Find experienced local carpenters in Glen Waverley

Four jobs: 1) Install 2x Ikea Bergshult 1200 x 300mm shelves with 100mm QWORK® Floating Shelf Brackets. 2) Install 4x Ikea Bergshult 1200 x 300mm shelves with 100mm QWORK® Floating Shelf Brackets. 3) We want to install an Elite Twin 60L (380mm wide) in a cabinet that is too narrow for it (370mm wide). We need to remove the right melamine piece (16mm wide) and replace with something like a 3mm equivalent. Then replace base board. 4) Need to cut three melamine shelves to size.

Looking for an experienced cabinet maker to build and install a custom cabinet underneath my kitchen island. The first photo shows the current kitchen island. The second photo is a mock-up of the finished design I’m looking for. Scope of work * Build and install a custom built-in cabinet under the island. * Extend the cabinet beyond the existing 280 mm recess to achieve an overall cabinet depth of approximately 500 mm, as shown in the attached mock-up. * Maintain the existing island and benchtop (no changes to the stone). Dimensions * Overall island width: 3200 mm * Overall height: 860 mm * Existing recess depth: 280 mm * New cabinet internal depth: approximately 500 mm Cabinet design * Gloss white finish to match existing kitchen. * Handleless / push-to-open preferred. * Four equal-width top drawers. * Four equal-width lower cabinet doors. * All drawers and doors to have the same flat-panel design. * Cabinet to span the full 3200 mm width. * Left extension to be fully enclosed and incorporated into the cabinet (not just a decorative side panel). Internal layout * Approx. drawer internal height: 110 mm * Approx. lower cabinet internal height: 640 mm * Adjustable shelves inside each cabinet section. * Internal cabinet depth approximately 500 mm. Please include in your quote * Supply and installation * Materials and finish * Hardware (please specify brand, e.g. Blum / Hettich if used) * Estimated completion time Photos attached: 1. Existing kitchen island. 2. Desired finished design. Budget is indicative only. Happy to consider reasonable quotes.

Need someone help install cabinet that we brought, previous guys just installed half only door and cover need to install

Would like a carpenter or handyman to replace /repair two windows' trims (it appears just the bottom sides). Each window's width is 850mm. Painting won't be needed. The windows are located 3.5m from the ground. Please let me know the scope of works quoted. Thanks

Fill in 40mm wide gap with merbau deck. Price to be quoted in $ per m inclusive of materials and labour. Its about 16m long and one side only.

Open for recommendations and approach

Basin Removal and Stainless Steel Installation * Disconnect and temporarily remove the existing basin. * Install stainless steel panels/sheets as required and will be provided * Reinstall the basin after the stainless steel installation is completed. * Ensure all fittings are secure and the work area is left clean and tidy.

Wooden bench. Cut out a small section. Seal ends so water-proof

Need one under-sink kitchen cabinet replaced. Bottom hinge area has water damage and the hinge no longer holds properly. Looking for someone to: - install Cabinet frame and doors. Please quote labour + materials separately if possible. Location: Glen Waverly 400mm x 700mm (old Ikea dimension) & glossy.

Intial qoute for 1.Provide a hinge to fix the door of kitchen cabinet. 2.Fix the cabinet with the hinges (2). 3. glued the laminate of one side of cabinet door.

there are 5 wood window frames can't work properly. The supporting wood poles on the verandah appeared rotten. The door frame of the sliding door has a rotten spot.

Cabinets in Garage One wall 4.5 m wide x 3 m High Other wall 1.9 m x 3 m high

Need an experienced cabinet maker or joiner to install a few item in my houe. Kitchen, wardrobes, laundry, butlers pantry, vanity. Start date 13th.

Hi Guys, need a experienced cabinet maker to install some Cabinetry. Wardrobes, laundry, vanities. Let me know which. One you specialise in and i can forward drawings based on your experience and preferences. Start date 13th April. Most Cabinetry comes pre assembled, the wardrobes are flat packs and tall cabinet like pantry is flat pack.

Joinery company in Melbourne looking for an experienced cabinet installer for continuous work. Work includes: Kitchens, wardrobes and full house cabinetry installs We are looking for someone who: Has strong experience in cabinet installation Can complete jobs to a high standard (levelling, scribing, fixing) Works efficiently and reliably Has own tools and ABN Location: South-East Melbourne Budget: Competitive pay – day rate or per job (depending on experience) Ongoing work available for the right person Please provide: Photos of previous work Your experience Availability

Looking for a Cabinet repairer to fix my tall boy and bed side drawer to be fixed

The Microwave does not work, need to be removed and make place for a new one. Oven door does not close tightly, not sure if the spring or the rubber needs replaced.

Looking for a reasonable quote to add shelf to laundry room. Please refer the current and proposed design

Recessed channel for strip lighting and filler panels for cupboard

A mirrored cabinet door has fallen off as it is too heavy for the current hinge setup. The job requires reinstalling the door, repositioning all three existing hinges, and installing one additional hinge to properly support the weight. The door must be aligned correctly and open/close smoothly once completed. Please bring your own tools. Advise if additional hardware is required. The cabinet door and existing hinges are on site.