Find a local network troubleshooter in NSW

I have a Telstra Gen 4 modem/router plus two wall-mounted WiFi booster discs at separate locations in my home. Currently each unit broadcasts under a different network name, meaning devices don’t automatically hand off — you have to manually switch WiFi logins as you move around. I need someone to reconfigure the setup so all three units broadcast the same SSID and password, creating a single seamless network. When I walk from room to room, my devices should connect automatically without any manual switching. The work involves: • Accessing the Telstra modem/router admin settings • Reconfiguring the booster discs to operate in access point mode (or enabling roaming/mesh mode if supported) • Testing that devices roam seamlessly between zones Must be comfortable with Telstra home network equipment. Happy to be present throughout. The goal is one WiFi name, one password, whole home covered.

I would like some help with setting up my home network. I am trying to get MoCA working which is proving difficult in my new rental apartment. Happy to walk you through the requirements over the phone prior to arrival so you can be prepared ahead of time There is also old telephone ports throughout the home, is it possible to use this instead of MoCA if not wired appropriately?

Hi there, I’m looking for itemised quotes to upgrade and optimise our home internet network to achieve strong, reliable whole-home Wi-Fi coverage. 🌐 Current Setup NBN Fibre via Leaptel 500/50 Mbps unlimited plan Existing mesh system: 3 × eero 6+ units 🏠 Home Layout / Cabling Structured data/phone distribution box located in the garage (photos available) Existing Ethernet cabling throughout the house, including: Upstairs: ~5 data points + ~5 phone points (bedrooms) Downstairs: at least 1 data point under stairs + 1 in study nook Possibly additional outlets around the home 🎯 Project Goal Upgrade to a fast, stable, professionally designed Wi-Fi network with strong coverage across all areas of the home. I’m particularly interested in: Ubiquiti UniFi system (preferred) Or other enterprise-grade / high-performance mesh or wired AP solutions Best use of existing structured cabling where possible 🔧 Scope May Include Site assessment / review of existing network cabinet Design of optimal WiFi + access point placement Supply and installation of equipment Configuration (SSID design, roaming, optimisation, VLANs if relevant) Removal or repurposing of existing eero system 💰 IMPORTANT – QUOTE REQUIREMENT Please provide fully itemised quotes, clearly breaking down: Hardware (routers, switches, access points, mounts, etc.) Labour / installation costs Configuration / programming costs Any optional extras (e.g. additional APs, upgrades, cabling work) Ongoing support (if offered) 📍 Location Lane Cove Area, Sydney NSW 2066 💬 Please also include: Ability to easily turn on/off system and scheduling of this Recommended system design (with reasoning) Experience with UniFi or similar enterprise networks Availability for site visit and install timeframe

Description: Looking for an experienced network/IT professional to diagnose and fix ongoing internet stability issues at my home. The problem: Internet speed is fast (300–750 Mbps), but performance is inconsistent Frequent lag and poor quality on Microsoft Teams/video calls Dropouts and unstable connection, especially under load Mobile hotspot works perfectly (no lag), so issue seems local network-related Test results: Bufferbloat grade: D Latency increases significantly under load (+200ms) Ping is stable when idle (~4–7ms), but spikes during usage Current setup: Main house + granny flat setup TP-Link Archer A72 router Secondary router/access point in granny flat Laptop uses WiFi (WiFi 6/7 capable adapter) Speeds are actually higher in granny flat (~500–600 Mbps) than main house (~300–400 Mbps) What’s already been tried: Router reset and reconfiguration Adjusted WiFi settings (channels, bandwidth, etc.) Updated laptop network adapter settings Disabled Killer network prioritisation software Tested multiple speed tests and latency tests Internet works fine via hotspot (indicating router/network issue) What I need: Diagnose and fix bufferbloat / latency spikes Optimise router settings (QoS, traffic shaping, etc.) Review overall network setup (main house + granny flat) Ensure stable connection for video calls (Teams/Zoom) Improve WiFi performance in main house Optional: advise on best setup (Ethernet vs mesh vs access point) Goal: Stable internet (no lag or dropouts) Consistent low latency under load Reliable video calls without issues

Bought house with several CAT6 cables unterminated coming out of a wall, need someone to terminate, identify where they originate, label, and install two brush plates and an ethernet plate. Tasker to provide materials.

Installation of (I have all hardware here) -Wireless access points -Network switch, modem, router, parch panel -Server and server rack -Several CAT6 cable terminations -Set up TVs, PC access points, access control and security cameras -Get all up and running In a large family home in Maroubra. I have FTP NBN installed. Difficult job to price so ideally hourly rates and take as long as you need.

I need someone to run network cables within my walls for additional network ports. One port for my son's room and another port for my work desk. I already have 4 ports pre built in my apartment.

Office Network setup understanding and experience

To fit and supply network cables from nbn in lounge room to two bedrooms without cables being exposed.

Need to supply and install network cat5 wall plate for 2sockets

My wireless connectivity is crap since I installed a Eufy system. I want to set up home automation. I have a Google network which is not being utilised which may aid.

Optus FTTP Google Nest Pro wifi Session dropouts regularly particularly on MS teams over work VPN.

Connecting 2 PCs n 2 printers to network n internet

I need help configuring my DTF printer XP600. The printer connects with Ethernet cable but the computer does not detect it and the RIP software shows it offline. Looking for someone with experience in DTF printers or industrial printers who can help configure the network connection and software. the machine is new and we do not know anything about how use and set up. Remote or onsite help welcome.

I am need someone to run and Install network cable from data hub downstairs and run into upstairs and in-wall cavity to a socket which is upstairs there is a suspended slab.

Ethernet cable repair It looks like when we first moved into this house the Telstra technician made changes to the wiring to make adsl connection work. However I no longer have adsl and I want my Ethernet connection again. Can this be patched up so that the Ethernet connection works again

Need to run a cable from my building NBN to my apartment. Currently does not have NBN wired through the unit. There is NBN cable right at the entry of the unit.

Open to all offers - existing modem and internet - need connect router and install celling WiFi booster ( existing cable and mount *3 spots in the house ) - exisiting cctv and alarm system to be transfer to my own account ( pls see app photo )

Our home internet keeps dropping out intermittently across the whole house. NBN (iiNet) to the modem is working fine, but our Google WiFi mesh system (shown in the photo) seems to be the issue. We have multiple Google WiFi points across a three-storey, double-brick home, and devices often lose connection for ~10 seconds at a time before reconnecting. We need someone experienced with Google WiFi mesh networks to: • Diagnose why our Google WiFi points are failing or dropping • Check configuration, placement, or any faulty units • Restore stable, consistent internet across all floors Experience with mesh networks / Google WiFi is essential.

I need someone to hook up a new router and set up a mesh network in my home. I have all the equipment, just need it hooked up.