Hire a reliable appliance service in Kingston Upon Thames

Bosch Washing Machine - Clean the washing machine thoroughly. Check the filter, detergent drawer, seal, and hose connections. Make sure it is draining and operating properly. Advise if anything looks damaged, blocked, or incorrectly fitted. Type of clean: End of lease Number of bedrooms: None Number of bathrooms: None Equipment and supplies: Tasker must provide

Tumble dryer tripping the fuse on and off. Also need PAT test.

The hoover turns on and then the power pulses 5 times before going off.

I have a Neff dishwasher which needs fixing, The water just flows in at rapid speed every 5-10 minutes and nothing happens, There is no heating as well and I suspect issue withthe heat pump, Even after 2-3 hours none of the vessels get cleaned up and water gets clogged up in the bottom, This may need parts replacement and I want some one to assist me in fixing this up Also need to check if the pump works properly to clean as the water gets clogged up in the bottom

I have a washing machine that I need help to install.

There is power to the oven, but when it reaches a certain heat, it trips out. I replaced the oven but it still happens, so the oven guy said it was a problem with the socket.

I need to re install part of the boundary wire for a robot lawnmower. it should take about 2 hours to do. I have parts and material Type of gardening: Other Size of garden: 150m²-300m² Has green waste bin: No

Walking back is cracking after 5 mins of use

I have a replacement door seal for my washing machine but I am having trouble fitting it myself. I need someone who has done this before to come and fit it

Hotpoint washing machine locked with clothes in. I think the pump is blocked.

Hi I have a Cobra petrol lawnmower that won't start. It was working last year and I've put in new petrol and oil but it won't spark.

Water doesn't come out of the group head

Vacuum cleaner not working

The curved treadmill is not working properly. The belt feels like it is on a very high resistance. It is turning but with a lot of effort

Hi, I have a Sage Barista Express. It seems to have an issue with the internal group head screws. I had this problem 2-3 years ago. Water is splashing from the side. Shower tray is fairly new and I recently replaced the seal and also cleaned the group head internal areas thoroughly. We live in Kingston upon Thames. Could you kindly quote for a visit and the tightening of these screws? Thanks, Sven

Coffee machine: De’Longhi Magnifica EVO (ECAM series) Age: approx. 3 years Problem description The coffee machine has developed multiple internal water leaks. Water mixed with coffee residues is accumulating inside the machine and in the coffee grounds container, which should normally remain almost dry. There are visible water traces and leakage marks under and around the brew unit, indicating that water is not being correctly channelled to the drip tray and is instead leaking inside the machine. The issue appeared gradually and has become worse over time. Observed symptoms Water and coffee sludge collecting in the used coffee grounds container Water leaking inside the machine body Moisture and residue around the brew unit area No external leaks from the water tank itself Suspected causes Based on the symptoms, the most likely causes are: Worn or hardened seals (O-rings) on the brew unit piston Possible leakage from the drain valve / upper piston assembly Potential deterioration or loose connection of internal silicone hoses Given the age of the machine, seal degradation is considered the primary cause.

Installation of induction hob

I need someone to connect a washing machine for me.

Ok, last time it was a hit water pipe with a little hole and release steam which destroyed the electrical. I hope we catch it earlier this time as I had no error message yet

Gas meter screw broken - to fix or need Edf to fix? Need gas certificate