Find a professional local carpenter in London Camden

Some damage on wood including scratches. We want the wooden floor all stained to achieve a renewed fresh look.

The wooden shelf located at the entrance of my flat has sustained significant damage to one of its corners due to an accidental impact with a ladder during maintenance work. The damage includes: •The corner of the shelf has been completely smashed, resulting in visible splintering and loss of integrity at the edge. •The wood surface is dented and chipped, exposing the bare wood underneath. •The original lacquer finish has been compromised in the damaged area and will need to be reapplied to whole shelf to restore a uniform appearance.

I have a couple of sheets of decorative plywood which I want to use to build a console. They have to be cut in a couple of places and joined together. Left and right sections are doors, middle section isn't moving, it's just a panel. Lids on top could be removed.

I ordered some 9mm white MDF in clearance to make a temp partition wall but they only had 18mm. It's very heavy to use and although I've done one three sided box, it still needs shaving down and putting back up. I also need the right hand side to pin one panel on the other with small L two screw brackets. I have a lot of MDF left and just need a mis-match of bits to make it private from one side to another but it's something I will take down in a few months. I could have done it but it's too heavy and precarious and I have a few ideas. I have the material, including plainer, jig-saw, which I haven't been very good with either. Basically I started it but although it's looks easy, it's all too much for me now. For someone stronger who has done this before it will be a doddle. Also I need a handle put on a door I bought for it all. I will cover it all with wall paper or plactic stuff after or you could do that too?

Build unit per photo below

Do you think this stain can be removed from the mattress? Could you also get this stain out of this cushion If so could you provide a quote for each and today for both bits of work?

I need to fix casino tables, cut some wood for I tire and fix some chairs.

The desk has a glass top and a wooden front panel and draw which needs restoring. Wood is a black, ebony stain I think, and is slightly chipped and worn on the edges. The inside of the draw also needs some cosmetic attention where it is also worn. I think it's a satin black finish on the inside with foam inserts. The draw works well mechanically. The desk width is 150cm. Depth is 60cm and hight is 73cm. The draw is 70 cm W and 6cm H and this is the part that needs the most attention . - Due date: Flexible

Wooden floor has a red stains on it made by a rug that got wet without us noticing. Affected area is approximately 20 cm x 20 cm - Due date: Flexible

trim and attach mdf/wooden mouldings to wall with screws / adhesive like shown in photo - Due date: Flexible

Two door lockable wooden cabinet needs assembling Double Door With Lock To Protect Privacy, You Can Store Personal Documents, Receipts And Bills With Peace Of Mind. ➤EASY TO ASSEMBLE: Flatpack Package, Overall Dimension: 80*45*69 CM; The Built-In Installation Guide Makes The Whole Installation Process Simple And Fast, We Also Have Detailed Installation Videos For Reference. - Due date: Flexible

The boiler cabinet was originally built as fix cabinet. I would like to open up the fix cabinet and make it a hinged cabinet door(1500x600). a simple painted white mdf cabinet door would be fine. A small portion of the skirting board (2m) need to be replaced with a thin PVC sit-on flexible skirting. Both pvc sit on flexible skirting and mdf board is available and provided for the job. Please provide the rest to get the job done. - Due date: Flexible

The boiler cabinet was originally built as fix cabinet. I would like to open up the fix cabinet and make it a hinged cabinet door(1500x600). a simple painted white mdf cabinet door would be fine. A small portion of the skirting board (2m) need to be replaced with a thin PVC sit-on flexible skirting. Both pvc sit on flexible skirting and mdf board is available and provided for the job. Please provide the rest to get the job done. - Due date: Flexible

Build a wood recessed box under the window including sil to hang the radiator on. Will supply the wood - Due date: Flexible

We are building a sauna set inside an art space in central London. We need someone who can help us to build 5 sets of timber sauna benches. The person should know carpentry as might need to source some extra timber to support the seats due to the uneven floor. Working time will be day times between 10am to 6pm on 18th May. With a potential of supporting us on 19th May as well. Price is negotiable if an extra day is needed. - Due date: Needs to be done on Wednesday, 18 May 2022

My landlord has asked me to find a carpenter to re-hang the door to my lounge as it doesn’t close properly. I also need foam insulation added to the door frames on 3 doors as bad drafts coming in. Will need to send quote to landlord for approval before agreeing so please ignore the cost of the job I have put up

Small job just cutting down and chizzling a piece of wood by a centimetre

Looking to build a photo backdrop for home use. The backdrop will be made of a single 1.2x1.2m MDF sheet. I need wallpaper to be fitted on the sheet, followed by a few screws and hangers being fitted. Wallpaper, wallpaper paste and MDF sheet will be provided