A close up image of a carpenter sandoing a plank of wood
A close up image of a carpenter sandoing a plank of wood

Find experienced local carpenters in Clayton North

Fill a short form and get free quotes from local carpenters in minutes

4.3

Excellent rating - 4.3/5 (10900+ reviews)

A range of carpentry for all your needs

  • Cabinet making
  • Custom shelving
  • Wood repair
  • Custom made furniture
  • Deck sanding
  • … or anything else
It only takes 2 minutes. And it’s free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated carpenters near me

Recent Carpentry reviews in Clayton North

Outstanding plasterer. Great work, efficient and great comms. Highly recommend!

Plaster trim newly created entranceway

$200

Chris was fantastic! He was very knowledgeable, super fast and did a great job. Thanks!

Carpenter/cabinet Maker-fix cabinet &make oven fit

$300

Great Communication.

Custom wood box for DIY project

$250

Great job! Sanjin talked about what he needed to do as he was working so I was aware of what was happening. Friendly and easy to talk to. Thank you! I would have no hesitation in asking Sanjin to do other jobs.

Re-glue cornice at top of a wall

$60

Excellent job, professional and experienced person. Very honest about expectations and follow up. Definitely will use again in the future.

Stain decking.

$400

Great handy work!!!

Finish building our timber/steel gate

$55

What's the average cost of a carpenter in Clayton North

$80 - $350

low

$80

median

$120

high

$350

Low, median and high bar chart distribuiton

Average reviews for Carpentry Services in Clayton North

based on 21 reviews

5

21
0
0
0
0

Best rated joiners near me

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

25+

Tasks successfully completed

2

Average amount of offers per task

41

 mins

Average time to receive offers

Statistics from the most recent tasks on Airtasker since 23rd Dec 2020.

Airtasker has over 27 carpenters in Clayton North, with an average rating of 5.0 stars from 21 reviews. Get in touch with carpenters such as Brendan H, Sean S, and Vernon D today to get a wide variety of Carpentry jobs done.
Don't live in Clayton North? We also have carpenters available in Muddy Creek and Mulgrave VIC available today.

Recent Carpentry tasks in Clayton North

Shed Repair

$75

Clayton VIC 3168, Australia

3rd Dec 2024

Repair the doors of the shed

Extending decking and create two ramps

$5,000

Oakleigh East VIC, Australia

15th Nov 2024

To extend decking pictured by 4mx2.5 - 3 m- to have a ramp at end of decking approx 1 m wide x 3 m in length ( to accommodate wheelchair) The decking to be built where the trees are pictured in the photo and extending to approx. 2.5-3 m in width. The small decking is approx 28.5 cm in height. The decking and ramp to be created from merbau The trees and water feature will be removed.

Carpenter needed to make a internal wall for my property

$5

Clayton VIC 3168, Australia

30th Oct 2024

I need a carpenter to construct a wall and install a door jam and a door to my dining room, to separate it from the living room 2.8Wx2.7H 4.8Wx2.7H Just separate the dining and living areas of the house Just need to build a stud wall, door jam and a door Please quote

Need someone specialist for doors. Two doors at Clayton. $300.00

$300

Clayton VIC, Australia

29th Oct 2024

Installation of three doors. One is bifold. One is sliding in cavity and one normal external doors

Ikea wardrobe installation

$165

Clayton VIC 3168, Australia

15th Oct 2024

install ikea pax corner wardrobe (3.6m x 2.4m + .5m X 2.4m L shape) and build bulkboard on top to seal to the roof height (2.7m) 4 sliding doors (2 seperate sliders with 2 doors in each)

Build shelves in garage

$150

Clayton VIC, Australia

25th Sep 2024

Need shelves on the wall, no materials and parts supplied. Just need something practical but sturdy to hold garden tools and other things above 5kg in weight

Replace double external door

$5

Oakleigh East VIC, Australia

17th Sep 2024

Double external door from garage to garden needing replacing - remove old and install new. Measurements are 2040x730x40 (left) and 2040x700x40 (right). We can supply new door knob and the doors with mushroom stop, either cut to size or standard sizing (1x at 720 and 1x at 770) for tasker to cut to size. Please let us know either option in your offer. Tasker to reuse pre-existing floor latch but supply other parts required like hinges. We can also supply if you tell us what you need. Placeholder budget - please quote :)

Brendan was very flexible with timing and the doors were installed very neatly. Thank you!

I need floor and door work

$1,000

Clayton VIC, Australia

9th Sep 2024

Carpenter. I need floor, door and skirting work

Skirting board repair

$70

Clayton VIC, Australia

17th Jul 2024

I need someone to repair skirting board for a fridge space area.

Sean did a good job fixing the skirting boards, i would recommend him anytime

Fix the gap between kitchen benchtop and wall

$100

Clayton VIC, Australia

16th Jul 2024

As shown on the pictures, there is a gap between the sink/kitchen benchtop and the wall. One side of the benchtop sunk a little bit as shown on the picture which created a little gap between the benchtop and the wall. Task required: 1. Push up and support benchtop where it has sunk to even level. 2. Please remove the old silicon seal and re-apply new ones.

Install a Door in Room with No Existing Door Frame

$550

Clayton VIC, Australia

25th Jun 2024

I have a room in my home that currently has no door and no door frame, and I need a skilled person to install a door and door frame in this location, matching the style of existing doors. Job Details: The space is approximately 2400mm heigh, 900mm width and 120mm deep. Install a door frame and a door in a room with no existing door or frame. Ensure proper alignment and smooth operation of the door. Match the new door to the existing style of other doors in the house. Clean up of any debris or materials after the job is complete.

Vernon was excellent! Easy to communicate with, swift work, and very efficient. Highly recommend!

Finish this gazebo, roof and paint.

$700

Clayton VIC, Australia

9th May 2024

I've almost finished but need a hand. Gazebo is 2.7m x 3.9m. Just need to nail in the rest of the cross batons to hold up the roofing sheets (polycarbonate roofing). Then paint it. Then screw in the polycarbonate roofing sheets. Should take 2 days

Completion of the IKEA Pax wardrobes into a built-in appearance

$200

Oakleigh East VIC, Australia

11th Apr 2024

The IKEA wardrobes are currently positioned on a leveled platform and securely attached to the wall. The job is to ensure that all gaps between the walls, ceiling, floor, and the wardrobes are filled seamlessly, leaving no visible gaps once the job is completed. Pls quote includes all expenses such as labor, materials, cleanup, and any other necessary costs. Thank you.

Turn wardrobe into study noook

$250

Oakleigh East VIC, Australia

14th Mar 2024

I need someone to pick up a melamine sheet from bunnings and cut it to fit in wardrobe at desk height. Use offcuts make shelves please. Also patch a piece of plasterboard as has a hole in it. Remove cupboard doors

Riley was fantastic from first contact through to completion. Highly recommended

Install 5 shelves in room

$5

Clayton VIC, Australia

2nd Mar 2024

Hi can we pls get help in installing shelves and putting a moulding and patching up a small timber floor .

Great to work with .

Carpenter required to trim two doors

$120

Clayton VIC 3168, Australia

1st Mar 2024

I will be getting new floorboards installed in my apartment and need to have the bottom of 2 bedroom doors trimmed by around 1cm. Apartment is on the first floor with one flight of stairs. Visitor parking is available on the complex. There's no furniture in the apartment so the work can be done in the living room area.

Thanks Chi for the great work done!

Need a new post box installed.

$80

Clayton VIC, Australia

9th Jan 2024

The old concretepost post box which has damaged. The top part is still usable. Need a help to be removed. The top part of the current box can be easily removed. as you can see in the attached photo. replaced with new one. I will provide the post box - Due date: Flexible

Build some timber walls for my market stall

$300

Clayton VIC, Australia

4th Dec 2023

I am looking for someone to build some walls for my stall at waverley antique bazaar. The wall panels will need to be built in sections offsite as we are not allowed to construct them in the store. They can then be assembled together Instore and dynabolted to the concrete floor. I just need the timber frames no paneling just the frames 2.5 x 3m is the stall size Wall height I would like is 2.4m Looking for someone to install these by Friday at the latest. Store is open 10-5 so installation can only been done during those hours - Due date: Needs to be done on Wednesday, 6 December 2023

Great customer service, worked quickly and efficiently. He was easy to communicate with and did a great job building some walls for my stall at Waverley Antique Bazaar. Thankyou

Cut laid asphalt 10 centimeters deep

$400

Clayton VIC, Australia

16th Nov 2023

Asphalt is currently blocking storage containers from being removed, needs to be cut back. The area needing to be cut is roughly 10 meters in width, 1 meter length and 10 cm deep - Due date: Before Friday, 17 November 2023

Restore this vintage table

$200

Oakleigh East VIC, Australia

16th Aug 2023

I have found an old table that had a sewing machine attached to it, which I have removed. I'm looking for an experienced person to fill the large gaps and holes where the machine used to be attached. Would then need some sanding down of the surface to finish it. Dimensions attached in photo. Table surface is 30mm thick. Looking for someone to complete the work on site at my house. - Due date: Flexible