Find experienced local tradies in Bronte NSW

Looking for a quote/complete some plasterboard and plastering work in a few areas of the house. Mix of large/medium/small fixes: 1. Under the stairs - replacement board 2. On the stairs - replacement board where the damage section is 3. Small areas of kitchen - 2 floor level areas with damage 4. Remove the airing cupboard in bedroom/hallway and add replacement boards to make wall flush 5. Ceiling - small section damage

Need to recover / plaster over a curtain bracket that was pulled down and so has ripped

Hi, I need a reliable handyman or plasterer to fix a some damage to my interior drywall. 3 Locations: 10x10cm, 15x5cm, 2x2cm. I've attached images. We have matching paint. Location: Read St, Bronte, NSW. We have easy parking in our garage onRead Ln. Please let me know your price for the job and how you'd plan on fixing. Thanks!

dismantle an outdoor 4 barrel person sauna plus two ikea single beds to load into storage unit out front of house

Recently removed a built in laundry with very tough tiles to remove and we need to fix the render that got taken off the wall before we repaint it. Wall is 1600 x 2200. Plumber is coming to cap off pipes on Friday 3/7, so welcome to come anytime after that.

I'm looking to see if someone can render this concrete BBQ Plinth to match a planter. It looks like its some kind of limewash or something. Im not sure.

Need to repair render on front of house and fill in hole inside/brick plus render

I need a confident handyperson to hang a Rachel Donath Dora Gloss Mirror — a premium fibreglass mirror (70cm × 95cm, 17kg) — on an internal pebbledash render wall. The mirror uses a French cleat hanging system (wall cleat + mirror cleat). The wall cleat needs to be fixed securely into the masonry behind the render. 📦 WHAT’S SUPPLIED: • The mirror (already delivered, in box) • French cleat bracket (included with mirror) • Screws (included with mirror) 🛒 PARTS TO PURCHASE (reimbursed on receipt): Before arriving, please pick up from Bunnings Rozelle (Mullens St, Rozelle): • 4 × M8 heavy-duty masonry anchors (Fischer FUR M8 or Ramset Dynabolt M8) • Estimated cost: ~$20–25 (fully reimbursed) 🔧 TOOLS REQUIRED (please bring your own): • Hammer drill with masonry bit • Spirit level • Screwdriver • Measuring tape • Cable/pipe detector ⚠️ WALL NOTES: The wall is pebbledash render over brick. Anchors must drill through the render and at least 50mm into the brick behind. Standard plastic plugs are NOT suitable — this is why we need the upgraded anchors above. ✅ JOB IS COMPLETE WHEN: • Wall cleat is fixed level and securely into the masonry • Mirror is hung and stable • No cracking or damage to the surrounding render 📬 Please include in your offer: • Your experience with masonry/render walls • Whether you have all tools listed above • Your total price (labour + parts reimbursement)

I need to wire a power point in the up stairs of my loft apartment. Cables already ran, just need a multimeter. Easy job.

I need a qualified electrician to supply and fit 5 double power points to spots around 4 walls from existing power points. New power points to be surface mounted (screwed into brickwork), connected by 2.5 mm twin and earth cable installed in surface mounted 25mm X 15mm ducting double sided taped to wall. Approx. ducting length = 20 L Meters. I need a certificate for an existing smoke alarm also.

I removed timber cladding on an exterior wall and it left gouges from the glue. I tried to repair it myself but cocked it up. Need someone to render it properly. It’s about 1 sqm.

The roof of my apartment has a textured roof as seen in the two pictures below. I want to change this to a simple flat/smooth ceiling as is more common. I need a plasterer to do this job. The apartment is a tiny studio and the roof that needs changing is about 16m squared.

The plastic ring hook on my crank operated awning broke. Looking for help to source a replacement and fix it.

Need a plasterer to skim coat ceiling in a 30 sqm studio apartment. It currently has a pattern which we want to make flat. Price includes material. We are looking for a professional and who will keep the place clean and not leave a mess behind.

Functional painting of external wooden balustrade with two (2) coats of exterior white acrylic paint (which you will provide). Currently primed but a little dirty as you can see from photos which might require a little prep. No rotten sections or repairs required. Note there is a left section and a right section as shown respectively in each photo.

we have removed a portion of a wall and need the edge rendered, height approx 2.7m and edge is one brick thick. need done asap

Motorised retractable awning not working and stuck in half way out position.

I have purchased a Revel 4 person sauna, need someone to put together, pref with experience. It’s flat packed with instructions

I need a small hole in a door plastered & painted. I don’t have any pain unfortunately.

Minor repair to hole in wall