Find experienced local carpenters in North Melbourne

I’m looking for a cabinet maker to build a wall bed and surrounding cabinetry in my spare room (pictured). I will be able to provide the wood for the wall bed (I will organise the wood to be cut and shipped through Plyco when we have a cabinet maker locked in). The wall bed unit (see in images) will be a kit from Wall Beds Australia and it comes with all the instructions. I have made a very rough plan (see images) for the surrounding cabinetry, so that it all looks built in. No painting needed.

Looking for someone to build a simple timber stud frame approximately 4200mm wide x 2000mm high. - Basic timber stud framing only. - No plasterboard, insulation, painting or finishing required. - Timber required to be supplied. - Can be built as separate sections/panels for easier transport and handling. - No installation required. - Simple construction. - Recycled, offcuts, or reclaimed timber is fine. - Appearance is not important Please provide: * Quote including materials. * Whether you would build it as one piece or in sections. * Earliest availability. Delivery required to North Melbourne. Looking for the most cost-effective option.

Need those two shelves removed from the shelf supports. They have been glued to the wooden shelf support.

Hey Need a cabinetmaker to help knock up some cabinets for installation into offices. 20 x Cabinets total.. L 960 x H 800 x D 600. Install work available after cabinets are constructed.

Staining a wood (spotted gum?) deck size around 4x2.5m.

Hey there. Job in North Melbourne- New consulting rooms. Hang seven internal doors theyll need to be docked as their 2.3m doors atm ...margins need to be accurate to control noise transfer - checked out hinges. Hardware supplied. Cheers

Need a cabinet maker or able carpenter to install hinged deco ply to existing cabinets. Seeking advice on hinge type needed. Measurements & cuts that need to be made. Must have all necessary tools to complete job

I’ve got some joinery I need a standard size cable hole put into the bench top (36m) and one in the interior of the cabinet (18m)—vertical panel. Hoping you can supply pls the plastic rings that tidy the hole(s)(white). No electrical work required.

I'm looking for an experienced person to restore the back deck of my house in North Melbourne (~15m2). The job includes: -sanding the deck back to bare timber -repairing some of the timber boards that currently impair the free movement of the door (as can be seen from the marks in the picture) -cleaning and preparing the deck surface for finish -applying deck oil or stain (supplied or agreed upon) Must supply own equipment. Open to quotes. Thank you!

We’re after a 1st or 2nd year carpenters apprentice. We’re builders and specialise in all aspects of construction. This is a great environment to learn a broad range of skills and all aspects of the trade, not just carpentry. Contact me if you’re interested. so don’t expect to be doing only carpentry.

I have a few things I need done in my apartment. An ironing board that I’d like turned into a normal drawer, a pantry I’d like to wheel out further if possible, some shelves I’d like drawers (about 6 - 8) and a sliding door to laundry that gets stuck and needs trimming.

skirting board (also known as baseboard) with a quarter round trim or scotia trim at the bottom.

I need to cut some mdf at specific sizes and angles also I need cutting some 12mm woods at 45 degree angles. Its going to be a precision cut so please let mw know if you can do it

my laminate to my kitchen joinery are old and laminate are coming off and need replacement. That includes all the drawers and cupboards. i need some options. there is a pullout pantry to the side which needs replacement in terms of its pullout joinery mechanics.

Looking to have hung 2x 2100mm 10kg stainless steel shelves into a drywall 2x 600mm 4kg stainless steel shelves into brick Wall has two studs separated 1200mm apart centred however these will not work for the shelf brackets. Could drill holes into the back of shelves. You will need to: Supply appropriate heavy-duty anchors Properly mount shelf ensuring it's level and secure

Build a countertop to cover up the area of the elevated platform , we want it to hold a coffee machine and other equipments. Picture is for the concept of how we want it to look

Stains on wool sweater. Looking for someone to fix this. Not sure what’s possible - open to changing the colour of whole sweater.

A timber create - 2.4m x 1m with broken create inside it need gone asap

Urgent welder required- Need to fix termination of hand rail(one way from the pic attached) Please note, you need to supply and install the material

After a custom cupboard with melamine and moisture resistant substrate. Would need to make in 2 modules unless assemble on site in North Melbourne. See pictures for drawing details/dimensions. Thanks