncing correctly under the Business account. What I need: Diagnose and fix the activation/sign-in issue on macOS Ensure both licences are correctly configured in Microsoft 365 Confirm apps open and work normally on both devices Quick check that OneDrive is set up properly Setup: 2 x MacBooks Microsoft 365 Business Standard (2 users) Admin access available I’m a sole trader who recently set up a company, so just want to make sure everything is configured correctly moving forward. Ideally looking for someone experienced with Microsoft 365 Business + Mac.

I have a Macbook air which has been sitting in its box, and I need someone to set it up for me. I have a portable hard drive, with data that was taken off another older computer, and I wanted it set up with this files.

An old windows 7 computer with specific (Saflock) software has broken down Using a HDD, this needs to be turned into virtual machines on two PC's, that is able to interact with a USB card programming machine We were able to create a virtual machine, however struggling to have this interface with the USB card reader