Find professional window and door services in Sydney

I’m looking for quotes to change the swing direction of a hollow garage storage room door so it opens outwards instead of inwards. The door itself appears to be a hollow/internal-style door, but it sits in a metal frame with metal hinges. From the photos, the hinges appear to be fixed or welded into the frame, so I’m assuming the existing hinges may need to be removed, replaced, and re-welded or otherwise refitted. The job would likely involve: * Changing the door so it opens outwards * Removing/replacing/refitting the existing metal hinges * Re-hanging and aligning the door properly * Moving or modifying the strike plate/latch receiver so the door closes and locks correctly * Making good any affected areas * Colour-matching the paint on the door, frame, hinges, and any repaired sections I have approval from the owner to do this, but he said the finish and workmanship are very important because this is part of a strata building. The completed job needs to look neat, professional, high-end, and as close to original as possible. Please include: * A quote or estimate * Photos of similar work you have completed * Confirmation that you can handle the hinge/frame/ strike plate work and colour-matched finishing

I just buil a wall with mdf and now I want to build the door, I have parking in mascot

Hi, I need two (2) doors supplied & installed (one barn door & one normal) with black hardware. In the style as first photo which is a standard style from Bunnings. I don’t need them painted, just supplied and installed. The measurements are unusual:- - open / standard door 57cm wide x 193cm tall (approx) - barn door 70cm wide x 217cm tall (approx)

Patch needs tidied up, I have the paint but need confirmed if it’s correct match as I don’t think it is (Bunnings said it was but looks wrong). This wouldn’t be a long job - but need done before an inspection tomorrow at 10am

Need an inside door blended (it’s patched but could be smoothed better) and painted. I have paint but not sure it’s correct match when it’s on (see photo) Need done for an inspection before tomorrow at 10am.

Door is patched (but could be slicker) and painted but needs blended in. I have the original door paint name and was given the match from Bunnings but it looks different? So a slicker sand, paint and blend required. Photos on request. Ideally between 5-6pm, inspection Saturday morning at 10am so needs done before that

Window and door installer replacement window uninstalled light cream sliding door every type of aluminium

Scope of Works Supply and install (“S&I”) new thin pocket door and stud walls. All new walls to be finished in plasterboard ready for painting (painting by others). Supply & Install 1no. new surface mounted sliding door Install new crown molding to bathroom area to match existing. Cut in mitred corners with existing moulding where required Repair hole in ceiling where ceiling fan removed Supply all materials required to complete works and remove all rubbish. Specifications: Below specifications are indicative the contractor is to propose a solution that works in the space provided. Site measure required first. Cavity Door spec: ‘Hume 2040 x 820 x 90mm Evolution Flush Jamb Door Cavity Unit (if it fits) Sliding Door Spec: Hume 2040 x 820 x 35mm Internal Door Oak Oakfield HC2

Sliding door roller on the rear seems to be stuck, scraping when door needs to be opened. Front roller seems to be working. Available today. Pic 1: Bottom of door (rollers) Pic 2: Rail/track below door - scraping from door Pic 3: length of door

Front door hinges broken and need to be repaired or replaced

Install Kilargo Weatherseal on front door. The existing channel is a few mm too shallow, needs to be deepened. Width of existing channel is 15mm.

Bathroom door fixed in a metal frame came off the frame. The hinge, door and frame are intact but the hinge is secure on the frame with rivets that need to be removed and replaced.

Inspect , fix or replace bathroom privacy door handle . Standard bathroom internal door - need this to be done on Tuesday 12 May ( 2 pm onwards ) or Wednesday 13 May before 1 pm. Unit is on York street in Sydney cbd Pics posted now . It’s just one internal door ( both sides )

Change four internal door handles

The pivot connection at the bottom needs to be filled or braced.

Looking for a reliable handyman to complete a few small installation jobs in an apartment (Elizabeth Bay). Tasks: 1. Replace drawer knobs (x4) * Remove existing knobs from drawers * Install new knobs (already purchased – see photos) * Ensure they are aligned evenly and secured properly 2. Mount extendable laundry hanger to wall * Install onto brick wall * Product, screws and instructions provided * Will require proper drilling into brick and secure mounting * Needs to be level and sturdy for regular use 3. Install sliding latch on front door * Drill and install latch (see photo) * Align so it closes and locks smoothly * Ensure it sits flush and functions properly Additional info: * All hardware is provided, however some items are from online retailers so happy for you to use your own higher-quality screws/anchors if needed for a more secure result * You will need your own tools (including drill suitable for brick) * Prefer someone experienced with similar handyman/install jobs * Easy access to apartment Timing: Flexible – can coordinate a suitable time Looking for someone detail-oriented who takes care with finishes.

I’m looking for quotes to get this shower door fixed. There are two sliding doors that are supposed to move together, but they’re currently overlapping and skipping. There is a broken plastic part that supposed to make this happen. Also the wheels that support the doors also came loose, so would need new ones. I’ve removed one of the doors for now to prevent it from falling, but it will need a proper fix by a handyman. I’m happy to send a video showing what’s happening

Require a handy person to assist with 3 x cabinet bulkhead door/graphic installation in Pitt Street Sydney 9am Sunday 26th April. Assistance is required to help lift and hold bulkhead doors whilst they are being fitted in place, total time required approx 1hr but allow 2hrs max

I have some sliding drawers that have broken attachments (to their slides) and a couple of cupboard doors that also have broken or missing spring attachments. I am not sure what these things cost, so budget is a guess.

I need handles installed on 17 kitchen cabinet draws / doors. I expect them perfectly aligned and centered.