Find experienced local carpenters in East Melbourne

Plan is in the photos Feel free to quote

Replace existing small door with new flush paint- grade door Patch and plaster an old gas heater vent opening approximately 400 x 400 mm

Looking for an experienced cabinet installer for a residential project. Scope includes installation of pre-made cabinets, alignment, leveling, and secure fixing. Attention to detail is very important – clean and precise finish required. Must have prior experience in cabinet/joinery installation, own tools, and be reliable. Location: Hawthorn Timing: weekend Please send your quote (hourly or per job), availability, and photos of previous work. I am comparing multiple quotes, so please provide your best price upfront. Potential for ongoing work for the right person. Only experienced installers please – not suitable for beginners.

Need a joiner to: Adjust draws and cupboards Install 3 push catches Replace 1 draw slider Install dishwasher integrated front

Cabinet Installation Labourer Needed (Melbourne) Location: Eastern suburbs Pay: $30–35/hour Duties: assisting installation, lifting, general labour No experience needed, training provided. Prefer language spoke Chinese Message me if interested

I had a new small basin and cabinet put in, and the pipes on one side are now exposed as I led water into the room on the other side of the wall. So need a carpenter or a handyman to build a small cabinet/like box around the pipes to cover them, so it’s all near and tidy. Thanks

I need a joiner to make and install two new sliding doors in MDF . I’m converting a built in bookcase into a wardrobe and the doors are to sit over the central unit. The opening measures 1780W x 1550H. I would like two doors This is for both supply and install included any hardware etc needed to install, and painting the MDF. I have the handles

Hi, I am wanting to convert these 2x cutlery draws and 2x pot draws, in to 4 cutlery/utensil draws as current cutlery draws to small and require better internal sorting trays/system. Finish is White/White venal wrap

Custom Joinery – Under Staircase Bench & Storage Looking for an experienced joiner/cabinet maker to design, build and install a custom under-stair bench with integrated storage. Scope of works includes: • Measure, manufacture and install a built-in bench cabinet to fully infill the nook under the staircase, finishing flush with nib walls on both sides • Approx. 400mm high bench seat with one row of three large drawers • Drawer fronts in Polytec laminate (Cassentino Beach Woodmatt or equivalent) with clean, handle-less finger-pull detailing • Cabinet to sit at floor level with a 20mm shadow line (no kickboard) • Supply and install a beige upholstered seat cushion suitable for a child reading nook • Plasterboard and finish the underside of the staircase, including stopping, sanding and paint-ready finish to match existing walls High attention to detail required to achieve a seamless, built-in look. Materials, workmanship and finish to a high residential standard. Refer to AI generated image as a guide. Please include examples of similar joinery work and availability to quote on site.

I need someone who does this type of thing for a living. Not a home handy man who wants to give it a go like me. I've just replaced the blades on my HalfCo WoodMaster 2015. I need the blades adjusted so they will cut flush. There are only two blades. I can bring it to you if you are in the Glen Iris 3146 area.

I have an outdoor BBQ unit. There are three tasks - 1. I need someone to repair the cabinet door that has come loose from its hinges. The hinge mounting plates have stripped out of the cabinet frame (see photo). This has been repaired before by the installer and failed. 2. The cupboards need cleaning. 3. I need a way for the doors to be secured closed, so that water/weather does not get inside the cupboards. I am guessing that water damage has caused this.

We have cabinets on site for installation, most rooms need 're work' on the cabinets pull apart, cut put back together than install. There are a few cabinets so 2 people or 3 is recommended. we need 2-3 guys for 3 days on site, we will come out and help guide you but after we will leave you to work.

I am seeking assistance to re-hang our joinery door. It fell off its hinges so I am unsure if there is any permanent damage to the hinges themselves. There is a Bunnings 5mins down the road if new hinges are required. The door is extremely heavy and will likely need two people to rehang.

Paint kitchen joinery including replacing hardware, possibly replacing bench surface

I have a front study room that i'd like wall panels added too on all three walls and ceiling (i've attached a reference photo of what i'm after). I want the entire room covered with this veneer. I have the veneer (58cmx250cm) - these will need to be applied to a thin plywood (or MDF) and then applied to the walls and ceiling. The room is approx. 2.8m long x 2m wide x 2.1m tall. I have attached a photo of the room (currently painted in green).

Open up a hole on the bottom of a drawer from underneath. The hole needs to be large enough to put a hand through.

Please help, I can’t unclip my drawer from Blum laundry unit to be able to plug in new washing machine. Located in Kew. Is there anyone local that could help please?

I have an old fuse box on the wall in my living room, approx 9cm deep/35.3cm wide/ 35.3 cm long. I would like something made to replace this (in white) that could perhaps also incorporates a display box (square shelf) of the same size at the bottom LHS corner. Not sure of the costs, my price is just a guesstimate.

We have left some joinery tools on site at a residential address in Melbourne (Camberwell). We need them picked up and brought to Sydney. (Tools: hand tools, festool track saw, power tools makita, circular saw, planer, jigsaw, hammer drill, impact driver, combi drill, ladder, tressel, screw boxes, laser level, vaccum, drop saw).

One of the panels on our double garage door has come loose. It looks like 2 of the connectors have come apart and need to be replaced. The connectors/joiners need to be replaced.