Find experienced local tradies in Pymble

Task Title: Professional Black Mould Remediation + Wall Crack Repair & Repaint Job Description: Internal home maintenance in Pymble. Multiple black mould areas on damp walls plus several wall cracks needing permanent repair. Scope: 1. Inspect mould cause (condensation check), fully kill & remove mould with proper treatment, not just surface wipe. 2. Repair, plaster and sand all wall/ceiling cracks. 3. Coat repaired sections with quality anti-mould primer, then top coat to match original wall paint. Expect long-lasting results to stop mould recurring. Supply all labour and materials. Submit fixed-price offer based on attached photos. Only candidates with proven mould repair experience apply.

Fix 1 small plasterboard hole.Please supply materials,cheers

Wiring done at my house involved making 10 holes in the gyprock and were covered with blank panels. I need the holes fixed with gyprock and painted over. I will supply the paint.

Doorway has been widened and a concrete lintel put in place. Lintel and walls need to be rendered in and squared off.

Hi there, We’ve recently had new doors and windows installed and are looking for someone experienced to carry out some tidy-up work. Scope includes: * Rendering around new window/door frames (some exposed brick) * Wall patching and prep for paint * Minor repainting to blend in with existing finish * Small carpet touch-ups * Possible skirting board repair/replacement This is a small job, but we’re after someone who takes pride in their work and has a good eye for detail – ideally with solid rendering/patching experience. Please only get in touch if you’ve done similar work before. Photos can be provided. Thanks

Need these 3 sides of the house rendered. The length is about 11m each.

Repair of render of an external garage about 25 m2

I need a small hole in my apartment wall plastered/patched

I need someone to help me install an Instahut 2.8 x 2.1 window awning on the brick wall.

1))Ceiling on back verandah had mould..needs scrub with long mop. Also some timber around verandah roof and fan needs clean. 2) hang up solar powered lights once verandah is clean

I need a talented renderer with an eye for detail to render/finish two small rooms' ceilings. They are currently rough concrete. One is chemically stripped of paint the other is mostly strong existing paint.

Looking for a licensed electrician to:    •   Wire and commission a 9 kW sauna heater (isolator already run).    •   Install supplied sauna-rated LED lights.    •   Install supplied ventilation system (could be passive or mechanical – confirm on site).    •   Connect automatic sensor so lights and ventilation switch on when the sauna door is opened.    •   Test, certify, and provide electrical compliance. Ongoing sauna projects available for the right person.

Custom sauna in Pymble. Install Western Red Cedar cladding (walls/ceiling) and build floating benches with clean joinery (incl. miter joints). Ongoing work available. 🔨 Job Scope – Carpenter (Sauna Build Pymble NSW) Project: Custom sauna build – dimensions 2.0 m (W) × 2.0 m (D) × 2.4 m (H) Scope of Works: 1. Stud Framing       •   Construct stud wall framing to suit sauna dimensions.       •   Frame spacing at 450 mm centres (to suit insulation batts).       •   Ensure solid fixing points for future cladding and benches. 2. Insulation       •install insulation batts (Earthwool or equivalent R2.5).       •   Ensure full coverage in walls and ceiling with no gaps. 3. Vapour Barrier       •   Apply sauna-grade vapour barrier (foil wrap).       •   Seal overlaps and edges with aluminium tape to create airtight moisture seal. 4. Battens       •   Fix 30 mm timber battens horizontally to walls and ceiling over vapour barrier.       •   Maintain correct spacing and straight alignment for cladding installation. 5. Cladding (for this stage of the job)       •   Install Western Red Cedar cladding on:          •   Back wall (full height, 2.0 m wide × 2.4 m high).          •   Ceiling (2.0 m × 2.0 m).       •   Leave both side walls unclad (as they will be tiled by tiler).       •   Ensure neat joinery, straight lines, and allowance for thermal expansion. Materials:    •   All cladding and insulation provided.    •   Carpenter to bring own tools, nail gun/screws, levels, and saws. Deliverable:    •   Back wall and ceiling fully clad in cedar.    •   Side walls prepared for tiler (framed, insulated, vapour barrier, battens only).    •   Work to be completed to high standard, sauna-ready for next trades. Budget guide $400–$1,200 — I’ve set $800 as a placeholder. Please quote fixed price and include photos of similar work, ABN, insurance, and availability.

We’re building a custom sauna in Pymble NSW and want quotes from multiple trades for this job and future work. TRADES NEEDED • Carpenter/Joiner – Western Red Cedar cladding + floating benches (miter joints) • Electrician – sauna heater + isolator cabling, IP-rated LED, ventilation fans + auto sensors • Tiler – walls/floors (porcelain/stone), suitable adhesives/grouts, clean finishes • Glazier – full glass sauna front & door (toughened or double-glazed, sauna-rated) BUDGET Guide only. Quotes welcome within: • Carpentry $400–$1,200 • Electric $450–$1,500 • Tiling $500–$1,500 • Glazing $600–$2,000 (I’ve set $900 as a placeholder. Please quote for your trade/scope.) ABOUT THE FIRST JOB (Pymble) • Full sauna fit-out: cedar cladding, floating bench, heater + isolator, LED, ventilation, glass front, tiling. • Ongoing work available across Sydney for reliable trades. PLEASE INCLUDE IN YOUR OFFER • Licence/ABN (where relevant), insurance, recent photos of similar work • Availability, fixed price, and any exclusions

Remove single power point from a external wall harness and install a double power point into wall

Build entrance hall drywall with timber frame and gyprock panels. See pic for demo (brown paper). Install skirting boards and cornices to match existing. Finish to be ready for painting.

Add cornices to a newly renovated laundry celing. 6 lineal meters. 6 corners. Flexible with timing but ready to go now. Please ignore the budget - looking for quality work at the right price.

I need to fix a wall damage (as per in picture) on a Gyprock wall. The size is 20 x 15cm. Who can help?

1. Remove asbestos in laundry and gyprock walls/ ceiling W 2.5 x 1.6 W 2.5 x 2.0 C 2.5 x 1.7m 2. Replace internal small ceiling in house 4.3m x 0.9m 3. Remove asbestos garage on one wall and replace gyprock 5m x 2.7m height

Replace burnt out 15amp power outlet. Outlet was still operating however is clearly unsafe and not being used.