Find an experienced flooring expert in Marrickville South

Hi everyone, I'm looking for someone to manufacture and install a custom timber floor in my **2020 Suzuki Every** in **Marrickville, Sydney**, and would love to get a quote. **Requirements:** * Custom-made timber floor. * Waterproofed/sealed for durability. * Installation completed over a **weekend**. * Floor to be made in **two sections**, connected by a heavy-duty hinge. * One section must lift to provide access to the storage area underneath, while the other section remains securely fixed to the van. * **Four heavy-duty D-rings** securely mounted to the floor as tie-down points. I've attached: * Photos of my **2020 Suzuki Every**. * Example photos showing the style and functionality I'm after. The work will need to be carried out in **Marrickville, NSW**, or I'm happy to bring the van to a nearby workshop if preferred. If you're experienced in van fit-outs, camper conversions, or custom cabinetry and are interested in the job, please send me a message with your availability, experience, and an approximate quote. Thanks in advance!

Hi mate, I have a client asking for floor sanding and polishing. They’re hoping to start around the end of next week, beginning of the week after. Access for inspection/quote can be arranged from July 2 through someone who has the keys. Can you please let me know if you may have availability around that time, and what info you need from me for a quote? The total area approximate 50 sq.m. Thanks, Alex

Need to replace a section of heavily damaged carpet within my wardrobe. Size is roughly 1m x -0.55m Do not have a replacement carpet. Would need to be supplied, as close to the 2nd picture as possible.

I need these boards cut in half - no removal no additional work. Just down the middle doesn’t need to be perfect.

Remove and replace vinyl floorboards 100sqm salon Quotes to remove and install And quotes to remove and install and supply please

Install approx 6 Lineal Metres of skirting board in small kitchen & laundry. Skirting already purchased.

Small crack/chip in a single floorboard. Looking for a minor repair only (fill and colour match), not replacement. Just need a quote or someone who can complete the repair.

There is a small burn around 3-4cm square of the carpet. Need a quote to fix it, not sure if it can be a square cut out and replaced or if it needs to be relaid? I look forward reply Have put $10 minimum as payment can be sorted on the day

My outside deck is really warped and hasn't been oiled in a few years. It needs a refresh before the wet and cold winter comes. The last two winters it has swollen up causing water to pool on top of it. It will need cleaning, sanding (if you think appropriate) and finishing/oiling. I'm open to other suggestions on what you think might work. The work should be undertaken on a hot sunny day to make sure everything dries quickly. I will reimburse you for any materials (e.g. deck cleaner and decking oil) but not equipment. The deck is around 40-60sqm.

Must be able to provide material They are from Bunnings and are the glued vinyl floor planks. Just want to replace the ones that have lifted in the photo.

Looking for someone to install around 6 m^2 of flooring. Around 6 rubber tiles and 1x1x0.1m at our Killa boxing gym in Marrickville nsw 2204. We have around 4-5 tiles that are under the boxing ring but might need 2-3 more for installation. We want them glued to the concrete floor if necessary. I need an aluminium step around the water bubbler to avoid spills damaging the rubber flooring. Price includes any extra tiles required if you can supply, Aluminium step around 3m long if necessary and glue

Looking for a handyman to repair a small section of glued vinyl plank flooring A few planks have lifted, separated and need spot replacing. I’m looking for someone who has experience with vinyl plank floor repairs Happy to purchase the material from Bunnings .

40 square metres of tiling and underlay

Sand existing finish and oil merbau decking boards on fence. Approximately 30m2 of timber. Oil supplied. Will require belt sander and orbital/finishing sander, oil applicator (Lambswool Applicator/Pad, Soft-Haired Decking Brush for edges, corners, and getting between the decking boards).

Looking for a handyman to cut and lay around 10 floorboards in an area below an old kitchen cabinet (fridge will now go above this area). Spare floorboards are supplied. It is not the full area in the photo - about 940mm x 700mm. Also supply and install about 2.5m of 20mmx140mm skirting. No need to paint - just install. Job is in Marrickville, hoping to have this done in the next day or two.

Vinyl Flooring Removal & Installation We’re looking for an experienced person to remove existing vinyl flooring and install new vinyl flooring (already purchased and onsite). Details: Area size: 165 cm x 173 cm Old vinyl to be removed and disposed of New vinyl to be installed Installer to supply adhesive/glue Timing: Today after 6pm Tomorrow after 4:00 pm

The carpet boards have come up. it is a small apartment. theywere stapled in.

Carpoet boards peel up. Stables previously holding it in place are dangerous and have come out.

I need approx. 10sqm of cheap floating floorboards replaced • Boards are from Bunnings (laminate/hybrid click-lock style) • Job involves removing the old boards and relaying new ones. • Subfloor is in good condition. • I can purchase the new boards from Bunnings, or happy for you to supply if easier. • Need clean removal, neat installation, and skirting/trim refitted if required.

Hi there, I'm looking to get my lino kitchen floor sealed. I need to get it sealed because it's old lino and there are a few cracks/ small broken pieces in some places. And my 16-year-old dog sometimes has "accidents" in the kitchen and though we mop the floor and disinfect, I worry that the floor seems to be unsealed and water etc is getting into the cracks/between the lino squares. The kitchen is small - approx 2x3m. Further, the bench, stove etc will mean the area that actually needs sealing is smaller. I know I could just buy floor sealer and try to DIY, but want this to be done professionally to make sure the finished look is un-noticeable. Would also like your professional advice/opinion on whether it would be possible to seal around the fridge/furniture used as pantry etc or would this look too bad when the furniture is eventually moved out?