Find an experienced flooring expert in Sydney

remove old carpet and install new Vinal flooring to 4150x 3100 aria

Hi! I need someone to remove my current vinyl flooring in my studio kitchen (about 5sqm) I then want it replaced with another vinyl flooring (Karndean Opus Stone Terra) I will supply the vinyl. Just need removal of current vinyl and installation. Floor might need some levelling. Looking to have this done well please! All offers considered :)

Need decking installed over 25-25sqm in my backyard. The tiles and pavers have been pulled up. Flexible with materials, ideally something not too high.

PVC sheet laying for the whole room with carpet, it’s rental property so I can’t remove the carpet, so install the PVC sheet on top of the carpet to become waterproof.

Looking for a flooring professional to: * Remove & dispose of existing carpet in two rooms (photos attached) of an empty unfurnished apartment (total area approx. 27sqm) * Prepare subfloor as required * Supply and install appropriate acoustic underlay * Source and install hybrid wood flooring * Install trims/scotia as needed for a clean finish
 * Ensure installation meets standard NSW requirements & give me proof ideally Site Details: * Located by Waterloo Metro * Ground floor apartment * Flat easy access * No dedicated parking spot, but street parking available nearby * Two rooms to do (total approx 27sqm) * Existing flooring: Carpet
 Please include in your offer: * Confirmation you can provide certification of the NSW standards met * Estimated timeframe to complete Thanks in advance!

I need a carpenter / joiner or flooring installer to lay around 30sqm of used floorboards on top of this plywood floor. The floorboards are used tongue and groove hardwood floorboards of varying lengths. The floorboards don’t need to be fixed to the floor as long as they stay in place and don’t move around when you walk on them.

Need someone with experience with installing hybrid laminate floor in my kitchen. It’s a small area and already prepared. I have all the materials boards and trims. So need just installation. Can do this weekend or Monday

Have a small studio in Glebe currently has carpet. I would like to remove carpet and install hybrid timber floorboards. The area is only 20-21sqm. Open to offers or recommendations to do the entire supply, remove carpet and install or simply consult. Estimated total cost or budget would be around $1500

We have to replace existing joists on our balcony. We need 9 x 288 cm and 5 x 228 cm / H4 treated pine joists Preferably 45 mm x 45 mm

Install laminate flooring in house. Laminate flooring will be provided Floor size area approx: 115m2

The task is simple and requires somone who has installed a herringbone finish ( hybrid timber floor) my current contractor pulled out for a medical reason and my team are bumping in early next week. The floor material is to be collected from a warehouse in Wetherill park 90sqm worth of material + 100sqm of roll & some transition strips The scope is to remove and dispose of existing rubber floor Prep the slab - no self leveling required as the floor is in good condition Lay the new floor in a herringbone pattern Internal it is a total of 76 sqm and I have ordered 91sqm allowing for wastage - you can work nights and day to get the job done with no limits - access is straight forward I’ve included a vision for the new office Please ask any questions you may have PS- the current floor is a 5mm rubber the new floor is 5.5mm - it will fit under the existing aluminium skirting

Need floating floor installed to continue through the house, about 16m2. Boards are there.

I’m seeking an experienced and qualified flooring tradie to remove existing carpet and install vinyl flooring in a studio apartment (total area: 27 sqm). Scope of Work: • Remove and dispose of existing carpet • Prepare and level the subfloor as required • Supply and install all necessary materials excluding the vinyl flooring planks (vinyl will be provided) • Install new skirting/trim (or refit existing if suitable) • Include appropriate underlay (if required), adhesives, finishing trims, and transition strips • Ensure a clean, professional finish consistent with the example photos provided Photos of the studio and a reference example of the desired final result are attached. Requirements: • Proven experience installing vinyl flooring • Own tools and equipment • Ability to complete the job to a high professional standard • Please provide a quote including labour and all materials (excluding vinyl planks)

Install client supplied hardwood timber flooring to Bedroom 3 (approx. 8m2). Sand and seal timber flooring to 3 bedrooms, stairs, liviing and hallway. Approx. 70m2 See attached plans Here are 3D walkthroughs of the existing property: https://astonconsult.com.au/n-jhojxee7sz4/ https://astonconsult.com.au/n-2sgpfguzsjg/

We have a small room. 10 square metres. Needs someone to lay some basic laminate flooring. Materials supplied. May require some cutting ect it’s a small squarish room about 3.1m x 3.4m in a music studio. Hoping to get this done tomorrow if possible. The space is currently empty. The picture attached is just for reference.

Hi everyone, I’m looking for a skilled installer to lay laminate wood flooring in my recently renovated kitchen. The area is approx. 7sqm and the subfloor is concrete. I will supply all the materials The job includes: • Preparing the area • Laying the laminate planks • Installing trim/beading for a clean finish • Ensuring neat cuts around cabinets and appliances Looking for someone with experience in laminate installs. Thanks!

Install vinyl on left and right side of the fridge everything will be included

Need to get floorboard installed in the covered balcony 4.4 * 2.4 mtrs Material all available

Looking for a handyman to cut and lay around 10 floorboards in an area below an old kitchen cabinet (fridge will now go above this area). Spare floorboards are supplied. It is not the full area in the photo - about 940mm x 700mm. Also supply and install about 2.5m of 20mmx140mm skirting. No need to paint - just install. Job is in Marrickville, hoping to have this done in the next day or two.

80m2 of hybrid flooring to lay Do as much as you can in one day I don’t have photo Single storey house Lay straight on the ground

Small office in Sydney CBD with four meeting rooms and an open area. Task is to clean and polish aluminium skirting boards around the office. Steps: • Clean metal skirting • Remove marks or residue • Polish, wax and buff Products will be supplied. Needs to be completed before 5pm Sunday. Easy access office building with lift.

Looking for quotes for sanding and polishing timber floors with a water based clear finish Two bedrooms, narrow hallway and living area totaling 50 square meters

floor scrubbing, concrete floors at a commercial site in Alexandria, 800sqm

Floor sanding and polishing to a natural matte finish: -65m2 -Can be present at site on 26, 27 Feb to provide inspection -Old carpet strips will be removed. May need to remove some old staples from previous carpet. -Broken floor boards will be replaced by others. -You can start earlier to prep (while painting is being completed). Need to move-in on 7th March Please send through previous work photos.

Wanting to get my kitchen benchtop polished and resealed

Sand and polish my floors. The kitchen and living room built in cabinets will be removed as part of kitchen reno. The floors must be done between the strip out and installation. This will happen in next 5 to 7 weeks, dated TBC. Floor layout requiring sand and polish is marked in brown in the attached image. Floors of the bedrooms are floating hardwood and are cracking, if possible cracking should be fixed. Bedrooms do not require sand and polish.

We’re looking for an experienced timber floor professional to rejuvenate (oil polish) our hardwax-oil timber floors — no sanding. Details: • Engineered European oak parquet (Tongue & Groove – Raba) • Finish: WOCA Hardwax Oil • Area: ~28 sqm (living room + kitchen, open plan) We already have the WOCA products (Intensive Cleaner + Maintenance Oil). We’re looking for someone with the correct polishing/buffing machine (rotary) and experience with hardwax oil floors to do the clean + oil rejuvenation properly. Please let me know your experience with hardwax oil floors, the machine you use, and your quote.

Had some scratches patched on a black wooden floor. But when dried has left these unattractive marks on floor from previous handyman. These need to be polished to leave a better result. About 4 spots. The pic is of the largest one. Approx 60cm long. Must be done on a Thursday please.

Potts point studio apartment (25sqm) has old pine flooring that hasn’t been touched in 20+ years. Looking to have the floor restored, sanded and polished. Date flexible Thank you!

timber floor area is about 35 sqm (living-dining area and study), it's currently quite dark and I would like to make it as light as possible (but not whitewash) and have matte finish

Sand and polish timber floor(28sqm), plus 13 stairs(no landing and I will remove all carpets)

Looking at someone to come and repolish the wooden floor in our hotel lobby. Looking at removing some floor marks and make the wood shiny again with a good professional clean.

Please provide quotation (per Sq Meter), thank you Sand, stain, polish (water damaged), kempas floating hardwood flooring. Room size approx. 2.5 x 4m

Floorboards sanded and polished

Clean and polish decking: Remove and stack sections of timber decking (deck is approx 2.5x4m) Clean /gurney white tiles underneath timber decking Seal up any holes on each side of deck floor Replace timber decking Gurney clean top of timber decking Mend any broken timber slats Polish timber decking Could be done over two half days work to allow decking to dry before polishing on second day. (Provide own gurney, tools to repair some of the timber slats that have come off, sealant to fill holes, and tools to polish the timber decking (polish will be provided)

Please level and then give this floor a polished concrete finish. It is approximately 15 square metres.

Polish my garage floor. New concrete slab was poured 2 months ago. Burnished and smooth. 29 square meters total.

Floor boards need polishing

Sand and polish existing wooden floor. Floor colour to be as light as possible

Floor sanding and polish

Recently removed carpet from hardwood floor which needs to be refinished. Two bedrooms (10.5 sqm each) plus hallway (~3 sqm). Will add photos shortly!