Find experienced local carpenters in Berwick

I need 1 kitchen cabinet above fridge space installed and 4 floating shelves put up. (See current photo and example attached)

We need our back deck cleaned and stained, including the deck around the pool area. Open for discussion around painting or staining the deck. Price negotiable to be discussed when arranging job.

Need quote from an experienced carpenter (Having right tools like "Plunge Router" to cut deep, precise mortise slot in Solid wood timber door, edge to fit multipoint lock mechanism & faceplate sit flush & hidden inside timber) to supply & install a (multipoint lock with top, middle & bottom locking points with one handle, retrofitted to my solid timber front door in Berwick, 3806). The door currently has a single deadbolt & all work will be done on-site at my home. [Pictures Attached] Please provide an itemised quote (Including GST) covering: 1) Full Labour / Installation Charges [Including each & everything need to be done, with no hidden cost, e.g. Removing & rehanging the door, Door routing, frame work etc) 2) The lock mechanism Brand name & price. (including handles, cylinder, keys everything) 3) Door Size (H 236 cm, W 120 cm, Thickness 4 cm) 4) Youtube Videos explaining what I need. https://youtu.be/21tcFd7PbC0 https://youtu.be/NOb1CqBTT60

Sand back over benchtop shelves and bull head (all timber shown in photos) two more coats of stain and then 1 coat of clear coat. All stain and clear coat supplied. Small bull head on its own requires first coat then light sand then two more coats of stable before clear coat. Electric lift available to use if preferred over ladder

Need to cut the dry wall and install small narrow door to access storage. I have attached the photos of the wall during the build and now. Don’t need to install shelves or flooring. Just the door install only. Please provide quotes. Site visit welcome. Located in Berwick.

I need a quote for cabinet for new dwelling fitted and installed with stone bench as well.

I need to hand 4 timber shelves (Adairs Mark Tuckey Boston Oak Wall Shelf) in a bedroom. Most likely these will next to fix into paster.

I am ordering flat-pack drawers to be installed in my WIRs. They are flat packed, so I need someone to put them together first. And then if possible install them in my WIRs so they look flush and built in. I need someone who has experience with cabinets and installing them to look built in and professional. If this goes well, then I also need cabinets to be installed in my Garage and study (for books). Rough image of what my drawers look like is attached.

Pergola timber needs change . Timber rotten on the circled area in the pic so need to change the whole timber around 6.meters will buy timber, please quote a price

Kitchen cabinet alteration to accommodate fridge

I need a carpenter or experienced handyman to inspect and repair/replace a rotten timber door threshold (door sill) at my back door. The timber has rotted due to water damage, and part of the threshold has collapsed. Please see attached photos. I’d like a proper repair rather than a temporary patch. Please provide a quote including labour and materials.

Need a fix carpenter for half a day to complete following tasks: Kitchen: Nail 5 m2 of cement sheet (already installed with nails to corner) Secret nail and glue 2.5 linm of timber floating floor on the edge Adjust pantry door hinges to align doors L’dry: Hang one 720 door and Install 1 dummy handleto flash panel doors and align double doors Powder room: Install toilet roll holder Install 300mm towel rail Install door stop on tiled skirting Ensuite- hang mirror on tiled wall Put 2 doors back that were removed from lift off hinges for painting All materials are provided, except nails

Looking for cabinet maker. Approx 1.5 meter area also want to install more shelves in current wardrobe

Install imported cabinets from china. Preassembled. Nearly 100 cabinets

Need an experience carpenter to hang 2 vanities and couple of architraves Start around 4pm (can push to 5 if needed) Screws for vanity provided Just need fixing nails for architraves and tools for work

Wanted: Cabinet Maker / Joiner – Custom Laundry Washer Dryer Stack Looking for someone in Melbourne (Berwick area) to build a custom washer/dryer stack cabinet for a laundry renovation. After something modern and minimal similar to the attached inspo: - White finish - No overhead cupboards - Shelf between appliances - Clean built-in look Approx dimensions: - 900mm wide - 600mm deep - 1900mm high approx Will be for stacked front loader washer + dryer. Happy to organise install separately if needed. I’ll likely complete the rest of the laundry with Kaboodle cabinetry. Thanks!

Need a floating tv cabinet made and installed approximately 3 metres x 50cm height x 40cms depth, with doors and also a centre open section. Has to be black

Need an experienced interior painter to repaint a small stained area in a lounge room in a rental property. Scope of work: * Repaint approximately 6–10 m² * Area includes part of the wall, ceiling, and cornice * Staining/ghosting is in one corner of the lounge near the split system * Surface may require proper cleaning/prep and stain-blocking primer/sealer before painting * Finish should blend as closely as possible with the existing paint Requirements: * Experience with interior painting * Experience with stain/sealer work preferred * Must provide your business name, ABN, contact number, and email * Please include whether you are insured * Please provide a quote for labour + materials * Please mention your earliest availability Location: Berwick / Officer area, VIC Please quote for a small professional job only, not a full-house repaint.

I would like a quote for building steps to my existing pergola plus a solution to finish off the pergola. Please see photos.

I need a professional installer to assemble prefabricated banquette seating base on site, you would need to glue brass laminate on kicker face on site. Curved banquette slit into 8 sections. Kicker and seat base a separate frames. I can provide all tools, if needed, including spray guns and contact adhesive, screws, etc. Please note, the offer is rate per hour. Scope of work, hours are subject to agreement.