Find experienced local fencing contractors in Prahran

Hi I am looking at getting a quote to make my fence higher/extend it higher. Not sure if it can be extended or if whole fence needs to be replaced

Pailing fence needing a new support post

Experienced Carpenters/ Chippy only - need 2 onsite - build a 9m feature wall - I have the pine panels to affix to existing boundary fence- the extend the side with concrete sheeting - so build frame - need tools - $50 to quote . Probably 2 days install . No photos as it’s just a fence now that will be redone with your handy work !

Unscrew heavy glass panels of pool fence (each one approx 70-80kg) and move to store on our property or ideally remove from property. (We have arranged temporary fence already)

A paling fence needs 1 upright post supported with a new upright post supported

Small section of boundary pail fence to be completed. Materials are here . Remove old fence . Need own tools . Experience please

Need to replace side fence with 2.1mtr timber pailings. Length is about 13mtrs of fencing. Full replacement required including posts rails and plinth boards etc

We're looking to install hardwood panels on the interior of our slatted fence for privacy and sound reasons. We're looking for someone who will come measure the panels perfectly and provide us a cutting list to get the panels CNC'd from Plyco. We would then have you come back and do the install when the panels are ready. There's approximately 15 panels measuring roughly 1600 x 850, but all vary slightly.

A custom made chunky paling timber fence has a slight lean and needs some anchor posts or galvanised pipe rods installed to correct the lean. One paling needs replacing

I have purchased a hoselock hose reel for my front garden and realise that the best placement involves a wooden post being concreted into the garden bed and then the reel being attached to that. So, dig a hole big enough to hold the weight, shove in a post, concrete it in and attach the hose reel. I could do it, but i don't have a post, i don't have the cement and my wife says I am hopeless with power tools. Which is fair. (the reel weighs 9.5kg apparently) and I guess it will need to be approx 75cm-1m off the ground). A bit top heavy

Paling fence being pushed over by a few trees. Need it straightened but want to keep the trees. May mean cutting bits of fence and using the trees as part of the fence. The shed and largest tree in photos will be removed before the fence work, so pretty clear access.

Replace a fence with the dimensions: Length: 12.5m Height of Pauling fence: 1.95m Post height 2.7m

straightening and repair of short fence

Will need the front and back of the fence re-rendered. Experienced only !!

Replace rotten wood fence with treated pine 45metres by 2250h. Dig out post hole and dispose of old Keane clean and tidy.

Replace an existing 6.5m fence with a new picket fence. Fence will need 4 posts and a gate.

A custom made timber paling fence in chunky palings, some new palings are lifting, as they weren’t properly attached

There are five tasks in total: (1) Install a ~2m long, 1.5m high picket side fence, with a gate. The latch on the gate should be a Lokklatch or equivalent. This fence does not need to be painted. Photo of gap to be fenced / gated is attached. (2) Replace an existing side access gate with a new 1.5m tall picket style gate. The latch on the gate should be a Lokklatch latch or equivalent. The gate does not need to be painted. The existing gate needs to be removed from site and disposed of. Photo of current gate is attached. (3) Install a ~1.2m high, 3m long railing to match a deck. The railing uprights and top rail would be timber, but the lower stringers would look great as stainless cables. None of this needs to be stained / painted. The value I've stated should include all labour, materials and disposal fees.

Install gate latch and screw timber backing back into gate

We require someone to install gate latch onto a metal fence which came off, need screws and bits into iron gate. We will provide the latch