Find a reliable computer and IT professional in Melbourne

hide cables on desk top with computer and two screens modum phone use cable raceway surge protector

Our house is currently wired with 1-3 Ethernet ports in each room and 2 racks of Ethernet ports, we have 5G WiFi and need to somehow wire the WiFi signal to the network rack to give all Ethernet ports internet

I’m looking to get my MacBook battery checked. It’s a 2024 MacBook Pro 14-inch (M3). The charger is working and the laptop detects that it’s plugged in, but it’s stuck on the low battery charging screen and doesn’t seem to charge any further. I also remember receiving a “Service Recommended” warning for the battery previously.

Set up my printer, music and tv, computer to contact to it all

I want my cables to be hidden, neatly and managed so they aren’t visible

Need the 3 x wall connection ports for Ethernet/TV to be fixed or replaced. 2x single Ethernet and one double as seen in pics)Needs to be done today or latest midday tomorrow.

Looking for someone to install a dual monitor arm (XCD Gas Bracket Dual Arm - from JBHIFI) onto a desk in Melbourne CBD (Bourke Street, near Southern Cross Station) The job involves clamp mounting the base, attaching two arms, and mounting two monitors - one 34" ultrawide (~8.5kg) and one smaller secondary. Basic cable tidy up after. Photo of the desk attached. Including the BACK of the desk where the clamp will attach. No drilling because clamp method is preferred. Ideally this coming week, most days are available - just needs to be scheduled ahead of time 🗓️

Details: * New Tangerine NBN connection. * Tangerine has confirmed I do not require an NBN connection box and that the modem should connect directly via an RJ11/XDSL cable. * The property has multiple wall sockets (coax and RJ45/telephone style), and I need help identifying the correct active DSL outlet. * I have already tested the coax outlets and they do not appear to be the correct connection for this service. * I have the modem on-site, but the supplied cable does not match the wall socket, so the technician may need to provide or recommend the correct cable (RJ45 to RJ11/RJ12 if required). Tasks: * Identify the correct DSL/telephone outlet in the property. * Verify the NBN service is reaching the premises. * Supply/use the correct cable if required. * Configure and connect the modem. * Confirm the internet is working before leaving. Please bring: * RJ11, RJ12 and RJ45 DSL cables/adapters. * Basic networking/NBN testing equipment if available.

At my old father’s house he had dementia and loves his Foxtel and it is hard for him to manage. I want to help him get Netflix. The portal is near where he watch his Foxtel all the time. He wakes up in late afternoon and he sleeps near the tv. So I will need to entertain him while set up is happening.

Internet is down. Roadworks caused nbn issue and is now resolved. Modem needs to be power cycled. Also NAS needs to be upgraded powered on. It’s possible if this doesn’t fix it you may need to talk to provider (Aussie broadband) but unlikely. Also unlikely but bringing a laptop to plug in and to to test may be needed. The device is in a locked cabinet and may need a small ladder for easier access.

Need help troubleshooting connection of my printer and also my new computer screen. Screen keeps going to sleep and is not talking to laptop.

I need a Cat6a data cable installed in my house. Around 30 - 40 metres in distance. It needs to run from the front bedroom when the NBN box is to the back of the house which is the living room. Access to the roof is a trap door and you will need a ladder to access it. The front part of the house was built approxiamately in the 1880's and back part of the house is a renovation from about 15 years ago.

I need a hard drive installed into a gaming computer. The hard drive is a iron wolf and I understand that I will just need to be connected to the cables

Cable modem and TV points next to existing power points in both bedrooms, duplicating/extending existing cabling in the dining room.

Computer running really slow

I have an NBN HFC connection and Ethernet wall ports in multiple rooms of my apartment. I need an experienced data cabler/network technician to: * Test and identify all Ethernet wall ports * Patch the ports correctly in the communications cabinet * Install/configure a network switch if required * Connect my office and bedroom wall ports to the network * Configure wired backhaul for my Google Mesh (or advise on a better setup) * Ensure I can connect devices such as a TV and computer via Ethernet wall ports Must have experience with: * Structured cabling * Home networking * NBN * Mesh Wi-Fi systems

Computer software maintenance. Basically download a few apps now my office 365 is not working and doesn’t open word etc . I also want to get rid of any apps like docs as it’s interfering with my laptop word etc

We are looking for someone to remove 23 x 27-inch monitors across 12 retail stores. Current setup in each store: 4 monitors mounted on 2 dual-monitor mounts at the front POS counter. Scope of work for each store: Remove 2 customer facing monitors Replace 2 dual-monitor mounts with 2 single-monitor mounts (provided) Reinstall and secure 2 staff facing monitors on the single-monitor mounts Tidy up and organise all cabling/wiring Leave the removed monitors onsite Dispose of the removed dual-monitor mounts Please provide your quote including labour and any travel costs for all 6 stores. Locations: VIC - Airport West VIC - Broadmeadows VIC - Cranbourne Park VIC - Doncaster VIC - Epping VIC - Moonee Ponds VIC - Mornington VIC - Northland (Preston) （1 screen only） VIC - Southland VIC - Watergardens VIC - Werribee VIC - Woodgrove Melton Please do not apply if you cannot help with all the store listed. Thank you.

Hi there, I borrowed a friends MacBook Pro. 2015, to use for study, but…in resetting and trying to upgrade to the most recent and available operating system, I managed to completely wipe the hard drive / operating system. I don’t need to recover any files or cloud or ye olde Time Machine but I do need to have more than a blank screen. The task needs to be done in person. Thank you.

Need someone to set up my Miyoo Mini Flip handheld emulator Looking for someone experienced with retro handhelds/emulation to help fully set up my Miyoo Mini Flip. Tasks include: * Formatting a brand new SD card * Installing/setup of operating system/software * Downloading + organising games * Emulator/program setup * Making sure everything runs smoothly and is ready to use Device: * Miyoo Mini Flip * I already have the new SD card ready Location: * South Melbourne, VIC * Happy to meet locally Budget: * $50 Ideal person: * Familiar with Miyoo devices / retro handhelds * Comfortable with ROMs, emulators, firmware etc. * Prefer someone who has done this before Please message with: * Your experience * Rough turnaround time * Any examples of similar setups you’ve done