Find a professional local carpenter in North London

Local handyman needed to prep and stain/varnish wooden climbing frame – North London. It’s a Backyard Discovery Lakewood wooden swing set / climbing frame which was assembled a few months ago. It now needs to be properly treated with a cedar-coloured outdoor wood stain / protector (I have the protector already). The job will need to be done over 2–3 weekday visits to allow for prep, drying time and coats, and will need to be scheduled during a run of dry weather. Visit 1 – Prep: Wash down / clean the frame with warm soapy water and a stiff brush; Rinse and allow to dry; Light sanding in key areas (handholds, ladder areas, corners etc.); Wipe away dust; Cover / protect slide and swings before staining. Visit 2 – First coat: Apply first coat of cedar wood stain / protector evenly across the frame. Visit 3 – Second coat / finishing: Apply second coat if needed / final coat for protection. Important notes: - It needs to be done during the week if possible so we can work around our son using it. - Ideally someone local who can be flexible around the weather and come back for short follow-up visits. - I have brushes and the wood stain/ protector, but please bring your own sanding materials / dust sheets / prep materials. Timing: Flexible, but ideally on weekday mornings / daytime during a spell of dry weather over the next couple of weeks. Budget: £75–£100 total..Likely only around 1–2 hours per visit over 2–3 visits

I have lots of decking and one garden fence section (see photos) that I need to have cut into pieces small enough to fit in a wood burner. Probably needs a chainsaw to get through it quickly as could then possibly cut through multiple pieces with each cut. Ill be there to help pass the wood ready to be cut and remove and stack into the wood shed (also shown). It will be necessary to gradually bring in the wood onto the patio for cutting but I can be doing this. If you need any more photos of the work area then please let me know.

I am looking for a handyman or carpenter to repair and reinforce a wooden shed doors. The doors are currently have a large gap between them. The structure itself is still in place, and I already have 3 OSB boards on site that can be used to strengthen and reinforce the doors.

Looking for a no nonsense, no fuss carpenter/handyman for roughly a days work in N17. Plane and fix hinge on 2 interior doors, fit a dishwasher panel, replace a bit of plinth, and a couple of other small bits and pieces. All materials provided.

The toe-kick/base trim board at the bottom of my kitchen cabinets has come off and is sagging/pulling away from the cabinet base. I need someone to inspect it, and replace any damaged fasteners. See attached image

The store door is on a slope and is a bespoke size approx 1.3 x 1m. We would like it to be weatherproofed and painted. We will supply ironmongery and paint.

Cabinet has spring loaded horizontal door 80 cm x 40 cm. Door is heavy and has come loose from housing

Multiple basic carpentry tasks (hanging a new internal door, fitting a door lock, hammering down old floorboards, fixing entry hall) - ideally after a carpenter whose willing to offer a day rate and up for more future work

I have all the parts, and tools. It’s all ready to be built

I require some one to install folding wooden doors to fit between conservatory and kitchen diner. I will order the items needed with advise from trades person on measurements and materials etc. Labour cost required.

Carpenter required to assemble Ikea, drawer and tv stand put up 3 shelf and mirror

We are looking to have a dishwasher fitted into kitchen that currently has no space for it. Need woodwork to create space in cupboard under the sink

I need an underneath wood cabinet cut to fit underneath my sink - it’s a little bit too big Open to accept offers and different prices

Jet washing and staining decking. Approx 12m sq

Gloss woodwork along bannisters on 2 stairwells

Replacing the existing 2 tall kitchen cabinets with new ones already assembled. This will require also taking out and back the integrated fridge, secure the new cabinets, fix and adjust the doors by making sure everything is level. You’ll also have to fix on both side the end panels.

We have 4 panels of wood that need to be cut with a power saw Not sure how much of a job this is so open to offers!

Need to fix bed frame. Multiple supports chipped away from nails.

Got to build a cabinet around electric meters that will follow council requirements attached

No idea on a realistic budget for this so just added the minimum price - We have 2 ikea cabinets which we want to box in so that they appear to be built in, and then add floating shelves above this. Probably a total of 7 shelves. Included an AI mock up for reference.