Find a professional local carpenter in Central London

Modify walnut veneer drawer unit into concealed pull-out desk. I have an existing walnut veneer drawer unit (part of a wall-mounted shelving system) that I’d like converted into a concealed pull-out desk. Scope: • Remove internal drawer components • Install heavy-duty full-extension runners • Build and reinforce a pull-out desk platform using existing matching walnut shelves • Reattach original drawer front so it sits flush when closed • Ensure smooth glide and solid feel when extended • No visible fixings from front Important: • Must be level with a clean, seamless finish • Structurally solid (no wobble when typing) • Experience with cabinetry / bespoke

Replacing 4 internal doors and frames. make adjustments to build in wardrobe

I'm replacing the hinges, I have done some of them. Some of them are a little fiddly as the person who installed them originally put wall plugs in some of the holes. The new hinges are compatible with the existing system, though. I want the cabinet doors repainted, and the handles replaced. The previous handles required 2 holes, whereas the new ones only need one. I've used wood filler to fill one of the holes and sanded it down so they're ready to prime/ paint. Some of the doors have been primed, I'll aim to get as many done as I can so that's not a blocker, although I'm running low on specific primer I'm using. I'm not sure if any primer would be fine. I've lightly sanded the doors before priming, but it may need to be redone (if that's the case the price will obviously go up). I also want to install a 'lip' around the bottom edge of some of the cabinets. I've pre-cut the MDF to the exact size, and partially primed the MDF. This is for hiding LED lighting that I'm going to install myself.

We are looking for a highly experienced carpenter/joiner to subcontract a bespoke retail shop fit-out project. This is not a basic shelving job — we require someone confident in high-end finish carpentry and detailed joinery work. Scope of works includes: • Full-height bespoke arched wall units • Oak veneer finish throughout • Integrated LED lighting • Arched pegboard display panels • Precision shelving (approx. 18” depth) • Built-in cabinetry and fridge housing section • Clean, seamless shop-floor finish to a high commercial standard The design features multiple large arch details, symmetry across a 30ft wall span, and a premium aesthetic. Accuracy, clean lines, and finish quality are critical. This will be subcontracted through my company, so you must be: • Fully self-sufficient • Own tools & transport • Experienced in high-end joinery • Able to interpret detailed drawings • Reliable and deadline-focused Important: Please only apply if you have experience in similar bespoke retail, hospitality, or high-end residential fit-outs. When responding, please include: • Photos of previous arched joinery or similar bespoke installations • Examples of oak veneer or high-end finished projects • Confirmation of availability • Day rate or project Location: London - exact location to be confirmed Start date: ASAP Serious professionals only — quality is the priority.

Build and install a sliding white shelf in a kitchen cabinet. Requires a shelf and sliding rails to be installed like the attached picture. The overall shelf width is 74 x 17cm that is required. Would like to have a sliding white shelf for a microwave (width 46cm) and rice cooker (26cm). The second picture numbers is the current state of the cabinet. Due to the weight would require a heavy weight rail and a thick shelf. Need a hole to drilled into the corner worktop which is about 6cm thick real wood so the cables can fall through too. Would like to find out the approximate cost for this job.

Old handymen hung my cabinets back up and they arent aligned and they used to be perfectly. Butt hinges and none adjustable

Front door has difficulty closing due to weather conditions, needs planing & sandng

Carpenter needed! Ideally with contracts with fitted kitchen suppliers like magnets and Wren etc. Why: I have an integrated fridge freezer but the fitted kitchen doors don’t fit properly. The previous owner created a single door that opened the entire fridge freezer at once which is bad for the fridge efficiency/lifespan. The job: I need one door for the freezer, one door for the fridge, and then one door to cover some mains/plugs/switches above the fridge. The doors need to match the rest of the kitchen as much as possible.

Building L shape kitchen breakfast bar. Build banquette seating. Replace radiator to smaller radiator Labour only.

Task Description: I need an experienced handyman to install a Wesco Bio Double 64L 2-Compartment Recycler into an existing kitchen cabinet. There is an existing bin system of the same model that is broken and needs to be removed for installation to take place. The bin system is designed for a 400mm pull-out door. This will require mounting the runner system to the base of the cabinet and attaching the cabinet door front to the bin mechanism so that the bin pulls out when the door is opened. Details: • Model: Wesco Bio Double 64L (SKU: 785464-85). • Cabinet Size: 400mm. • Tasker Requirements: Please bring your own drill, screwdriver set, and measuring tape. Experience with kitchen cabinetry or integrated bin systems is highly preferred to ensure the door is perfectly aligned.

No idea on a realistic budget for this so just added the minimum price - We have 2 ikea cabinets which we want to box in so that they appear to be built in, and then add floating shelves above this. Probably a total of 7 shelves. Included an AI mock up for reference.

Hi there, I need my garden fence sanded to remove the brown stain from it. So it’s 150 fence pieces that are 15cm x 175cm each and back fence 120cm x 7m. Thanks!

Dismantle ikea unit Cut down to build into gap - approx 35cm from the 50mm unit and build into shelves Ikea units all repurchased to use just need to cut and build in. Need to cut around plug sockets so these are still accessible. Build in unit at the top to appear more built in.

Bought a 200cm long kitchen cabinet that I would like to put up onto the wall .i have all the parts and screws

9am - 2:45pm preferred, but can extend work day as required. Fit shelves in cupboard, wood provided. Fit shelves in additional cupboard, wood provided. Fit shelving about kitchen cabinet, wood provided. Fit toilet seat. Hang small holder tray in WC Remove old painter tape from multiple windows. Tighten legs on kitchen table. Paint kitchen table, paint on site. Additional 1 or 2 tasks may arise.

we want to put a dishwasher in - there is currently no space and we just need some small changes to be made to the kitchen cupboards so that a dishwasher can be put in instead

We are looking for a highly experienced carpenter installer to help our team complete a joinery project in a small house. The ideal candidate must have excellent hands-on experience installing cabinet carcasses and cabinet doors, with strong attention to detail and the ability to work efficiently as part of a team. This is a short-term project in a private home, lasting a maximum of 3 days. We are seeking a reliable, professional, and self-sufficient installer who takes pride in high-quality workmanship. Immediate availability is an asset.

Repair and decorate 1 sash window (6ft x 4ft). Internal needs sanding and repainting and the sill needs filling/repair as shown in photos. Would also like the masonry sill to be painted and the walls of the window frame on the outside/reveals to be sanded/filled and repainted. First floor flat in a Victorian conversion. No access externally so work needs to be performed from inside.

I need someone to block the holes on the floor area under the stairs shown in the photo. The holes need to be covered neatly and the plywood should not be higher than the existing floor I outside of the area or the concrete inside the area. This is just prep work for understairs storage that will be fitted in a few weeks.

I have a wood pole that needs to be propped up from underneath. Or a piece of wood on the top. I’m looking for a quick temporary solution. Needs to be done by tomorrow 5pm Thanks