Find a professional fitness equipment installer in London

I need to move an already assembled treadmill, multigym machine and cross trainer machine into a nearby room, they will need to disassembled first moved in parts then reassembled.

Insert 2 blind internal spring pins into a Primal gym rack. Kingston upon Thames, England Hi there! I need a local handyman to help fix a specific, tricky component on an already-assembled Primal Performance V2 Half Rack in Kingston upon Thames. The gym rack is 99% fully built. The only job is fitting the spring pop-pins into the overhead rotating pull-up handles. The Challenge: The overhead steel frame is a completely enclosed box section. To fit the pin, a solid metal locking block has to be pushed in blindly from the back of the handle slider block, lined up perfectly with the internal tracks, and then held steady while the spring-knob head is screwed onto it from the front. What is needed: It requires a bit of patience, a steady hand, and a thin tool or guide wire (like string, a long thin screw, or thin pliers) to prevent the block from slipping inside the enclosed frame.The heavy lifting is completely done; it is just a fiddly alignment job.It shouldn't take more than 15 to 20 minutes for someone with the right approach. Please let me know your availability. Thank you!

1.8 x 1.2m Whiteboard installed in a gym studio: Installing on a plywood wall so correct Rawle Plugs will be required. Fixing a broken Toilet Seat: The toilet seat is intact. The Screws have just come loose. Realigning the studio fans that are out of place: Photos of nuts and bolts on the fans attached. We have a stepladder that can be used.

link for the product https://www.argos.co.uk/product/6207467?utm_custom6=PLA&deeplink=true&gclsrc=aw.ds&&cmpid=GS001&_$ja=tsid:59157|acid:629-618-1342|cid:20368875273|agid:|tid:|crid:|nw:x|rnd:930183884873562078|dvc:c|adp:|mt:|loc:9046081&utm_source=Google&utm_medium=cpc&utm_campaign=20368875273&utm_term=6207467&utm_content=shopping&utm_custom1=&utm_custom2=629-618-1342&GPDP=true&gad_source=1&gad_campaignid=19672026602&gbraid=0AAAAAD9II9lr6xX7EybyFRuMHcDeLS01F&gclid=CjwKCAjwiL7VBhA-EiwAhZi9EFFGfiN2RdfI12IRpEckjdR5q3Xkf2LwosfQdMs84MX9kkPYfiLjIxoCziYQAvD_BwE

Need someone to assemble this multigym https://strongway.co.uk/products/strongway-premium-multi-gym-smith-machine-with-weights-3-weight-stacks-multifunction-home-gym-machine?variant=56573593190781 Also have a squat rack need someone to disassemble and dispose of that

Assembly of a mirafit home gym equipment

Hi there! I need a local handyman to help fix a specific, tricky component on an already-assembled Primal Performance V2 Half Rack in Kingston upon Thames. The gym rack is 99% fully built and ready to go. The only job is fitting the spring pop-pins into the overhead rotating pull-up handles. The Challenge: The overhead steel frame is a completely enclosed box section. To fit the pin, a solid metal locking block has to be pushed in blindly from the back of the handle slider block, lined up perfectly with the internal tracks, and then held steady while the spring-knob head is screwed onto it from the front. What is needed:It requires a bit of patience, a steady hand, and a thin tool or guide wire (like string, a long thin screw, or thin pliers) to prevent the block from slipping inside the enclosed frame.The heavy lifting is completely done; it is just a fiddly alignment job.It shouldn't take more than 15 to 20 minutes for someone with the right approach. Please let me know your availability. Thank you!

Assemble Marcy mwm4965 home gym

Multi home gym with leg press installation in out house.

Primal Multi Rack System - MRX 5.0

2 Gym mirrors that need to be mounted to in house gym wall.

I have a gym power rack that I need bolting down into the concrete in my garage. 6 screws

I have ordered a gym rack and rubber flooring (to put on top of our flooring to create a home gym. I need help setting this up https://mirafit.co.uk/mirafit-m3-folding-wall-rack.html?gad_source=1&gad_campaignid=24134427009&gbraid=0AAAAADKKnjn8-JWKSbYxrD0lF7UBvXTsI&gclid=CjwKCAjwwL_UBhAjEiwAEhuT5CKIf1rfREgZb66XQPYP728iS2iRwSmqROiOqgOKKy3rFv-RZjgzDBoCLE8QAvD_BwE#446=6784&447=5439

Fixing a loose concept2 skierg

Im planning to use the garage as a gym. I would need followings to be done; 1- put together gym floor mat, the one im planning to buy is; https://www.gym-flooring.com/products/20mm-sprung-pro-gym-flooring-highest-rated-in-uk-heavy-duty 2- put together a squat rack, the one i bought already is; https://www.fitshop.co.uk/bodymax-cf475-power-rack-sebr3428 3- can put together few mirrors, the garage currently is just in bricks, so might need a power drill?

A commercial Matrix cross trainer (approx 180kg) needs breaking down in a residential home. MACHINE Matrix E5X commercial cross trainer, roughly 180kg assembled. The side shroud is already off and the console has already been removed. ACCESS Ground floor, step free. THE JOB Full disassembly, broken down as small as it will physically go without cutting. The parts stay here, you don't need to take anything away. TOOLS - PLEASE READ This is not a flat pack job. Bolts are torqued to 70 to 90 N-m and several are rusted. You'll need hex bit sockets and a breaker bar or impact driver, not just L-shaped Allen keys. Several bolts sit in deep recessed counterbores so short keys won't reach. See the photos for examples. Please only apply if you're confident you can complete the full disassembly. If you turn up without the tools to finish it, I won't be able to pay for a partial job. TIMING Fairly open on times, morning to early afternoon is best but we can discuss. I'll take the cheaper quote from someone with good reviews.

A commercial Matrix cross trainer (approx 180kg) needs breaking down in a residential home. It can't be moved as it is, so it has to be dismantled first. MACHINE Matrix E5X commercial cross trainer, roughly 180kg assembled. The side shroud is already off and the console has already been removed. ACCESS Ground floor. Step free. Free parking directly outside (if you come today Saturday or Sunday otherwise its gonna be like 5min). Roughly 1 to 2 minutes to carry parts from the machine to a vehicle. WHAT I NEED There are two options and I want a price for each: 1) Disassembly only, parts left here 2) Disassembly plus you remove and dispose of the parts yourself. Disposal is your responsibility and you must dispose of it legally. Ideally someone can do both. If I can't find that, I'll take someone who can just disassemble it. Please put both numbers in your offer, clearly separated: (a) disassembly only (b) disassembly plus removal and disposal THE JOB Full disassembly, broken down as small as it will physically go without cutting. TOOLS - PLEASE READ This is not a flat pack job. Bolts are torqued to 70 to 90 N-m and several are rusted. You'll need hex bit sockets and a breaker bar or impact driver, not just L-shaped Allen keys. Several bolts sit in deep recessed counterbores so short keys won't reach. See the photos for examples. Please only apply if you're confident you can complete the full disassembly. If you turn up without the tools to finish it, I won't be able to pay for a partial job. TIMING Needs doing before Tuesday. Fairly open on times, morning to early afternoon is best but we can discuss. I'll take the cheaper quote from someone with good reviews.

• Put a wall fan up (fan supplied) • Replace all shampoo and soap dispensers with new ones (fixtures supplied) • Touch up painting (chalkboard, wall ball targets, scratches around the studio, paint supplied) • Put blinds up (blinds supplied) • Check and tighten WaterRower fixings and equipment bolts • Change lightbulbs that are hard to reach • Use poly filler to cover dents in the walls

Mounting a pull up bar on brick wall. And some small odd jobs and furniture installation

Assembly of brand new gym equipment Marcy HG3000 - multi gym machine