Find a professional local carpenter in Central London

Fitted corner cupboard, needs disassembling to fit slim dishwasher, dishwasher needs plumbing in and hole drilled through cabinet to fit plug.

1) My stairs have been stripped to bare wood and as it's creaky, a few steps needs to be nailed/fixed to eliminate the noise – there are 13 steps in total. 2) I would like to see if it's possible to sand the steps to natural wood and have a runner put in (leftover grey carpet) so this work requires an experienced specialist. 3) Also, I need the stair hand rail installed, the kit is already delivered to the property.

Looking for a builder/joiner to install a custom half-height external door to enclose an under-stairs recessed area outside my property. The door would: * Be fitted between two masonry walls * Sit at the front of the recess under exterior stairs * Be outward opening * Matte black finish preferred * Weather-resistant and suitable for outdoor use I’m open to composite, timber or steel depending on recommendation and price. Would ideally like someone who can measure, supply and install. Please message me if interested or if you can recommend someone experienced with custom exterior doors/joinery work.

We need to make the cooker hood canopy (115cm wide) and arched wall cabinet (just the top part) 130cm wide in kitchen alcove. Both marked with green highlighter in photos

Need to lay out a wallpaper in a small bathroom. Two sections: a slanted wall and a slanted piece of joinery with doors etc. 200cm in width total. See pictures.

I recently had some shelves, cabinets and a faux fireplace made from MDF. I just need a few small tweaks to the job like reattaching a plug socket to the wall (hole is too big behind the plug) , and creating a back panel for the fireplace

I would like to hire a carpenter/joiner to build the wooden base for this seating. There will be a radiator housed under it so it needs gaps/slits to let the heat through. I want the base to look like in the photo. Rough dimensions are in the photo. Price would need to include materials.

Experienced and excellent Joiner, Carpenter required for High End finish of 4 wardrobes, 1 book shelf, 1 shoe rack. # Min 20 years experience # Refs and portfolios required Strictly no time wasters Top money for the right person

Veneer application to spiral staircase wall (curved MDF substrate already fitted). Area approx 10–12 m². MDF is smooth(ish) but needs further smoothing/filling and edge prep. Require seamless professional finish with joins kept minimal/hidden. Veneer to be stained after application. Veneer provided by me. This is a job for someone that enjoys intricate work.

Replacing 4 internal doors and frames. make adjustments to build in wardrobe

Building L shape kitchen breakfast bar. Build banquette seating. Replace radiator to smaller radiator Labour only.

Hi, I’m looking for an experienced joiner/carpenter to help with 3 internal doors in my flat in SE1. Details: • 1 × bedroom door • 2 × storage cupboard doors • The existing doors have been removed • The openings are non-standard sizes What I need initially: • A site visit to accurately measure all openings (top/middle/bottom) • Advice on door sizes & clearances • A quote for supply + fitting of plain internal doors • No obligation to proceed after measuring Important: • Looking for someone with experience fitting internal doors (not general handyman only) • Please confirm if you charge a call-out fee • Photos/examples of similar door work appreciated This task is for measurement + quote first, with fitting to follow if we agree on price. Thanks!

Joiner to fit an IKEA PAX wardrobe for a seamless built-in look. Tasks: assemble, level on 60–100mm plinth, fix to wall, tie units, add MDF side scribes and top infill (continue coving if needed), notch/refit skirting, hang/adjust doors, make good (fill/caulk/sand/prime), remove packaging/waste.

I would like to request a quotation for a small joinery job in my kitchen in NW2, London. I have a tall cabinet where the fridge is built in, and I’m replacing the fridge with a new one that is 20 cm taller. I would like to keep the overall kitchen height exactly the same, but shorten the cabinet above the fridge by 20 cm so that the new fridge fits properly. The job would include: • Removing the top cabinet door and cutting down the cabinet height by 20 cm; • Adjusting the internal shelf and back panel accordingly; • Cutting and refitting the same cabinet door to match the new height; • Refinishing the cut edges to match the existing wood veneer. Please could you send me a quotation (including labour and materials) and let me know your earliest availability for a site visit? Thank you very much, Raquel

We need a joiner to help us put custom fronts on our Ikea kitchen and to create a base for the Besta cabinet so we can use it as a bench.

Joiner to resize and fit 4 internal pine doors. Tasks include resizing, hinging and fitting door lock. Own tools will be required

Looking for a joiner to install banquette seating in kitchen corner, and remove existing breakfast bar. Also to install shelving in living room alcoves. Small residential project but may be more scope for future projects as I am an interior designer. Please see my profile for further details. Please quote below or contact me. Thank you!

Need a really make shift garage door that can be disposed of in a few weeks but needs. To be able to open close and have a padlock on

Bench area needs tiling. BBQ area needs sliding doors.

Joiner / kitchen fitter to join kitchen worktop together One simple end to end butt joint only No cutting required