Find experienced local carpenters in Prahran

I have WVH Wall Panels and Weathertec Wall Panels to install onto 2 interior walls asap.

Our shed floor needs replacing. We can strip out the existing floor but we need help doing a couple rip cuts on plywood panels. It will just be placing and screwing down the three panels onto the existing joists. Extra if you can pick up some panels 2 X (2400x1200mm, 21mm F11 treated pine structural) and bring them to Prahran. Materials will be covered.

Just looking for 3 rectangular strips of stainless steel in 304 finish for some trim Strip #1 Thickness: 0.7 or 1mm 902mm width 45mm height Strip #2 & #3 Thickness: 0.7 or 1mm 327mm width 30mm height For strip #1 I would pay extra if you have a press brake machine that can do a 90degree bend/return of 15mm. So 45mm face, with a 15mm return, 902mm long. I will pick up or pay for delivery dep on location

I need the hinges on a kitchen cabinet replaced. I have the new hinges but I do not have packers as the existing drill holes are too big. You will need to supply packers and bring a drill. Location is an apartment on High Street, Prahran. Monday afternoon, Tuesday morning or any time on Wednesday.

I need someone to assemble a vidaXL stainless-steel BBQ sideboard for my own backyard in Prahran 3181, Australia. The cabinet (SKU 51051, EAN 8719883680934) measures 120 × 50 × 95–97 cm, with an 85 cm tabletop, 20 cm adjustable legs, a 10 cm backsplash, two sliding doors, and storage space. Assembly instructions are provided. The parts are on hand; I have some tools but am unsure exactly which tools are needed. Assembly is preferred around 8 October 2026, with flexible timing if needed.

I need 2 gates installed that can swing in and out wand to hinge system and 1 door

Looking for someone to install a stainless steel wall shelf onto the brick wall pictured. Shelf, brackets and original mounting hardware/fixings are all supplied. I also have the installation instructions. It needs to be mounted securely and level on the front of the brick wall, underneath the TV, just below the power points. Please take appropriate care when drilling and ideally have a detector to check the area before drilling. Should be a fairly quick and straightforward job for someone with the correct masonry drill/tools and experience mounting into brick. Located in Prahran. Happy for you to use your own suitable masonry fixings instead of the supplied ones if you think they’ll provide a better/safer installation.

Shave down door to fit in door frame

Need help putting 2x stainless steel shelves together

Experienced Custom Cabinet Maker / Joinery Builder Wanted – Prahran Looking for an experienced cabinet maker / custom joinery builder to build an L-shaped partition/wall inside our restaurant, Canai Prahran. Scope of work: * Custom build an L-shaped wall/partition for the existing area * Include a rectangular pass-through window/opening for dishes * Design and finish must match and blend with our existing restaurant interior * Able to measure, recommend suitable materials and provide a neat, professional finish * Supply and installation preferred 📍 Location: Canai, Prahran You are welcome to drop by for a site inspection before providing a quote, as we understand accurate measurements and seeing the existing interior may be necessary. Looking for someone experienced who can understand the existing design and make the new structure look like it was always part of the space.

CUSTOM REMOVABLE SHELVING & CABINET MODIFICATION I’m looking for an experienced cabinet maker, stainless-steel fabricator, carpenter, or skilled handyman to modify existing cabinets in our commercial restaurant. I NEED THIS JOB COMPLETED BY MONDAY. SMALL CABINET – 2 UNITS Approx. 45cm W × 35cm D × 70cm H each Unit 1: * Remove existing cabinet door. * Install 2 removable shelves, creating 3 layers. * Approximately 20cm spacing between each level. Unit 2: * Remove existing cabinet door. * Install 3 removable shelves, creating 4 layers. * Approximately 15cm spacing between each level. LARGE CABINET – 1 UNIT Approx. 45cm W × 63cm D × 70cm H * Remove existing cabinet door. * Install 2 removable shelves, creating 3 layers. * Approximately 25cm spacing between each level. 🔧 IMPORTANT – REMOVABLE SHELVES All shelves MUST be removable. They need to be easily taken out for cleaning, maintenance and access to the cabinet. Please do not permanently weld or fix the shelves. MATERIALS You must supply all materials required, including: * Shelves * Brackets/supports * Screws and fittings * Any other materials required for installation Please recommend the most suitable material for a commercial restaurant environment. It must be strong, durable, easy to clean and suitable for regular use. 📏MEASUREMENTS The dimensions provided are approximate. You can measure the exact spaces on site before fabrication/installation to ensure everything fits correctly. DEADLINE MUST BE COMPLETED BY MONDAY. This is an urgent job, so please only make an offer if you can complete the entire job by Monday. PLEASE BID I am not setting a fixed price. Please submit your best quotation for the complete job, including labour + all materials. When making your offer, please include: * Total price * Material you will use * Confirmation that all shelves will be removable * Time required to complete the job * Photos of similar shelving/cabinet work you have completed

I need an experienced carpenter joiner or handyman to build a custom L shaped enclosure inside our restaurant in Melbourne CBD. The enclosed area will be used as our dedicated dishes and dishwashing area. The main purpose is to create a practical and organised space for handling dirty plates while also matching the existing timber interior of the restaurant. The attached photos show the actual area and our design concept. The enclosure needs to follow an L shape based on the marked layout in the photo. The front side of the enclosure will have a passthrough opening. Staff outside the enclosed area will be able to easily place or pass dirty plates through the opening. Inside the enclosure there will be a stainless steel work table where staff can receive the plates sort them clean them and stack them. The enclosure should include a suitable access door for staff and enough internal space for the dishwashing workflow and equipment. We would also like storage space underneath or around the work table for trays racks and other dishwashing supplies. We would like the outside of the enclosure to have a timber finish that matches the existing restaurant interior. The inside should be practical durable hygienic and easy to clean. We are open to suggestions regarding the best materials and design. We would prefer someone to come and inspect the site in person before confirming the final design and price. The space is difficult to fully explain through photos so a site visit is important to understand the layout take accurate measurements and discuss the best solution. We are looking for someone with experience in custom carpentry joinery timber partitions restaurant fit outs or commercial interior work. Please provide examples or photos of similar work if available. We are looking for a professional quality finish and are happy to discuss the design with an experienced tradesperson.

Fix the Cabinetry that is removing / falling off my dishwasher and secure the dishwasher

Resize wine rack to fit in cavity Install wine rack above fridge Open to other solutions

We need to fix out cabinets. - Doors are wonky - realign the doors. - Add push to open mechanism on all doors. - Cut a notch into the back of the cabinets so they sit flush to the wall above the skirting + random task - help drill our vaccum stand onto the wall

Require a cabinet to be made. Ideally with one drawer and two cabinet doors. Require some simple panelling on the facing, to match other cupboards.

We are buying a TV soundbar that needs to sit on a piece of custom furniture. In order to not have the soundbar be too prominent we want to house it in a piece of free standing joinery that is 2-pack painted to match the rest of the cabinetry. The joinery should be a box with a top, bottom and 2 sides. The front should be speaker cloth. The back should be completely open - please see sketch attached. External dimensions: 812 W x 162 H x 166 D. Paint colour is NAME: RED VINE MANUFACTURER: DULUX FINISH: 20% GLOSS TBC CODE: S01D9 SUPPLIER: DULUX

I need a custom built table to run along the wall of my studio. I have drawings made up but its just a guide. I'm open to design ideas, but I'm thinking marble look laminate. No power required to the table. Fixed to the wall. Budget friendly. (I already have the mirrors) Measurements 8535w x 750 h x 700 d Renovations are starting on 15 June and will take around 3 weeks. Table will need to be installed around first week July.

1) Remove old kitchen bench, draws and cupboards. 2) Build and install IKEA kitchen draws, cupboard, dishwasher alcove 3) Cut sink hole and fit into benchtop 4) Drill hole for mixer tap and fit to bench top

Cut out a space for a dishwasher under bench in an existing kitchen cabinet. Still need to maintain the appearance of the kitchen. I want to be able to have the remaining cupboard space under the sink as well so a small door or a blank can be installed between the edge of the dishwasher and the next door. Pillar will need to be moved across. I have some photos with the measurements. Dishwasher is 820mm high, 600mm wide and 570 deep. Parking is off street (I have a driveway)