Find an experienced flooring expert in Sydney Northern Beaches

Looking for a licensed and experienced flooring specialist to supply and install luxury vinyl planks across approx. 60 sqm, covering the kitchen, lounge, and hallway. Scope of Work:Supply: Provide quality luxury vinyl planks (modern wood look/neutral tone) and necessary underlay/adhesive.Preparation: Minor subfloor preparation to ensure a flat, clean surface.Installation: Installation of vinyl planks, including scotia/skirting if required.Site Clean: Must be licensed and insured.Must provide a warranty on both materials and labor. Looking for a professional finish with attention to detail.Budget:Total budget is $2,500 for supply and installation.

Experienced Handy person needed to install floor boards Approx 2.5m2 Engineered floor boards - glued down to concrete Please apply if you have experience Must bring own cutting tools. etc Floor boards and glue included - Install on Monday May 11 - preferable morning

Looking for a professional flooring installer to complete a hybrid floorboard installation in a kitchen following a recent demolition and new kitchen installation. ​Scope of Work: ​Install: hybrid floorboards in the kitchen area (approx. 2 sqm). ​Materials: I have the spare hybrid panels on-site (stored in the garage). ​Requirement: Precision cutting and installation. ​Timeline: Work must be completed on May 5th or 6th (to be confirmed shortly). This must be finished prior to the kitchen kickboards being installed on 6th May. ​The Ideal Tasker: ​Experienced with hybrid/LVP flooring. ​Brings own professional tools (drop saw/table saw for clean cuts). Balcony is sufficient as workspace. ​Reliable and punctual to fit into a tight renovation schedule.

Lay 36 square meter hybrid flooring

Lay 23 m² of groove and tongue Bunnings flooring in an office space(5.5x3.8) straight walls, one with a curve to it

Looking for a floor installation of by all planks click clack on ready preapared flat floor bedroom size 3.5x4 m Please quote best price possible. Dates flexible Thanks Camila

Lay flooring in kitchen, lounge and entry foyer

55-60 square metre. Old carpet will have to be removed and new vinyl plank boards installed. All the material will be provided. Looking for someone to do the job. Only the living room and the hallway.

Looking for someone experienced in laying & cutting Bunnings click-together deck tiles on an approx. 6.3 m x 2.8 m area. Several tiles will need to be cut very neatly to fit: • Around 4 round posts - see photo - only the right hand side / tiles should start just under the wooden deck on the right hand side and finish before the posts on the left • Around a fixed outdoor table base - see photo Scope • Measure and lay deck tiles • Plan layout for good alignment • Cut tiles accurately around posts and table • Ensure tiles sit flat and lock together properly Tiles supplied. Concrete base already prepared. Best Suited For • Handyman / flooring installer with deck tile experience • Someone confident using a jigsaw or multitool for clean cuts

Looking for an experienced microcement / micro-topping flooring specialist to install a seamless mineral floor in a kitchen (~10–12 sqm) in a heritage apartment in Manly. The existing floor is old pine timber boards, so correct preparation, stabilisation, decoupling and levelling are required before applying the microcement system. Finish to be matte and architectural, suitable for kitchen use. The job would need to start on 17 December and be completed by 20 December, or for the installer to confirm whether this timeframe is feasible and their availability. Please note that access is constrained: the apartment is in a heritage-listed building, located on the second floor with no lift. There is no on-site parking; nearby loading zones are available but not all-day parking.

Looking for a reliable handyman to complete a PVC vinyl flooring installation. All tools and materials required for the job are already on-site — no need to bring anything. Scope of work (1 full day): • Remove and neatly stack existing TPE interlocking tiles • Move some gym equipment into our storage garage (goods lift available) • Lay out PVC flooring on the prepared surface • Apply double-sided tape • Hot-weld 4 seams (approx. 13 m each) using our hot melt gun • Trim excess weld and finish seams cleanly We will provide: • Hot melt gun + tips • Grooving tools • Shovel blades • All PVC flooring materials (floor rolls, tape, weld rods) Location: Brookvale Timing: 13th December 2025 start date Seeking someone with solid practical skills and confidence completing detailed manual work. Experience with Vinyl or using a hot melt gun is preferred, but not essential.

Remove existing damaged floorboards - water damaged ones by balcony door (general wear and tear mainly) I have a spare pack of the original floorboards to use as replacements. Of course they will need to be cut to size. Use whole pack to repair as much as you can. May require a little bit of new underlay at the edges of the floorboard as it sinks a little when you step on it. I've thrown in a budget of $100, but I'm flexible. Let me know. The job is just an interim measure as I will be replace the whole floor in a year or so.

Downstairs of a house, flooring to go over the top of existing floorboards and tiles. Leveling work has already been done.

I need approx. 32 m2 hardwood flooring installed in a living room and hallway. It includes 5 steps but the stair nosings have been made already. It will be laid over an existing floating floor which as been prepped to remove all protruding nails and obvious uneven levels. There’s no furniture and no skirtings in the rooms. It will need to be done over a weekend. The timber (pre finished blackbutt) is on site already

Hi I need to tile approx 5m2 of 227x60x11mm tiles on my dining room floor i will do all the prep like laying the tile underlay board as its over a timber floor.

Task is to install hybrid floor boards, floor transition for where floor boards meet carpet, skirting for Hallway and 2 bedrooms. Scotia to one wall. See attached images. I am providing: Hybrid floor boards, Scotia, floor transition. Youll need to supply skirting. But I can pay for this separately. Bedroom 1 - 3x3m (skirting) Bedroom 2 2.9x4.2m (skirting) Hallway 8.9 x 1.47 (floor boards & skirting) Kitchen wall (scotia) I dont know what they going rate is for this type of task.

We need to lay a laminate floor in a small bedroom that is 3.4 x 2.9. We have all the materials. We just need someone who is experienced in laying floors.

Instal new engineered flooring as follows: - 72 square metre, ground floor of house with easy access - tongue and groove - fully glued - to be laid over sanded, level timber flooring that is prepped and ready.

Small part of overall large room (approx 2 by 2) had tiles which have been pulled up. Need floor grinding and levelling, wood laying, skirting added.

install 36m2 of 1400x190mm tongue and groove laminate timber flooring into a mostly rectangular floor (studio unit) Photo sample

Two rooms plus a hallway. Sanding back very orange floorboards plus polish - preferably matte. Rooms are different timbers so I know they won't look the same. Some help to move furniture also required.

I need someone who can assist with cleaning the vinyl floors we have in our office. After someone who knows how to operate a rotary buffer to clean and polish the vinyl floors in our office the offer I have is per hour just need to have it sorted by this weekend

A small area in the kitchen timber floor needs polishing

Flooring has damage and will need to be filled/ replaced in some areas. The rest of the floor needs to be sanded back and polish reapplied. 5 rooms total with 3 bedrooms, two larger living areas and one corridor. House in total is 190 msq this is inclusive of bathrooms, kitchen and carport which do not have floorboards.

Need 3bd floors sanded and polished

Hi Airtasker! We need a quick quote for carpet removal and sanding back old floor boards. If you are unable to be exact, please provide a ballpark range. We'd also like them to be varnished. Do you have UV repellent varnish? Attached is the floor plan. We are located in Harbord, 2096. All rooms are carpeted except the kitchen and living room. Bathrooms are not required. The kitchen has cork flooring that can also be removed to show the original hardwood floors. I like the look of lighter floors, so I am also considering limewash, but I am open to talking through some options. The photo with the windows is the living room area that has been done. The other two photos attached are showing the vibe/color I would like to achieve. YOU MUST HAVE PUBLIC LIABILITY INSURANCE + WORKERS COMPENSATION AND A CONTRACTOR LICENSE. PLEASE PROVIDE THE NUMBER IN YOUR QUOTE!

Approx 5m x5m garage floor

We have ripped up some old Lino and would like to sand and polish the floorboards to match rest of house as best as can. Looking for someone to sand and polish this 2m x 3m area.

- sand 24m2 of timber floor - install a matt foot sealer after sanding

26sqm apartment Parquet flooring Existing flooring shows wear and scuffs

Looking to sand and polish my apartments floorboards by the 5th April. Want 3 coats of polish with a matte finish that is a lighter colour to the current floorboards. The floorboards are made of Cyprus Pine. Photo attached of the desired end result. Apartment size is roughly 43 metres squared and work is only needed in the living room/kitchen and the bedroom.

24sqm herringbone floor needs a sand and polish to get rid of grime. Square shape, one section of a room.

Need our living/kitchen area sanded back and polished to remove scratches from furniture. We are moving out Monday and need this done be Saturday. - Due date: Needs to be done on Friday, 17 November 2023

Sanding and polishing of an L-shaped staircase (18 steps) and floor in small adoining room (3m x 1.8m). Staircase is maple, floor is cypress pine. Carpet to be removed by someone else. Job to be done after 25th July - Due date: Flexible

There are som scratches on floating timber floors - polish around 50sqm (living dining kitchen area) - Due date: Before Saturday, 11 February 2023

Kitchen and family room area needs to sand and polish The area dimensions : 9.7x 4.5 m - Due date: Before Sunday, 5 February 2023

Clean and polish wooden floor - sticky tape marks removal - Due date: Flexible

Timber floors are marked from rain and furniture - need polyurethane stain. - Due date: Flexible

Hi I need to have the floors in my garage polished. approx 18 sqm room is 6x3m. - Due date: Before Sunday, 28 August 2022

room 3.0 x 3.4 original cypress pine flooring needs sanding and polishing - Due date: Before Friday, 26 August 2022

We have removed the carpet from our staircase, and it need sanding and refinishing. Total 15 steps Pls send me your quote price

I have approx 35 square metres of floorboards that need sanding back to bare timber. I don’t need them refinished as we will do that.