Find experienced local carpenters in Cranbourne

2 Cabinets (mirror image) with an opening in front and a side for a small dog to get in. Requirements: - Need to match Havana Furniture (Light Oak). - Inner dimensions need to be: D 60 x W 75 x H 43cm - Accessible through the top and hold it open 90-100 degrees. - Need to be on small, lockable wheels. - No screws or nails to be seen from the front or sides. The back and bottom are ok. Opening to the Enclosed Dog Bed Furniture: Aim is to make it as enclosed as possible for my dogs to keep warm when the heater is off. - There are two Circular openings (30cm) on each piece of furniture. One is in the front (9cm from the side & bottom), and the other is in the side closer to the front opening. One kennel has it on R) side, other on L) side - to be joined together)* the side openings must be identical as the two kennels meet, so my dogs can walk through the structure. - The inner side of the opening will need routed edges. I am open to suggestions. Rough designs are attached.

I am looking for someone to make 2 Indoor Dog Kennels of rectangular shape. Requirements: - Inner dimensions need to be 600 x 750 mm, 12-20mm thick, put together with glue & pocket holes. - Accessible through the top and have soft close latches on. - Opening to the kennel would be through a corner opening. (one kennel has it on R) side, other on L) side - to be joined together)* the opening must be identical in the corner where the two kennels meet. - Small Barn Door (need to have some opening to see through, e.g. horizontal bars or circles cut out) - seamless, no nails or screws to be seen from side or front * I will provide the Barn Door Hardware Kit - A locking system for the Barn Door would be nice - Needs to be on legs or lockable wheels. - Joining the front panel to the sides would be ideally with a 45-degree straight bevel cut (to make it seamless - I am open to suggestions) - Possibility for a ramp or step that would connect to both kennels. Materials: - Structure can be Plywood or Wood - Door can be any material (acrylic, wood, plywood, metal) I've made rough plans for the project, including dimensions (for 12mm thickness) on Fusion 360 that I am happy to share. Dimensions for individual panels with 12mm thickness: 4x Front & Back panels: 480 x 774 x 12mm 4x Left & Right panels: 480 x 600 x 12mm (or 480 x 612 x 12mm if one of the edges has 45-degree bevel edge) 2x Bottom panels: 624 x 774 x 12mm 2x Upper panels: 644 x 774 x 12mm Front & Side panels will have a cut-out door opening with rounded corners. (one kennel has it on R) side, other on L)side - to be joined together). - Front panel: 300 x 380 x 12mm - Side panel: 300 x 240 x 12mm *Positioned 90mm from the bottom and top.

Replace two posts only have the post, unable to do due to injury

I would like custom made cabinets and bench top for my laundry, laundry will be a blank canvas and all flooring, electrical and plumbing will be already done

Need carpenter to install new skirting boards And arkitraves around doors and windows Skirting and architraves will be supplied

Wall with double cavity door frame is completed by me. Just need a plaster and get rest done to a finish. All materials supplied. Just need a labour.

Experienced kitchen installer required for custom made medium to high end kitchens.

Need carpenter to straighten up house walls

Garden shed fixing the roof - Due date: Flexible

Timber decking stairs from the door to foot path - Due date: Flexible

I'm after someone to put up garage panels to cover inside shed - Due date: Flexible

Hello, I currently have an unfinished retaining wall that is connected to my neighbours backyard. It is currently an eyesore and I would like to make use of it. Would like to create an 'L' shape sitting bench in the corner that would be attached to the current retaining wall and my fence. To use either as seats or to hold some plant pots. (Will add examples of what I would like.) Just need simple seating. Can pay for the timber/materials, this price is for labour. Just need someone to build something sturdy. :) (Note, weeds will be cleared. There is currently bark underneath covering)

I have a blank wall and 3 x ikea cabinets that need to be assembled and wall mounted. Also need a trim of some sort to the ceiling to make it look inbuilt - Due date: Flexible

After a fully enclosed cat enclosure to match home. Roughly 7 meters long and about 3m wide with a secure roof and door to enter. Will want some cat runs and creative ideas for enclosure. Timber painted for completion. THIS TASK IS MATERIALS AND LABOUR INCLUSIVE - Due date: Needs to be done on Saturday, 3 February 2024

After quotes for composite decking and some tiled sleepers laid. Concrete slab for decking to go over and fit flush with back sliding door and brickwork. Price MUST include materials and labour - Due date: Flexible

1. Cut to size wood panels 2. Install them on wall 3. Build a small door frame 4. Cover small door frame with wood panel 5. Lay wood floors on floor 2×2meters 6. Cut 6 wood shelfs to size and attach front stick on edge. - Due date: Before Friday, 20 October 2023

Looking to build verandah. Need a drafter for council permit - Due date: Flexible

Need carpenter for new project. - Due date: Flexible

Hi I need someone to supply and install -timber bifold door for my study and walk-in wardrobe entry, property is in Smith lane Clyde north. - Due date: Flexible - Due date: Flexible

10.5x12m shed required installation. Ready to go - Due date: Flexible